ページ1に含まれる内容の要旨
VL#l 01
Home Appliances
4a
UseAndCare
A Note To You 2
Important Safety
3
Instructions
Parts And Features 4
Before Using Your
5
Refrigerator
Using Your
7
Refrigerator
Caring For Your
23
Refrigerator
I
Food Storage Guide 26
NO-FROST REFRIGERATOR-FREEZERS
“‘h-i
W’TH T=m&!IgR’
B
MODELS 3VED29DQ 3VED27DQ 3VED23DQ
ページ2に含まれる内容の要旨
A Note To You Thank you folr buying a Whirlpool* appliance. You have purchased a quality, world-class home appliance. Years of engineering experience went into its manufacturing. To ensure that you enjoy many years of trouble-free operation, we developed this tJse and Care Guide. It is full of valuable information on how to operate and maintain your appliance properly and safely. Please read it carefully. Also, please com- plete and mail the Ownership Registration Card provided with your a
ページ3に含まれる内容の要旨
Important Safety Instructions To reduce the risk of fire, electrical shock, or injury when using your refrigerator, follow these basic precautions: l Never clean refrigerator parts with l Read all instructions before using the refrigerator. flammable fluids. The fumes can create a fire hazard or explosion. l Child entrapment and suffocation are not problems of the past. Junked or l FOR YOUR SAFETY l abandoned refrigerators are still danger- DO NOT STORE OR USE GASOLINE OR ous even if
ページ4に含まれる内容の要旨
Parts And Features This section contains captioned illustrations. Use them to become familiar with where all parts and features are located and what they look like. Your refrigerator may have some or all of the features shown, and they may not look like the illustrations. This manual covers many models. Model and serial number label Automatic ice Light (on some models) (on side wall) maker with cubed and / -A. Utility crushed ice II Slide-out freezer basketst - Crisper light T
ページ5に含まれる内容の要旨
Before Using Your Refrigerator In This Section Page Page I Installing it properly .......................... .6 Cleaning it .......................................... .5 6 Plugging it in.. .................................... .5 Leveling it ............................................ I It is important to prepare your refrigerator for use. This section tells you how to clean it, connect it to a power source, install it and level it. Cleaning it Removing packaging materials NOTE: Do
ページ6に含まれる内容の要旨
Installing it properly 1. Allow 1.25 cm (I,$ inch) space on each side and at the tfop of the refrigerator for ease of installation. 2. If the refrigerator is to be against a wall, you might want IO leave extra space on the hinge side closest to the wall so the door can be opened wider. 3. The refrigerator can be flush against the wall. 4. Make sure ice maker water supply has been connected. Refer to Installation Instructions. Leveling it Your refrigerator has 2 front leveling scre
ページ7に含まれる内容の要旨
Using Your Refrigerator In This Section Page Page ............................ 8 Removing the snack bin .I4 Setting the controls ................. Adjusting the wine rack .14 Changing the control settings.. .9 .................. ........ Removing the door shelf fronts .9 Removing the freezer baskets.. ...... .I4 ....... Removing the freezer shelf.. .14 Removing the door trim ........... .................. .10 Using the THIRSTCRUSHER* Adjusting the door bins .................. .10
ページ8に含まれる内容の要旨
Setting the controls Controls for the refrigerator and freezer are in the refrigerator. When you plug in the refrigerator for the first time: 1. Set the Refrigerator Control to 3. Refrigerator Control adjustments range from 1 (warmest) to 5 (coldest). 2. Set the Freezer Control to B. Freezer Control adjustments range from A (warmest) to C (coldest). 3. Give the refrigerator time to cool down com- pletely before adding food. This may take several hours. The settings indicated above s
ページ9に含まれる内容の要旨
Changing the control settings l Adjust the Refrigerator Control first. If you need to adjust temperatures in refrigerator or freezer, use the settings listed l Wait at least 24 hours between adjustments. in the chart below as a guide. l Then adjust the Freezer Control if needed. _______ --.- .__._-- - - - - I_ RECOMMENDED CONDITION: REASON: CONTROL SElTINGS: __I---._--_.-- -.-- -- Refrigerator l Door opened often Refrigerator 4 section l Large amount of food added A Freezer too
ページ10に含まれる内容の要旨
Removing the door trim (dispenser area) (on some models) Remove the trim above the dispenser area for easier cleaning. To remove trim: 1. Remove all items from the shelf. 2. Pull straight up at each end of the trim. To replace trim: 1. Line up each end of the trim above the trim pocket opening in the door liner wall. 2. Push the trim straight down until it stops. 3. Replace items on the shelf. Adjusting the door bins To remove door bins: 1. Lift bin up. 2. Pull bin straight out.
