ページ1に含まれる内容の要旨
SPECIFICATION
GENERAL LEGACY
Supply Voltage DC 13.8V. Negative Ground
Current Consumption Max.7A
Power Output 40W X 4.
LCD75DFX
Unit Dimensions 178[W] X 50[H] X 165[D] mm.
FM SECTION
Frequency range 87.5MHz -107.9MHz (USA)
87.5MHz -108.0MHz (EUR)
Effective sensitivity 3uV.
INSTRUCTION MANUAL
I.F Frequency
ページ2に含まれる内容の要旨
TROUBLE SHOOTING DEAR CUSTOMER: Before using the check list please make all the connections first. Thank you for your purchase and confidence in all kinds of audio-visual products of ours. If you still have questions after going through the checklist, please consult Selecting fine audio equipment such as the unit you have just purchased is only the start your local customer service representative. of your musical enjoyment. Now it is time to consider how you can maximize the fun and excitement
ページ3に含まれる内容の要旨
PRECAUTION OF DISC PLAY: BASIC OPERATING OF FUNCTIONAL KEYS Cleaning the CD: Before playing a CD, wipe it off with a clean, dust-free cleaning cloth. Wipe the disc in the direction of the arrow. Always insert the CD with the label side facing upwards. If the CD is inserted with the printed side facing downwards, the device may be damaged. 1. OPEN BUTTON Press the OPEN button to fold down the front control panel. Then a CD can be inserted into the CD slot or ejected by pressing the EJ
ページ4に含まれる内容の要旨
SEEK 1/ 2 (only available during radio operation) Seek function with the or button during radio operation. You can select SEEK 1/ SEEK 2 by using the +/- button. SEEK 1: Keep the or buttons pressed down and the radio will stop at the next station that is detected. SEEK 2: As long as the or buttons are pressed down the search function will continue in the frequency band. VOL LAST/VOL ADJ
ページ5に含まれる内容の要旨
b) During CD mode: WIRING DIAGRAM Press the TOP button briefly to interrupt the playback of the CD. Press again to resume normal playback of the CD. ANTENNA PLUG Press the TOP button and hold for approximately 2 seconds to play the first track of the current disc. Press the INT button to play the first 10 seconds part of each track. FUSE 7A Press again to stop scan, while the currently selected track will be YELLOW CONSTAN
ページ6に含まれる内容の要旨
The Maintenance of Remote Control OPERATION OF REMOTE CONTROL: Note: REPLACE THE BATTERY OF REMOTE CONTROL: Before use this remote control, please make sure 1.Remove the battery holder as the direction indicated by the arrow. turn on the device by pressing the power button on 2.Replace the battery, Set a new battery properly with (+) side up. the front control panel. 3.Insert the battery holder. Push in the holder to the original position. 1. Power On/Off. 2. Mute Button 3. Loudness Button
