Gemini CD-9500 Pro IIIの取扱説明書

ページ1に含まれる内容の要旨

GEMINI
CD-9500 PRO III
Professional
Dual
CD
Player
OPERATIONS MANUAL

ページ2に含まれる内容の要旨

4 15 16 13 14 3 7 8 12 11 5 10 9 6 1 3 2 2 1 2 1 20 20 17 21 18 19 21 18 19 1 2 Page 1

ページ3に含まれる内容の要旨

Pushing the POWER SWITCH (1) a second time will turn the unit off. INTRODUCTION DISC TRAY: The DISC TRAY (2) is where the CD is held during loading, Congratulations on purchasing a Gemini CD-9500 PRO III Dual CD Player. unloading and playback. Pressing the disc tray OPEN/CLOSE This state of the art professional CD player is backed by a three year BUTTON (3), will open or close the tray. The DISC TRAY (2) holds warranty, excluding lasers. One year warranty on CD lasers. Prior to both 12 cm and 8

ページ4に含まれる内容の要旨

and will skip on most or all CD players. Before sending the unit in for OPERATING INSTRUCTIONS repair, try playing a CD that you are sure plays properly. 1. Make sure that the VOLTAGE SELECTOR SLIDE SWITCH (15), found on the rear panel, is set for the proper voltage. Plug the unit in SPECIFICATIONS and press the POWER SWITCH (1). The unit will turn on. Pushing the POWER SWITCH (1) a second time will turn the unit off. GENERAL: 2. Press the OPEN/CLOSE BUTTON (3), place a CD in the DISC TRAY Type.