ページ1に含まれる内容の要旨
CD DIGITAL TUNER
with REMOTE CONTROL
OWNER'S MANUAL
SMV122
Visit our web site at www.emersonscott.com
SMV122_ib_060402.p65 31 4/6/2002, 17:43
ページ2に含まれる内容の要旨
WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PRESENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. W ARNING RISK OF ELECTRIC SHOCK DO NOT OPEN ! The lightning flash with arrow- The exclamation point within CAUTION: TO REDUCE THE head symbol, within an equi- an equilateral triangle is in- RISK OF ELECTRIC SHOCK lateral triangle is inte
ページ3に含まれる内容の要旨
Thank you… … … … … … for purchasing this H.H. SCOTT audio product. The H.H. SCOTT brand is your assurance of quality, performance and value. Our engineers have included many useful and convenient features in this product. Please be sure to read this Owner’ s Manual completely to make sure you are getting the maximum benefit from each feature. This product was manufactured using the highest quality components and standards of workmanship. It was tested by H.H. SCOTT inspectors and found to be in
ページ4に含まれる内容の要旨
IMPORTANT NOTES CLASS 1 LASER PRODUCT CAUTION CLASS 1 LASER PRODUCT INVISIBLE LASER RADIATION APPAREIL Á LASER DE CLASSE 1 WHEN OPEN AND INTERLOCKS DEFEATED. PRODUCTO LASER DE CLASE 1 AVOID EXPOSURE TO BEAM This product contains a low power Laser Device. • Avoid installing this unit in places • Operate controls and switches as exposed to direct sunlight or close to described in the manual. heat radiating appliances such as • Before turning on the power, make electric heaters, on top of other ste
ページ5に含まれる内容の要旨
PREPARATION FOR USE Unpacking And Set Up • Remove the unit from the carton, and remove all packing materials from the unit. • Save the carton and packing materials in case the unit ever needs to be returned for service. Using the original carton and packing materials is the only way to safely repack the unit for shipment. • Remove any descriptive labels or stickers from the top or front of the unit. Do not remove any labels from the back or bottom of the cabinet. • Remove any small strip
ページ6に含まれる内容の要旨
SET UP PROCEDURES STEP 1 STEP 2 STEP 3 STEP 4 5 SMV122_ib_060402.p65 5 4/6/2002, 17:42
ページ7に含まれる内容の要旨
LOCATION OF CONTROLS AND INDICATORS FRONT VIEW 12 11 11 10 13 9 14 8 7 15 16 6 5 17 4 3 18 2 19 1 20 21 BACK VIEW 1 23 24 3 22 25 26 6 SMV122_ib_060402.p65 6 4/6/2002, 17:42
ページ8に含まれる内容の要旨
1.) POWER/STANDBY Button. 2.) TUN/ SKIP UP Button. 3.) TUN/ SKIP DN Button. 4.) CD PLAY / PAUSE Button. 5.) RANDOM Button. 6.) CD Button. 7.) TUNER Button. 8.) BAND Button. 9.) STANDBY LED Indicator. 10.) MUTE LED Indicator. 11.) Speakers. 12.) CD Door. 13.) Multi-Function LCD Display. 14.) REMOTE SENSOR. 15.) VOL DN Bntton. 16.) VOL UP Button. 17.) PRESET EQ Button. 18.) MEMORY-UP / REPEAT Button. 19.) CD STOP Button. 20.) MEMORY / C-ADJ Button. 21.) CD Door OPEN / CLOSE
ページ9に含まれる内容の要旨
REMOTE CONTROL 10 1.) TIMER Button. 2.) SLEEP Button. 3.) TUNER Button. 11 9 4.) BAND Button. 12 5.) TUNING Up / 13 CD Skip Search Forward Button. 14 8 15 6.) TUNING Down / 7 16 6 CD Skip Search Reverse Button. 17 5 18 4 7.) INTRO Button. 3 19 8.) MEMORY / C-ADJ Button. 2 9.) MUTE Button. 1 20 10.) Infra Red Signal Transmit LED. 11.) POWER On/Off Button. 12.) Number Key Pads. 13.) REMAIN / MODE Button. 14.) RANDOM Button. 15.) REPEAT / MEM-UP Button. 16.) CD PLAY / PAUSE But
ページ10に含まれる内容の要旨
BATTERY INSTALLATION Insert 2 ‘ AAA’ size alkaline batteries, not included, into the battery compartment of the remote handset, observing the battery polarity and replace the cover. BATTERY REPLACEMENT When the batteries become too weak, the operating distance of the remote handset is greatly reduced and you will need to replace the batteries. NOTES: • To maintain the accuracy and long life of the transmitter, do not press two or more buttons simultaneously. • If the remote control is
ページ11に含まれる内容の要旨
OPERATING INSTRUCTIONS CONNECTION TO ACTIVE SUBWOOFER To enhance high bass, connect the RCA SUB WOOFER jack located at back of unit to your active subwoofer. CONNECTION TO EXTERNAL AMPLIFIER You have a possibility to connect to external Amplifier through RCA LINE OUT jacks located at back of unit. SETTING THE CLOCK Clock can be set while clock time is displayed, at STANDBY mode or CD, TUNER modes. During CD, or TUNER operations, press REMAIN/MODE button until clock is displayed, and follow the p
ページ12に含まれる内容の要旨
