ページ1に含まれる内容の要旨
Exhaust Type Tumble Dryer User's Manual
HLP140E
Please read this manual
carefully before using.
Retain it for future reference.
ページ2に含まれる内容の要旨
Names Of The Parts Transparent Windows Drum Exhaust Shroud Door Door Air Intake Shroud Control Panel Door Gasket Power Cord Exhaust Vent Casing Back Cover Please check if the power receptacle has good earthing Condition before using to guarantee your safety. The manufacturer will not take responsibility for those Risks occurred from not obeying this manual. 1
ページ3に含まれる内容の要旨
Important Safety Instructions Warning-To reduce the risk of fire ,electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: 1.Read all instructions before using the appliance. 2.Do not dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry cleaning solvents, or other flammable or explosive substances, as they give off vapours that could ignite or explode. 3.Do not allow children to play on
ページ4に含まれる内容の要旨
Important Safety Instructions 13.The interior of the appliance and exhaust duct should be cleaned periodically by qualified service personnel. 14. Do not place items exposed to cooking oils in your dryer. Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire. 15.Keep your dryer away from combustible materials (such as gasoline) during operation to prevent the risk of fire. 16.Do not use or place stove, gas device, water heater, tin
ページ5に含まれる内容の要旨
Important Safety Instructions 26.When normally using, the power cord of dryer shall be easily plugged or unplugged by hand. It must be unplugged during power blackout, moving, not in use or cleaning. Do not plug or unplug the power cord with wet hands. 27.Always disconnect dryer from electrical supply before attempting any service. Disconnect power cord by grasping the plug, not the cord. 28.Do not block the exhaust vent when dryer operating to prevent it from overheating or
ページ6に含まれる内容の要旨
Operation Cautions Avoid to dry starched clothes in Clothes with ribbon or lace should be dried in a nylon net your dryer to prevent link filter Put chemical fiber and/or clothes from clogging, which may lead with ribbon or lace to bad exhaust performance. into a nylon net before drying. Put rumpled clothes in order Put all clothes in order after Clothes with zipper dehydrated Dry this kind of clothes with zipper before drying zipped or fastener them. buckled and inside out (to reduce th
ページ7に含まれる内容の要旨
6
ページ8に含まれる内容の要旨
Hoop around the joint of the exhaust pipe and the dryer 7
ページ9に含まれる内容の要旨
Using Method 1. Plug the power cord The appliance shall be supplied with120V,60Hz, connected to a special receptacle more than 15A (reliably grounded). 2. Place the dehydrated clothes in your dryer Check the following items before putting clothes in. They shall be loaded in such a way that 2-3 pieces each time and not in a group to avoid tangling, which is not easy to turn it over resulting in uneven drying since the clothes were wrapped. Please put clothes into the drum. Avoid clothes being
ページ10に含まれる内容の要旨
Using Method 3. Drying Procedure Setting Instruction for the operation button a Status and implication of the indicator light Flash- indicates the program that is functioning On- indicates the program that is going to function or the state that has been chosen Indicator lights of the status 150 Status A The implication of the U 120 Normal Dry indicator lights. T Dry O Cool Down 90 Heavy The dryer is working. D Cool Down R Cycle End 60 Delicate Y The cycle will be comple
ページ11に含まれる内容の要旨
Using Method 'PowerOn/Off ' button Press in the 'PowerOn/Off' button to connect the power connector. Press in the 'PowerOn/Off' button to cut off the power connector after there is power to the machine. Press in the 'PowerOn/Off' button to connect the power connector, then press in the 'Start/Pause' button, if not, the machine will cut off the power connector by itself. High Power Low On/Off Air-Dry Start Pause Temp 'Start/Pause' button When you choose 'Timed dry',
ページ12に含まれる内容の要旨
Using Method Operation button using procedure and instruction for each step b HLP140E Status 150 A U 120 Normal Dry T O High Cool Down 90 Heavy D Power R Cycle End 60 Delicate Low Y On/Off Clean Lint 30 Timed Dry Air-Dry Start Pause Dry Cycle Temp Time Power Power Press in the 'PowerOn/Off' button to run the machine. On/Off On/Off Press in the 'Cycle' button to choose appropriate mode. The clothes dryer is originally set as 'Normal ' when the power is on . You may want to choose other cyc
ページ13に含まれる内容の要旨
Using Method Press in the 'Dry Time' button to set appropriate drying time. Dry Dry Time Time For 'High' and 'Low' mode,you can choose drying time freely. For 'Air Dry' mode, only 30 or 60 are available. Attention Please choose the drying time and Temperature according to the quality and quantity of the garments. Heating apparatus won't heat in 'Air dry' mode, and is proper for down, sweater, mohair, cotton sweater, cotton-padded clothes. You may choose this mode to make garments fluffier aft
ページ14に含まれる内容の要旨
Using Method 4. Take out the clothes when the program is finished There comes a beeper alarm when the drying procedure is done, the dryer will cut off electricity by itself after giving alarm. Stop heating 10 minutes before the program finish, cold wind blowing makes the dryer become cool gradually and the temperature of garments will be lower. If you want to take out clothes in the middle of high temperature operation, please firstly make the dyer cool and then take out the clothes. Unde
ページ15に含まれる内容の要旨
Care And Cleaning Clean the buildup such as lints on filters in time after each use, otherwise it will affect the performance of your dryer. Please unplug the power cord first when cleaning it. Cleaning of filters The lint filter must be used for drying. The filter fixed in the bottom of the drum It must be cleaned in time befor and after each use. 1. Remove the filters Remove by pulling straight up with hands inserted into the four holes around the exhaust vent shroud in the sequence of "Exha
ページ16に含まれる内容の要旨
Trouble Shooting (If problems occur, please pull out the plug to check)Before calling out a Service engineer have a quick look through the following fault list- it could have save a lot of time and trouble. If your machine is still not working properly you should contact your nearest Service office or obtain after sales service quickly. Please do not fix the machine by yourself. SYMPTOM CAUSE CURE No power to machine Reset circuit breaker; use the Is the plug properly put in the machine when
