ページ1に含まれる内容の要旨
Exhaust Type Tumble Dryer
HDM3.5-1
ページ2に含まれる内容の要旨
Important Safeguards To reduce the risk of fire, electric shock or injury when using electrical appliances, please follow these basic safety precautions: FOR YOUR SAFETY • Do not place items that have been soiled with Read all instructions carefully, even if you are flammable liquids inside the dryer without familiar with the appliance. washing them with detergent thoroughly first. • This appliance is not intended for use by • Do not excessively bend, stretch, twist the children o
ページ3に含まれる内容の要旨
Name of Components 3
ページ4に含まれる内容の要旨
Operating your Dryer Electrical Requirements • To ensure you get the most out of the Connect the unit to a standard earthed three pin Anti-wrinkle function, do not overload the dryer, outlet. and remove the dried items from the dryer as The power supply must be 220-240V. soon as they have finished tumbling. Hang on coat hangers and iron the items if desired. • Prior to loading the dryer check that the items do not have the following symbols on them. • If they do, do not dry them
ページ5に含まれる内容の要旨
Control Panel Functions Temperature Selector Button Select ‘Strong’ for items that are particularly bulky or large quantities. Select ‘Soft’ for materials like Silk, Nylon, Linen etc. Drying Timer Dial There are five drying combinations available: Cool, Anti-wrinkle, Warm, Hot and Air Dry. Air Dry:This function runs Cool: This function cools the items with cool air,primarily to that have just been dried. air and freshen clothes The drum continues to turn but the that have been sto
ページ6に含まれる内容の要旨
Wall Mounting Instructions Installation Instructions 1. Determine the location of the dryer on the Where to place your dryer wall and mark the bracket position. Place the dryer in a dry, well ventilated area, away from heat and direct sunlight. * A minimum 50mm is needed between the top of the dryer and the ceiling for ease of installation. If the dryer is not wall mounted, it must be placed on a firm level surface. Do not place the dryer on carpet * If mounting above a washing mac
ページ7に含まれる内容の要旨
Wall Mounting Instructions 3. To install the hook to the dryer, remove screws 1, 2, 3 & 4 as indicated in Fig. 2. 4. Align bracket as shown in Fig. 3 and refit screws tightly. 5. Remove lower side screws and install the spacers provided as per Fig. 2. 6. Install exhaust duct: for upwards discharge, join sections 1 and 3, for downwards discharge, join sections 1, 2, 2 & 3 as per Fig. 4. 7. With assistance, mount dryer on wall brackets. See Fig. 5. 7
ページ8に含まれる内容の要旨
Maintenance Cleaning of the Air Intake Filter Cleaning the Lint Filter The filter should be cleaned once a month. Hold Unplug the power cord prior to any cleaning. The lint the upper and lower edges of the air intake shroud, filter must be cleaned before and after each use. push upwards gently with your thumb to Never use the dryer without the filter in place. disconnect the latch hook then pull outwards to remove. Remove the filter from the shroud and 1. Removing the Filters clean
ページ9に含まれる内容の要旨
Troubleshooting Review the following pages before calling for service. Problem Possible Cause What to do Timer knob does not • Is the power on? • Insert the plug and turn on. turn. Drum does not turn. • Is the door closed? • Close the door. • Is the power on? • Insert the plug and turn on. • Is there power to the wall socket? • Check another appliance in the wall socket. Exhaust air is not hot. • Is the timer incorrectly set on cold air? • Set the timer to hot air. The laundry
