ページ1に含まれる内容の要旨
JDV8035
3.5” TFT Multimedia Player/Receiver
Installation and Operation Manual/Manual d’Utilisateur
2 ZONE
JDV8035
2ZONE
ページ2に含まれる内容の要旨
JDV8035 Pour des instructions en Francais, référez-vous à la page 30. SAFETY INFORMATION When Driving Protect the Disc Mechanism CAUTION: Keep the volume level Iow enough to be aware Avoid inserting any foreign objects into the slot THIS MOBILE DVD PLAYER IS A CLASS I of the road and traffic conditions. of this player. Failure to follow this may cause LASER PRODUCT. THIS UNIT USES A malfunction or permanent damage. VISIBLE/INVISIBLE LASER BEAM WHICH When Car Washing COULD CAUSE HAZARDOUS RAD
ページ3に含まれる内容の要旨
JDV8035 SUPPORTED DISCS AND MEDIA FORMATS Compatible Disc Formats Compatible Media Formats Disc Maintenance • Digital Versatile Discs (DVDs) Audio Format Before playing, wipe the disc • Video CDs (VCDs) Playback CD-DA and MP3 or WMA digital using a clean cloth, working • Digital Versatile Discs Recordable(DVD+/- music file on CD-ROM or DVD-ROM or from the center hole towards the R) Memory Card. outside edge. • Digital Versatile Discs Rewritable(DVD+/- MP3 and WMA notes: Never use benzene, th
ページ4に含まれる内容の要旨
JDV8035 INSTALLATION INSTRUCTIONS sleeve. With the sleeve fully inserted into Before You Begin DIN Front Mount (Method A) the dashboard opening, bend as many of 1. Disconnect battery negative terminal. 1. Slide the mounting sleeve off of the chassis the tabs outward as necessary to firmly 2. Remove transport screws. if it has not already been removed. If it is secure the sleeve to the dashboard. locked into position, use the removal keys Important Notes 4. Place the radio in front of the d
ページ5に含まれる内容の要旨
JDV8035 vided. Bend the strap, as necessary, to (when re-attaching, point the edge with the position it. CAUTION: The rear of the radio groove downward and attach). must be supported with the strap to prevent 2. Insert the removal keys straight back until damage to the dashboard from the weight they click, and then pull the radio out. If of the radio or improper operation due to removal keys are inserted at an angle, they vibration. will not lock properly to release the unit. Dashboard Dashb
ページ6に含まれる内容の要旨
JDV8035 maximum screw size. Longer screws may DIN Rear Mount (Method B) Reconnect Battery damage components inside the chassis. This unit has threaded holes in the chassis side When wiring is complete, reconnect the battery panels which may be used with the original negative terminal. factory mounting brackets of some vehicles to mount the radio to the dashboard. Please consult with your local mobile stereo shop for assistance on this type of installation. Screws 1. Remove the existing fact
ページ7に含まれる内容の要旨
JDV8035 WIRING DIAGRAMS Audio/Video Connections Electrical Connections SUB-WOOFER OUTPUT BLUE SUB SUB-W OUT (Not supplied) WOOFER ANTENNA FUSE ANTENNA EXTENDER JACK CABLE 20-PIN AUDIO/POWER (Not supplied) External Remote Sensor / Repeater Not Included HARNESS RCA-TO-RCA In This Packing. Sold Separately (See Figure 1 ) GREY WHITE CABLES PINK EXTERNAL REMOTE JACK EXTERNAL REMOTE REAR RECEIVER CHANNEL REMOTE RED BLACK WHITE AMP VIDEO INPUT YELLOW
ページ8に含まれる内容の要旨
JDV8035 DETACHABLE CONTROL PANEL • DO NOT insert the control panel from the Removing the Control Panel Attaching the Control Panel left side. Doing so may damage it. The front panel release button (3) releases the Before re-attaching the front panel, make sure • Do not put pressure on the display or mechanism that holds the front panel to the the electrical terminals on the back of the panel control buttons when handling the front chassis. To detach the front panel, perform the are free of dus
ページ9に含まれる内容の要旨
U N JDV8035 REMOTE CONTROL The remote control will allow you to control the 7. Mute • Track Number Entry advanced functions of the JDV8035. 8. Tune Up/Fast Forward • File Number Entry 9. Tune Down/Fast Reverse 22. 4 10. Left • Tuner M4 recall, Memory 4 9 11. Right • Track Number Entry 12 12. Up • File Number Entry 1 2 13. Down 23. 5 8 10 14. Seek Up • Tuner M5 recall, Memory 5 4 5 MODE • Radio Tune • Track Number Entry 11 15 VOLUME 16 •Track Up • File Number Entry 6 17 • File Up 24. 6 13 14 •Nex
ページ10に含まれる内容の要旨
JDV8035 29. Press repeatedly to select a number in the Operating Range Replacing the Battery tens position for direct track entry (for The head unit remote When the range of operation of the card remote REMOTE SENSOR example, to select track “44”, press the +10 control sensor (22) is control becomes short or stops functioning, button four times and then press the 4 but- located on the right side replace the battery with a new lithium battery. ton). of the control panel. Be sure to observe t
ページ11に含まれる内容の要旨