ページ11に含まれる内容の要旨
-.- --.- Adjusting the door bin glides Use the bin/shelf glides to secure odd- shaped items or to separate other items. 1. Grasp glide. 2. Slide glide along bin/track. NOTE: Shelf glides cannot be removed. Adjusting the refrigerator shelves Adjust the shelves to match the way you use your refrigerator. Glass shelves are strong enough to hold bottles, milk and other heavy food items. To remove glass shelves: 1. Remove items from shelf. 2. Slide shelf out with an even, constant pull
ページ12に含まれる内容の要旨
Usiny the egg bin The egg bin has three pieces -the lid, the Lid / egg carrier, and the bin. Use the egg bin to hold one, two or three dozen eggs. To hold one dozen eggs: Place a dozen eggs into the egg carrier. Then place the egg carrier into the bin and cover with the lid. To hold two dozen eggs: Place two dozen eggs loose in the bin and cover them with the lid. Use the carrier to transport eggs between bin and your cooking area. To hold three dozen eggs: Place two dozen eggs l
ページ13に含まれる内容の要旨
Adjusting the crisper humidity co~ntrol You can control the amount of humidity in the moisture-sealed crisper. l The control can be adjusted to any setting between LOW and HIGH. l LOW (open) lets moist air out of the crisper for best storage of fruits and vegetables with skins. l HIGH (closed) keeps moist air in the crisper for best storage of fresh, leafy vegetables. Removing the meat drawer and cover Pull out to the stop, lift To remove the meat drawer: the front and pull again.
ページ14に含まれる内容の要旨
Remcsvimq the snack bin To remove the snkk bin: 1 Slide snack bin straight out to the stop with an even, constant motion. 2. Lift the front. Pull out to the 3. Slide bin out the rest of the way. stop, lift the front 4. Replace in reverse order. and pull again. Adjusting the wine rack Step 2 To remove the wze rack: 1. Lift front of wine rack. 2. Pull rack off rear support. 3. Replace in reverse order. Removing the freezer baskets Pull out to the stop, lift To remove a basket: t
ページ15に含まれる内容の要旨
Using the THIRSTCRUSHER’ dispensing system The ice dispenser Ice dispenses from the ice maker storage bin in the freezer. When you press the Personal Injury Hazard I dispenser bar, a trapdoor opens in a chute Tumbling ice and pressure can break a between the dispenser and the ice bin. Ice 1 fragile glass. Use a sturdy glass when moves from the bin and falls through the dispensing ice or water. chute. When you release the dispenser bar, Failure to do so could result in personal a bu
ページ16に含まれる内容の要旨
The water dispenser Chilled water comes from a tank behind the meat drawer. It holds approximately 1.5 L (1% quarts). When the refrigerator is first hooked up, press the water dispenser bar with a glass or jar until you draw and discard 1.9 to 2.8 L (2 or 3 quarts). The water you draw and discard rinses the tank and pipes. Allow several hours to chill a new tankful. NOTE: The small tray beneath the dispenser is designed to evaporate small spills. There is no drain in this tray. Do no
ページ17に含まれる内容の要旨
Using the automatic ice maker Here are a few things you will want to know upto stop ice about your automatic ice maker: maker. l The ON/OFF lever is a wire signal arm. DOWN to make ice automatically. r DOWN to UP to shut off the ice maker. start ice maker. NOTE: Do not turn ice maker on until it is connected to the water supply. Instruc- tions for ice maker water supply hook up are attached to the back of the refrigerator cabinet. l It is normal for ice crescents to be at- tache
ページ18に含まれる内容の要旨
Removing the ice maker storage bin Remove, empty and clean the storage bin if: l the ice dispenser has not, or will not, be used for a week or more. l a power failure causes ice in the bin to melt and freeze together. l the ice dispenser is not used regularly. To remove ice bin: 1. Pull the covering panel out from the bottom and slide it to the rear. 2. Lift the signal arm so it clicks into the OFF (up) position. Ice can still be dispensed, but no more can be made. 3. Lift the front
ページ19に含まれる内容の要旨
Solving common ice maker/dispe!nser problems - --- ---- -...-- PROBLEM CAUSE SOLUTIONS Ice dispenser l Freezer door open l Close the freezer door. won’t work l Make sure bin is pushed in all the way. l Ice bin not properly installed l Wrong ice in bin l Use only crescents from ice maker. Shake the bin occasionally to keep cubes separated and to increase storage room. l Dispenser not used for l Dump old ice and make a new supply. extended periods, causing ice cubes to melt togethe
ページ20に含まれる内容の要旨
Removing the base grille Condenser coils To remove the grille: 1. Open both doors. 2. Pull base grille forward to release the support tabs from the metal clips. 3. Do not remove Tech Sheet fastened behind the grille. -_-- To replace the grille: grille 1. Line up grille support tabs with metal clips. 2. Push firmly to snap into place. 3. Close the doors. See cleaning instructions for defrost pan and condenser coils on page 24. Changing the light bulbs Electrical Shock Hazard Be
