ページ1に含まれる内容の要旨
REFRIGERATOR
USER INSTRUCTIONS
THANK YOU for purchasing this high-quality product. If you should experience a problem not covered in TROUBLESHOOTING,
please visit our website at www.maytag.com for additional information. If you still need assistance, call us at 1-800-688-9900.
In Canada, visit our website at www.maytag.ca or call us at 1-800-807-6777.
You will need your model and serial number, located on the inside wall of the refrigerator compartment.
Para obtener acceso a “Instrucciones p
ページ2に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS WA RNING: To reduce the risk of fire, electric shock, or injury to persons when using the refrigerator, follow basic precautions, including the following: ■ Plug into a grounded 3 prong outlet. ■ Use nonflammable cleaner. ■ Do not remove ground prong. ■ Keep flammable materials and vapors, such as gasoline, away from refrigerator. ■ Do not use an adapter. ■ Use two or more people to move and install refrigerator. ■ Do not use an extens
ページ3に含まれる内容の要旨
Location Requirements Electrical Requirements WARNING WARNING Explosion Hazard Electrical Shock Hazard Keep flammable materials and vapors, such as Plug into a grounded 3 prong outlet. gasoline, away from refrigerator. Do not remove ground prong. Failure to do so can result in death, explosion, or fire. Do not use an adapter. Do not use an extension cord. To ensure proper ventilation for your refrigerator, allow for a ½" (1.25 cm) space on each side and at the top. When installing your Failure
ページ4に含まれる内容の要旨
Water Supply Requirements Connect the Water Supply Gather the required tools and parts before starting installation. Read all directions before you begin. Read and follow the instructions provided with any tools listed IMPORTANT: If you turn the refrigerator on before the water line here. is connected, turn the ice maker OFF. TOOLS NEEDED: Connect to Water Line ■ Flat-blade screwdriver ■ ¹⁄₄" Nut driver ■ ⁷⁄₁₆" and ¹⁄₂" Open-end or two ■ ¹⁄₄" Drill bit 1. Unplug refrigerator or disconnect po
ページ5に含まれる内容の要旨
Connect to Refrigerator Refrigerator Doors TOOLS NEEDED: ⁵⁄₁₆" hex-head socket wrench, #2 Phillips 1. Unplug refrigerator or disconnect power. screwdriver, flat-blade screwdriver, ⁵⁄₁₆" open-end wrench, flat 2" 2. Attach the copper tube to the valve inlet using a compression putty knife. nut and sleeve as shown. Tighten the compression nut. Do IMPORTANT: not overtighten. ■ Unplug refrigerator or disconnect power. 3. Use the tube clamp on the back of the refrigerator to secure the tubing to
ページ6に含まれる内容の要旨
Cabinet Replace Doors and Hinges 1. Remove ⁵⁄₁₆" hex-head hinge screws from handle side and move them to opposite side. See Graphic 1-1. NOTE: Graphic may be reversed if door swing is reversed. 2. Remove cabinet hinge hole plugs from cabinet top and 1. Replace the parts for the bottom hinge as shown. Tighten move them to opposite side hinge holes as shown in screws. See Bottom Hinge graphic. Replace the refrigerator Graphic 1-2. door. Freezer Door NOTE: Provide additional support for the
ページ7に含まれる内容の要旨
Standard Doors Door Removal & Door Swing Reversal (optional) Replacement 2 1-2 A A Base Grille A. Cabinet Hinge Hole Plugs B 3 A 1-1 A. Door Hinge Hole Plug A Top Hinge 5 /16 A. " Hex-Head Hinge Screws A B C A A. Flat-Head Handle Screws B. Freezer Door Handle A. Top Hinge Cover 5 /16 B. " Hex-Head Hinge Screws 4 C. Top Hinge A Center Hinge A. Door Handle Sealing Screws 7 A Front View Side View 5 B A. Center Hinge A. Door Stop Screw 5 A B / B. " Hex-Head Hinge Screws 16 B. Door Stop A. Do
ページ8に含まれる内容の要旨
Contour Doors Door Removal & Door Swing Reversal (optional) Replacement 1 Base Grille A 5 A. /16" Hex-Head Hinge Screws 2 A Top Hinge A. Cabinet Hinge Hole Plugs A 3 B A C A. Door Hinge Hole Plug A. Top Hinge Cover 5 B. /16" Hex-Head Hinge Screws C. Top Hinge 4 Removal of Door Stops A Center Hinge A B A. Door Stop B. Door Stop Screw B A. Center Hinge 5 B. /16" Hex-Head Hinge Screws Bottom Hinge 5 Reinstallation of Door Stops A B A A. Door Stop B B. Door Stop Screw A. Bottom Hinge 5 B. /16"
ページ9に含まれる内容の要旨
Adjust the Doors REFRIGERATOR USE Door Closing Using the Controls Your refrigerator has two front adjustable rollers – one on the right and one on the left. If your refrigerator seems unsteady or you For your convenience, your refrigerator controls are preset at the want the doors to close easier, adjust the refrigerator's tilt using factory. When you first install your refrigerator, make sure that the the instructions below. controls are still preset to the mid-settings as shown. IMPORTANT:
ページ10に含まれる内容の要旨
