ページ1に含まれる内容の要旨
RFG237
**
RFG238
**
Refrigerator
user manual
English
imagine the possibilities
Thank you for purchasing this Samsung product.
D DA68-01827B-17.indb 1 A68-01827B-17.indb 1 2 2014. 5. 8. 4:39 014. 5. 8. 4:39
ページ2に含まれる内容の要旨
Features of your new Refrigerator KEY FEATURES OF YOUR NEW REFRIGERATOR Your Samsung French Door Refrigerator comes equipped with various innovative storage and energy- effi cient features. • Twin Cooling System The fridge and freezer have separate evaporators. Due to this independent cooling system, the fridge and freezer cool more effi ciently. Additionally, this separate air fl ow system prevents food odor of one compartment from seeping into other compartments. PLUS • Cool Select Pantry PLUS
ページ3に含まれる内容の要旨
Safety Information SAFETY INFORMATION Before using your new Samsung French Door Refrigerator, please read this manual thoroughly to ensure that you know how to safely and effi ciently operate the features and functions that your new appliance offers. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the app
ページ4に含まれる内容の要旨
Safety Information - Damage to the cord may cause a short-circuit, fi re and/or electric shock. • Do not use aerosols near the Refrigerator. - Aerosols used near the Refrigerator may cause an explosion or fi re. • This refrigerator must be properly installed and located in accordance with the manual before it is used. • Connect the power plug in proper position with the cord hanging down. - If you connect the power plug upside down,
ページ5に含まれる内容の要旨
• Do not touch the inside walls of the freezer or products stored in the freezer with wet hands. - This may cause frostbite. • Never put fi ngers or other objects into the water dispenser hole, ice chute and ice maker bucket. - It may cause personal injury or material damage. • Do not spray infl ammable gas near the refrigerator. - There is a risk of explosion or fi re. • Do not store volatile or fl ammable substances in the refrigerator. - The storage of benzene, thinner, alcohol,
ページ6に含まれる内容の要旨
Safety Information - Deterioration in the insulation may cause fi re. Wipe excess moisture from the inside and leave the doors open. - Otherwise, odor and mold may develop. • To get Best performance of product, - Do not place foods too closely in front of the vents at the rear of the appliance as it can obstruct free air circulation in the refrigerator compartment. - Wrap the food up properly or place it in airtight containers
ページ7に含まれる内容の要旨
Contents 08 Getting ready to install the refrigerator SETTING UP YOUR 09 Setting up the refrigerator FRENCH DOOR REFRIGERATOR 09 Removing the refrigerator doors 11 Disassemble the freezer drawer 08 12 Reattaching the refrigerator doors 14 Assemble the freezer drawer 15 Adjusting the doors 16 Making minor adjustments between doors 17 Adjusting the freezer drawer level 18 Checking the water dispenser line 19 Installing the water line 21 Us
ページ8に含まれる内容の要旨
Setting up your French Door Refrigerator GETTING READY TO INSTALL THE REFRIGERATOR Congratulations on your purchase of the Samsung French Door Refrigerator. We hope you enjoy the state-of-art features and effi ciencies that this new appliance offers. Selecting the best location for the refrigerator 2 inch 2 inch • A location with easy access to the water supply. • A location without direct exposure to sunlight. • A location with a leveled fl oor. • A location with enough space for the re
ページ9に含まれる内容の要旨
01 SETTING UP SETTING UP THE REFRIGERATOR Now that you have your new refrigerator installed in place, you are ready to set up and enjoy the features and functions of the appliance. By completing the following steps, your Refrigerator should be fully operational. 1. Place the refrigerator in an appropriate location with reasonable clearance between the walls and the refrigerator. Refer to installation instructions in this manual. (page 9, Selecting the best location for the refrigerator)
ページ10に含まれる内容の要旨
Setting up your French Door Refrigerator 3 2. Disconnect two connectors ( 3 ) at each side of the top cap, the one connector 4 ( 7 ) on right side door and the other connector ( 4 ) on left side door. Remove 3 the tube ( 5 ) with pressing the dark gray color part ( 6 ) of the water line coupler. 7 If a red clip is on the coupler, it must 5 CAUTION be removed before removing the tube. 6 Socket wrench 8 3. Remove the 3 hex head bolts ( 7 ) attached to the upper lef
ページ11に含まれる内容の要旨
01 SETTING UP DISASSEMBLE THE FREEZER DRAWER 1. Take out the upper drawer by lifting it up. Slot 2. Remove the tilting pocket ( 1 ) by pulling both support guards ( 2 ) upward at the same time. 1 2 3 3. Take out the lower basket ( ) by lifting the basket up from the rail system. 3 4. Remove 4 hex head bolts from both sides with a socket wrench (10mm). 5. Lift up the freezer door from the rails. Putting too much food into the freezer drawers can prevent the CAUTION freezer fro