JDV8035 OPERATING INSTRUCTIONS Front Panel Open/Close AV IN/OUT Connector NOTE: It is a characteristic of LCD panels This unit is equipped with an advanced full logic Use the AV IN/OUT connector (21) to connect a that, if subjected to cold temperatures for an motorized slide down front panel. portable media device for playback through the extended period of time, they may take Press the OPEN button (8) to open the closed vehicle sound system. longer to illuminate than unde
ページ12に含まれる内容の要旨
JDV8035 Display Selector (D) System Menu (D/MENU) Angle Turn the rotary encoder to adjust the angle of You can change the way playback information Press and hold the D/MENU button (7) for more the front panel upward by choosing a setting is displayed to suit your needs. Press the D/ than 3 seconds to display the system menu. from “00” to “12”. DISP button (7) to alternate between the Image You can then press the D/MENU button Contrast Display and Big Font Interface screens, shown repeatedly
ページ13に含まれる内容の要旨
JDV8035 Date Set Programmable Turn-On Volume (Vol PGM) X-Bass Turn the rotary encoder to adjust the DATE/ Turn the rotary encoder to select the default Only appears when X-Bass function is turned MONTH/YEAR. Press the rotary encoder (4) to turn-on volume level. “VOL PGM 12” is the on. See “Bass Boost (iX-BASS)” on page 15. confirm each entry and move to the next field. default setting. BASS Clock Rear Speaker On/Off (Rear Spk) To adjust Bass options, press the rotary Turn the rotary encoder (4
ページ14に含まれる内容の要旨
JDV8035 chart depicts the curve characteristics for Treble Bass Quality Factor Curve Characteristics each step: To adjust Treble options, press the rotary encoder (4) repeatedly until “TREBLE” appears Middle Quality Factor Curve Characteristics in the display. Continue pressing the rotary encoder to access the following Treble settings: • LEVEL Turn the rotary encoder clockwise to increase or counter-clockwise to decrease the Treble level from “-6” to “+6”. “00” represents a flat response.
ページ15に含まれる内容の要旨
JDV8035 Balance iX-BASS button (16) on the front panel and To adjust the balance from “L12” (full left) to then use the rotary encoder to select “LOW”, “R12” (full right), press the rotary encoder (4) “MID”, or “HIGH”. “XBAS” appears on the LCD. until “Balance” appears in the display. Turn the Press the IX-BASS button again to turn X-Bass rotary encode adjust the balance between the off. left and right speakers. “C00” represents a center balance. Fader To adjust the fader from “F12” (full
ページ16に含まれる内容の要旨
JDV8035 TUNER OPERATION AM/FM Band Selector (BAND) remaining five presets on the current band and for presets on the other four bands. Press the B/BAND button (20) to change between three FM and two AM bands. Each Preset Scan band stores up to six preset stations. Press the AS/PS button (15) to scan and play Manual Tuning each preset station for 5 seconds each. Press AS/PS again to stop preset scan. Press the tune/track |||< button (18) to manually tune the radio station higher or press th
ページ17に含まれる内容の要旨
JDV8035 DISC OPERATION Insert Disc (OPEN) Controlling Playback When the track is finished, the next track will play automatically. Press the 2/STOP button Press the OPEN button (8) to open the front After inserting an audio disc, the player (11) to stop playback of the current file. panel and reveal the disc slot. With the label automatically plays the first track. The elapsed surface facing up, gently insert the disc into the playing time is displayed at the top of the • Use the , , o
ページ18に含まれる内容の要旨
JDV8035 Disc Stop 3. Use the number keys on the remote control 2. Use the / buttons on the remote con- Press the 2/STOP button (11) to stop disc play to enter the track number or elapsed time trol to select Time or Title/Chapter/Track and retain the playback position (DVD, VCD, directly. search. CD). Press 2/STOP twice if you want to resume 4. Press the OK button to confirm and begin • Select “Time” to jump to a specific place playback from the beginning of the disc. Press playback. on the
ページ19に含まれる内容の要旨
JDV8035 function, the elapsed time of each track will be navigate the file list. Press OK to confirm and • DVD AUDIO: Press the DVD AUDIO button shown on the display panel. play the selected file. on the remote control or press and hold the 6 \/ button (6) on the control panel to Repeat Play choose an alternate audio language, if Press the 3/REPEAT button (17) multiple times NOTE: The JDV8035 will display ID3 available. during playback to select from the following information (Name, Album,
ページ20に含まれる内容の要旨
JDV8035 on the control panel to view the elapsed • Use the tune/track |||< and >||| buttons (18, playing time and remaining time. Press 19) on the control panel or the / twice to additional DVD information buttons on the remote control to view the including disc type, current title, selected next/previous page of thumbnails. angle, subtitle information, audio language, • Press the OK button on the remote control etc. Press a third time to return to normal or the rotary encoder button (4