LISTENING TO RADIO 1.) Press the POWER/STANDBY button to turn the unit ‘ On’ . 2.) Select the Tuner function by pressing TUNER button. TUN/ TUN/ SK UP SK DN 3.) Select AM or FM band by pressing BAND button. Tune to the desired station by pressing or button. 4.) Adjust the VOLUME to the desired level using the VOLUME UP or DOWN button. 5.) After finished listening, press the POWER/STANDBY button to turn power ‘ Off’ . Manual Tuning Press the or buttons as many times as required until the freq
ページ13に含まれる内容の要旨
4.) Press the MEMORY button. The memory indicator will flash in the display. MEMORY MEMORY CH FM MHz 5.) Press the MEMORY-UP button to select any one of the 20 available preset station memories. MEMORY-UP/ REPEAT CH FM MHz 6.) Press the MEMORY button again to enter the selected radio station into the selected memory location. 7.) Repeat the above steps 2 – 6 to enter all your desired stations into the preset station memories. TUNING TO PRESET STATIONS After you have entered up to 40 (20 AM, 20 F
ページ14に含まれる内容の要旨
PLAYING COMPACT DISCS LOADING AND UNLOADING COMPACT DISCS POWER 1.) Press the POWER button to turn the unit ‘ On’ . CD 2.) Select the CD function by pressing the CD button. 3.) Press the the CD Door OPEN/CLOSE button to open the CD compartment. NOTE: The CD door is motorized and will open slowly. Do not touch the CD Door. OPEN/CLOSE 4.) When the disc compartment has opened, insert the disc with the label side facing out. Push down in the center until disc is locked in place. 5.) Close the disc
ページ15に含まれる内容の要旨
CAUTION • Do not put anything except a compact disc into the compartment. • Foreign objects can damage the mechanism. • Keep the disc compartment closed when not in use to prevent dirt and dust from entering the mechanism. • Never place more than one disc into the disc compartment at any time. • If the disc is correctly loaded, the total number of tracks on the disc will be displayed. NOTES: After the disc compartment is fully closed, the disc information may not appear on the display.
ページ16に含まれる内容の要旨
NOTES: • If the disc is deeply scratched, or too dirty, disc play may not start. • If the disc is inserted incorrectly, or the disc is damaged the “no disc” indicator will flash on display. POP DISC ERRORS • This compact disc player has built-in error compensation circuits to correct for minor defects in a disc. There are limits, however, to the amount of correction available. • In some cases, the CD player may skip some tracks, or parts of tracks, on a disc during disc play. This proble
ページ17に含まれる内容の要旨
TRACK SKIP Starting disc play from the beginning of a particular track Press the or Skip Track buttons to select the desired track. The number of the selected track will be shown on the CD display. PLAY/ PAUSE Press the PLAY/PAUSE button to start play. To skip to the next track For example, to skip ahead to the beginning of track 5 while track 4 is playing. 1.) Press the Skip track button once. Disc play will resume at the beginning of track 5. 2.) The CD player will skip ahead to the next t
ページ18に含まれる内容の要旨
TRACK SEARCH You can search through the track by holding the or track skip button down. Normal play will resume when the button is released. REPEAT DISC PLAY Use the REPEAT button to play an entire disc or one track continuously. Repeat The Whole Disc 1.) Press the REPEAT/MEMORY-UP button once. The “REPEAT” indicator appears in the display. MEMORY-UP/ 1234 5678 REPEAT 9 10> PLAY/ PAUSE 2.) Press the PLAY/PAUSE button. 3.) The disc will then begin playing through to the end of the last track.
ページ19に含まれる内容の要旨
4.) The selected track will then begin playing through to its end. At which STOP point it will automatically return to the beginning of that track. This will continue until the STOP button is pressed. 5.) If the REPEAT / MEMORY UP button is pressed once more, the “REPEAT” indicator will disappear and, repeat play will end. Normal disc play will resume from that point. 6.) When the last track has finished playing, the CD player will then Stop. PROGRAMMED DISC PLAY • It is possible to program t
ページ20に含まれる内容の要旨
5.) Press the MEMORY button. Continue entering tracks in this way until all the desired tracks are stored (up to 20 tracks). NOTES: • If the PLAY/PAUSE button is pressed before the MEMORY button is pressed to store a track, the track will not be programmed, and the disc will start playing from the first selected track. • Any track can be programmed to play more than once. • Repeatedly pressing the MEMORY button will enable you to check the program if required. LISTENING TO PROGRAMMED TRA