ページ12に含まれる内容の要旨
Setting up your French Door Refrigerator REATTACHING THE REFRIGERATOR DOORS Assemble the refrigerator doors 1. Reattach the lower left and right door hinges ( 12 ). With a Philips head screwdriver, insert and tighten the screw ( 10 ) into the lower left and right door hinges. 12 10 With a allen wrench (3/16”), insert and tighten the 2 hex head bolts ( 11 ) into the lower left and right door hinges. 11 Allen wrench 2. Place the hole in the bottom of the door over t
ページ13に含まれる内容の要旨
01 SETTING UP REATTACHING THE REFRIGERATOR DOORS 3 4 4. Connect the water line ( 5 ) and then insert a clip on the coupler with pulling tube. Connect the one connector ( 4 ) on left side door, the other connector ( 7 ) on right side door and two connectors ( 3 ) at each side of the top cap. 3 7 The clip is enveloped inside of the top cap. 5 T Type A ype A T Ty ype B pe B • The Water Line must be fully inserted to the CAUTION center of transparent coupler (Type A) or th
ページ14に含まれる内容の要旨
Setting up your French Door Refrigerator ASSEMBLE THE FREEZER DRAWER Slot 1. Pull out the rails fully on each side of the cabinet. 2. Attach the freezer door front onto the open slots on the sides. Slot Slot Slot 3. Tighten 4 hex head bolts completely with a socket wrench(10mm). 4. Insert the lower basket ( 6 ) into the rail system. 6 5. Hook the ends of the tilting pocket ( 7 ) onto the brackets and push down until they are locked into place. 7 8 6. Insert the upper drawer. 9 9 Remov
ページ15に含まれる内容の要旨
01 SETTING UP ADJUSTING THE DOORS After putting the doors back on the refrigerator, make sure the refrigerator is level so that you can make fi nal adjustments. If the Refrigerator is not level, it will not be possible to get the doors perfectly even, which may cause moisture condensation and increased energy bills. For example, when the left side is lower than the right side, insert a fl at-blade screwdriver(-) into a notch on the left control lever, and turn it counterclockwise to level the d
ページ16に含まれる内容の要旨
Setting up your French Door Refrigerator MAKING MINOR ADJUSTMENTS BETWEEN DOORS Remember a leveled refrigerator is necessary for getting the doors perfectly fl ush. If you need help, review the previous section on leveling the refrigerator. When the left When the left door is lower door is higher than the right than the right door. door. Adjustment Adjustment part part 1. Pull out the freezer drawer ( 1 ), then you can see the lower hinge ( 2 ). 2. Insert the supplied allen wrench (7/
ページ17に含まれる内容の要旨
01 SETTING UP ADJUSTING THE FREEZER DRAWER LEVEL Adjustment part Freezer Drawer 1. Locate the height-adjuster ( 1 ) in the freezer drawer. Unscrew the 8 Phillips screws ( 2 ) slightly to loosen the door. 1 2 2. Loosen the controller screw ( 3 ) with a Phillips screwdriver(+). 3 3. Find the best level to align the door slope. Example) The slope is about 0.08”(2mm) as shown below. - Rotate the height adjuster to -2.0 to reduce the door slope. Slope Reference plane After ad
ページ18に含まれる内容の要旨
Setting up your French Door Refrigerator CHECKING THE WATER DISPENSER LINE A water dispenser is one of the helpful features on your new refrigerator. To help promote better health, the water fi lter removes unwanted particles from your water. However, it does not sterilize or destroy microorganisms. You may need to purchase a water purifying system to do that. In order for the ice maker to operate properly, a water pressure of 20~125 psi is required. Under normal conditions, a 170 cc (5.75 oz.) c
ページ19に含まれる内容の要旨
01 SETTING UP INSTALLING THE WATER LINE Connecting the water supply line to the refrigerator. There are several items that you need to purchase to complete this connection. You may fi nd these items sold as a kit at your local hardware store. Use Copper Tubing Use Plastic Tubing Refrigerator • • ¼” copper tubing ¼” plastic tubing • ¼” compression nut (1pc) → Molded end(Bulb) Plastic Tubing • • Ferrule (2pc) ¼” compression nut (1pc) (Assembled) Compression Nut (1/4”) (Assembled) Compress
ページ20に含まれる内容の要旨
Setting up your French Door Refrigerator Cover fi lter. 4. Remove the fi lter cap ( 4 ) and insert the fi lter into the 4 fi lter housing. 5. Slowly turn the water fi lter 90º clockwise to align with the printing mark on the cover, locking the fi lter in position. Make sure to align the water fi lter label mark 5 ( 5 ) with center of cover fi lter printing as illustrated. Remember, do not over-tighten. Turn until the label is aligned. Separation of fi lter cap(red) Removing any residual m