Style 2 Crisper Humidity Control (on some models) To Turn the Ice Maker On/Off: You can control the amount of humidity in the moisture-sealed To turn the ice maker ON, simply lower the wire shutoff arm. crisper. Adjust the control to any setting between LOW and To manually turn the ice maker OFF, lift the wire shutoff arm to the HIGH. OFF (arm up) position and listen for the click. LOW (open) for best storage of fruits and vegetables with skins. NOTE: Your ice maker has an automatic shutof
ページ11に含まれる内容の要旨
REFRIGERATOR CARE 3. Clean the exterior surfaces. Painted metal: Wash painted metal exteriors with a clean, Cleaning soft cloth or sponge and a mild detergent in warm water. Rinse surfaces with clean, warm water and dry immediately WARNING to avoid water spots. Stainless steel: Wash stainless steel surfaces with a clean, soft cloth or sponge and a mild detergent in warm water. Rinse surfaces with clean, warm water and dry immediately to avoid water spots. NOTE: When cleaning stainless ste
ページ12に含まれる内容の要旨
TROUBLESHOOTING First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions) to possibly avoid the cost of a service call. In the U.S.A., www.maytag.com In Canada, www.maytag.ca Refrigerator Operation The refrigerator will not operate The refrigerator seems noisy Refrigerator noise has been reduced over the years. Due to this reduction, you may hear intermittent noises from your new WARNING refrigerator that you did not notice from your old mo
ページ13に含まれる内容の要旨
The ice cubes are hollow or small Temperature and Moisture NOTE: This is an indication of low water pressure. Temperature is too warm ■ Water shutoff valve not fully open? Turn the water shutoff valve fully open. ■ New installation? Allow 24 hours following installation for the refrigerator to cool completely. ■ Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line. ■ Door opened often or left open? Allows warm air to enter refrigerator. M
ページ14に含まれる内容の要旨
® MAYTAG MAJOR APPLIANCE WARRANTY LIMITED WARRANTY For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or furnished with the product, Maytag brand of Whirlpool Corporation or Whirlpool Canada LP (hereafter “Maytag”) will pay for factory specified parts and repair labor to correct defects in materials or workmanship that existed when this major appliance was purchased. Service must be provided by a Maytag designated
ページ15に含まれる内容の要旨
Notes 15
ページ16に含まれる内容の要旨
INSTRUCTIONS D'UTILISATION DU RÉFRIGÉRATEUR Nous vous REMERCIONS d'avoir acheté ce produit de haute qualité. Si vous rencontrez un problème non mentionné dans la section DÉPANNAGE, veuillez visiter notre site Web www.maytag.com pour des informations supplémentaires. Si vous avez toujours besoin d'assistance, veuillez nous téléphoner au 1-800-688-9900. Au Canada, visitez notre site Web www.maytag.ca ou téléphonez-nous au 1-800-807-6777. Vous aurez besoin de vos numéros de modèle et de série
ページ17に含まれる内容の要旨
Avant de jeter votre vieux réfrigérateur ou congélateur : Mise au rebut de votre vieux réfrigérateur ■ Enlever les portes. ■ Laisser les tablettes en place de sorte que les enfants ne AVERTISSEMENT puissent pas y pénétrer facilement. Risque de suffoquer Enlever les portes de votre vieux réfrigérateur. Le non-respect de cette instruction peut causer un décès ou des lésions cérébrales. IMPORTANT : L'emprisonnement et l'étouffement des enfants ne sont pas un problème du passé. Les réfrigérateurs
ページ18に含まれる内容の要旨
REMARQUE : Il est recommandé de ne pas installer le réfrigérateur près d'un four, d'un radiateur ou de toute autre Spécifications de l’alimentation en eau source de chaleur. Ne pas installer le réfrigérateur dans un Rassembler les outils et pièces nécessaires avant de commencer endroit où la température baissera au-dessous de 55°F (13°C). l'installation. Lire et suivre les instructions fournies avec les outils indiqués ici. OUTILLAGE REQUIS : ■ Tournevis à lame plate ■ Tourne-écrou de ¹⁄₄
ページ19に含まれる内容の要旨
Raccordement au réfrigérateur Raccordement de la canalisation d'eau Lire toutes les instructions avant de commencer. 1. Débrancher le réfrigérateur ou déconnecter la source de IMPORTANT : Si on doit utiliser le réfrigérateur avant qu’il soit courant électrique. raccordé à la canalisation d’eau, placer la commande de la 2. Connecter le tube en cuivre au robinet d'arrivée d’eau en machine à glaçons à la position OFF (arrêt). utilisant un écrou et une bague de compression tel qu’illustré. Ser
ページ20に含まれる内容の要旨
Inversion de la porte (facultatif) Portes du réfrigérateur OUTILLAGE NÉCESSAIRE : Clé à douille, avec douille IMPORTANT : Si on souhaite inverser la position des portes pour hexagonale de ⁵⁄₁₆", tournevis Phillips n° 2, tournevis à lame plate, pouvoir les ouvrir dans la direction opposée, procéder comme clé plate de ⁵⁄₁₆", couteau à mastic de 2". suit. S’il n’est pas nécessaire de changer l’orientation des portes, IMPORTANT : voir la section “Réinstallation - Portes et charnières”. ■ Débr
