ページ1に含まれる内容の要旨
UD-39
KitchenAid and Maytag 25' SXS
Refrigerators
Models:
KSRJ25FXBL
KSRJ25FXMS
KSRJ25FXMT
MSD2559XEB
MSD2559XEM
MSD2559XEW
Home Appliances
Prepared by: WHIRLPOOL CONSUMER CARE
March 2010
PART NO. W10326038
ページ2に含まれる内容の要旨
FORWARD The following service update information is provided to make you more knowledgeable about KitchenAid and Maytag refrigerators. Service update information is designed for the experienced service specialist. It keeps you advised of the most recent improvements and product changes, and allows you to service these products more efficiently. WHIRLPOOL CORPORATION assumes no responsibility for any repairs made on our products by anyone other than authorized In-Home Service Professionals.
ページ3に含まれる内容の要旨
TABLE OF CONTENTS KITCHENAID AND MAYTAG 25’ SXS AKA ACCELERATOR ....................................... Page 1 Model Number Description ...................................................................................... Page 1 Dimensions .............................................................................................................. Page 1 Flush Dispenser with Stealth Software ........................................................................ Page 2 Us
ページ4に含まれる内容の要旨
KITCHENAID AND MAYTAG 25’ SXS REFRIGERATORS Model Number Description* KSRJ25FXBL 25’ SXS DISPENSING KSRJ25FXMS 25’ SXS DISPENSING KSRJ25FXMT 25’ SXS DISPENSING MSD2559XEB 25’ SXS DISPENSING MSD2559XEM 25’ SXS DISPENSING MSD2559XEW 25’ SXS DISPENSING Dimensions In. C Daip m ae cin tysions 2 Inches In 5..400 Carton Depth 36 1/4 Capacity 25.400 Carton Height 71 1/4 Carton Depth 36 1/4 C Ca arrtto on n W He id ig th ht 3 77 1 1 1//4 4 Cutout Depth (in) 28 7/8 Carton Width 37
ページ5に含まれる内容の要旨
Flush Dispenser with Stealth Software Flush Dispenser (AKA Victoria) with Stealth Software. User Interface Blue and Amber Although the Maytag icons are slightly different and the LED color is amber the controls function the same. *Always refer to Service Sheet and Use and Care Manual for information specific to the refrigerator you are servicing. 2
ページ6に含まれる内容の要旨
Attaching or Removing Handles KitchenAid handles are held onto mounting studs with Allen screws. Maytag handles snap off by lifting handle. The mounting studs screw into door skin. Maytag Handle Removal: Grasp handle with two hands and lift/jerk up. *Always refer to Service Sheet and Use and Care Manual for information specific to the refrigerator you are servicing. 3
ページ7に含まれる内容の要旨
Removing Freezer Door WARNING Electrical Shock Hazard Disconnect power before servicing. Replace all parts and panels before operating. Failure to do so can result in death or electrical shock. 1. Unplug refrigerator or disconnect from power.” 2. Disconnect wiring harnesses and water line. *Always refer to Service Sheet and Use and Care Manual for information specific to the refrigerator you are servicing. 4
ページ8に含まれる内容の要旨
Removing Freezer Door (continued) 5. Disconnect harnesses. 3. Remove screw and mounting bracket. 4. Disconnect water tube. 6. Straighten and lay out the har- nesses to pull through the hinge. 7. Lift off the freezer door while guiding the water tube and wire harness through the hinge. NOTE: Only the harness that is mated with the water tube is routed through the bottom door hinge. *Always refer to Service Sheet and Use and Care Manual for information specific to the refrigerator you are ser
ページ9に含まれる内容の要旨
Connecting Water Line WARNING Electrical Shock Hazard Disconnect power before servicing. Replace all parts and panels before operating. Failure to do so can result in death or electrical shock. 1. Unplug refrigerator or discon- nect power. 2. Remove and discard the cap from the gray water tube. 3. Using a compression nut and sleeve, attach the copper tube to the water inlet. 4. Once secured, tighten the compression nut. Do not over tighten. 5. Check the connection by pull ing
ページ10に含まれる内容の要旨
Machine Compartment WARNING Electrical Shock Hazard Disconnect power before servicing. Replace all parts and panels before operating. Failure to do so can result in death or electrical shock. 1. Unplug refrigerator or disconnect power. Component and refrigeration tubing identification. 2. Plug on start module. *Always refer to Service Sheet and Use and Care Manual for information specific to the refrigerator you are servicing. 7
ページ11に含まれる内容の要旨
Freezer Compartment -FC Accelerator has a new small cube icemaker and a special water valve with a 65cc flow rate. New Ice Bin Release The ice bin incorporates a new release. The new design includes a double latch system for a better engagement. *Always refer to Service Sheet and Use and Care Manual for information specific to the refrigerator you are servicing. 8
ページ12に含まれる内容の要旨
Auger Motor Coupling Auger motor coupling lifts off motor. *Always refer to Service Sheet and Use and Care Manual for information specific to the refrigerator you are servicing. 9
ページ13に含まれる内容の要旨
Removing Auger Motor WARNING Electrical Shock Hazard Disconnect power before servicing. Replace all parts and panels before operating. Failure to do so can result in death or electrical shock. 1. Unplug refrigerator or disconnect power. 2. 3. Harness is only long enough to allow the motor to be lifted high enough to disconnect. When installing make sure the harness connection is tight. *Always refer to Service Sheet and Use and Care Manual for information specific to the refrigerator you are se
ページ14に含まれる内容の要旨
Flush Mount Dispenser “Victoria” The new flush design dispenser will migrate across the refrigeration line in 2010. *Always refer to Service Sheet and Use and Care Manual for information specific to the refrigerator you are servicing. 11
ページ15に含まれる内容の要旨
Flush Mount Dispenser (continued) Removing User Interface WARNING Electrical Shock Hazard Disconnect power before servicing. Replace all parts and panels before operating. Failure to do so can result in death or electrical shock. 1. Unplug refrigerator or disconnect power. 2. h 3. 4. *Always refer to Service Sheet and Use and Care Manual for information specific to the refrigerator you are servicing. 12
ページ16に含まれる内容の要旨
Flush Mount Dispenser (continued) 5. 6. Removing Dispenser Assembly The false wall should be slid upward to help disengage the tabs on the left and right sides. 7. 8. *Always refer to Service Sheet and Use and Care Manual for information specific to the refrigerator you are servicing. 13
ページ17に含まれる内容の要旨
Flush Mount Dispenser (continued) Removing Dispenser Switches 9. 10. 11. *Always refer to Service Sheet and Use and Care Manual for information specific to the refrigerator you are servicing. 14
ページ18に含まれる内容の要旨
Control Assembly WARNING DANGER WARNING DANGER Electrical Shock Hazard Electrical Shock Hazard Disconnect power before servicing. Only authorized technicians should perform diagnostic voltage measurements. Replace all parts and panels before operating. After performing voltage measurements, Failure to do so can result in death or disconnect power before servicing. electrical shock. Failure to follow these instructions can result in death or electrical shock. Voltag V e Measurement Saf oltage Mea
ページ19に含まれる内容の要旨
Control Assembly (continued) Control and Power Supply Boards Power Supply Board *Always refer to Service Sheet and Use and Care Manual for information specific to the refrigerator you are servicing. 16
ページ20に含まれる内容の要旨
Control Assembly (continued) Control Board Connector Identification Control Board Input and Output Voltages/Signals *Always refer to Service Sheet and Use and Care Manual for information specific to the refrigerator you are servicing. 17
