ページ1に含まれる内容の要旨
Integrated
Video Recorder
P P V V R R
DigiCorder HD S2X
Digital Twin HD-Receiver
with
integrated Hard drive
Operating manual
With two PCMCIA slots for use
with CI modules.
For receiving free-to-air and encrypted
(e.g. VIACCESS, CONAX, IRDETO, SECA etc.)
HD satellite Programmes.
DiSEqC 1.2
ページ2に含まれる内容の要旨
1 1 Contents 1 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 2 Illustrations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 3 Please read this first . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Disposal advice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Safety notes . . .
ページ3に含まれる内容の要旨
6.6.7 Network settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 7 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 7.1 Switching on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 7.2 Programme selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
ページ4に含まれる内容の要旨
1 8.1.2.5 How to programme new event timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 8.1.3 Timeshift function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 8.1.3 Timeshift-Funktion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 8.1.4 Setting markers while recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 8
ページ5に含まれる内容の要旨
2 Illustrations On/Standby Remote control Option* Sound on/off in TV mode: select sound/subtitles, special functions in radio mode: stations by switching the sound Numeric keys sub-carriers 0/AV red rewind greenPVR Navigator, Record Stop yellowPause, Multifunctional keys playback blue fast forward Up arrow key OK Programme + Programme list on/off Left arrow key Right arrow key Volume - Volume + Down arrow key Back Volume - Info EPG Volume + Programm + Volume - Programme - Menu on/off TV/radio mo
ページ6に含まれる内容の要旨
2 Front of unit On/ Alphanumeric CI module Eject buttons for CI module Arrow keys Standby display slot 2 slot 1 CI modules USB socket Back Play/Pause OK-key Mode Card-reader: > Insert the CONAX-Smartcard (golden chip facing downwards and in the direction of insertion) until the point of contact in the card-reader. Inserting the CI modules: > Follow the instructions provided by the manufacturers of the CI module and card. > Insert the desired Smartcard into the appropriate CI module. > Now carefu
ページ7に含まれる内容の要旨
9.2.4 EPG channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69 9.2.5 Selecting a TV channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69 9.2.6 Selecting radio channels/programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70 9.3 Parental control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ8に含まれる内容の要旨
3 Dear customer, congratulations on your decision to purchase the DigiCorder HD S2X digital receiver. The operating manual supplied is intended to help you utilise the comprehensive functions of your new digital receiver to the fullest extent. We have kept the operating instructions as brief as possible, and have used terminology that everybody can understand. The range of functions of your receiver is constantly being expanded in the form of software updates. This means that additional steps in
ページ9に含まれる内容の要旨
3 Please read this first > Before starting to use your receiver, please check that all the components have been supplied correctly. The following should be included:1 digital receiver, 1 mains cable, 1 remote control, 1 operating manual, 1 guarantee card, 2 batteries (1.5V microcells). > Please insert the batteries supplied into the battery compartment of the remote control unit, with attention to the correct polarity as indicated. Disposal advice The packaging material of your receiver consists
ページ10に含まれる内容の要旨
3 Safety notes For your own protection, please read through the safety precautions carefully before proceeding to operate your new unit. The manufacturer will accept no liability for injuries or damage caused by inappropriate handling or non-compliance with the safety precautions. - The appliance has a fully integrated hard drive. There is no provision for this drive to be exchanged other than by an authorised TechniSat retailer/technician. Any unauthorised replacement of the hard drive will mea
ページ11に含まれる内容の要旨
In the following cases you should disconnect the receiver from the mains power, and should consult an expert: > the mains cable or the mains plug are damaged > the receiver was exposed to liquid, or liquid has run into the unit > in case of severe malfunctions > in case of significant external damage When not in use During a storm or when not in use for a long period (e.g. holiday), the unit should be disconnected from the mains and the antenna cable should be removed. Before disconnecting the u
ページ12に含まれる内容の要旨
4 4 Connecting the DVB receiver a. Mains connection b. Connection between the LNB 1 and the LNB input 1 of the DVB receiver. (Please note: when operating the unit with one antenna signal, the LNB must be connected to the LNB input 1.) c. Connection between the LNB 2 and the LNB input 2 of the DVB receiver. d. HDMI connection of the DVB receiver with the TV set. e. Scart connection between the DVB receiver and television set. f. Scart connection between the video recorder and the VCR scart socket
ページ13に含まれる内容の要旨
The references a b c etc. mentioned below relate to the illustration on page 12. 4.1 Mains power connection The digital receiver should only be connected to the mains power supply when all the cable connections with other components of the system have been made. This helps to avoid damage to the digital receiver as well as to other components. a When you have made all the other connections, use the mains cable supplied to connect the receiver to a mains power outlet 230 V/50-60 Hz. 4.2 External
ページ14に含まれる内容の要旨
4 4.4 Video cassette recorder (VCR) f Connect the video recorder to the SCART socket VCR. During playback, the video recorder will provide a switching signal to the digital receiver. This will allow the video recorder signal to be routed automatically to the TV set. If your video recorder does not supply a switching current, use the 0/AV key to switch your digital receiver to the external input AV. Press this key again to return to normal operation. 4.5 HiFi/Surround Sound amplifier To achieve t
ページ15に含まれる内容の要旨
5 Initial installation After you have read the safety notes and connected the unit as described in Chapter 4, switch the unit on as described in Chapter 7. When switching on the receiver for the first time, the starting window of the installation assistant AutoInstall will be displayed. The installation assistant allows you to make the most important settings of your digital receiver in the simplest way possible. At each step of the installation there will be an explanation as to which settings
ページ16に含まれる内容の要旨
5 > Use the green function key Accept to confirm and accept the selection, and to go to the antenna configuration Antenna configuration This step of the installation allows you to adjust the setting of your digital receiver to the configuration of your antenna. > If you wish to accept the standard antenna configuration, press the green function key Accept. In this case proceed with the point “Software update”. > If the configuration of your reception installation does not conform to the standard
ページ17に含まれる内容の要旨
All the satellites included in your antenna configuration will be scanned for Programmes. This procedure may take a few minutes. Please note any messages displayed on screen. Loading EPGplus data Your digital receiver has an Electronic Programme Guide, EPGplus Electronic Programme Guide. Your receiver must first download the EPGplus data from the satellite in order for the Electronic Programme Guide data to be displayed. Your receiver will start loading the EPGplus data automatically for this pu
ページ18に含まれる内容の要旨
6 6 Settings Now that you have connected your new digital receiver, and commenced operating it, you can, if you wish, proceed to optimise its functions for your preferences. 6.1 Operating language This menu item gives you the opportunity of setting the language used in all the menus according to your preference. > Use the Menu key to call up the Main menu. > Now use the up/down arrow keys to mark the menu line Operating language. > Confirm by pressing OK. The sub-menu Operating language will be
ページ19に含まれる内容の要旨
6.2.3 Date/hour In this menu point decide whether the hour and the date should be automatically read in from a determined programme after switching on. > By pressing the OK key another window will open. > In this window use the up/down arrow keys to select either the entry Automatic or select the programme from which the hour and the date should be read in and confirm the selection with OK. 6.2.4 Standby clock In this line you can decide whether the current time is to be shown in the display whi
ページ20に含まれる内容の要旨
6 > Now, using the up/down arrow keys, mark the line Picture Settings. > Confirm by pressing OK. The Menu Picture settings will appear. > Use the arrow keys up/down to move the marker within the menu and to change the individual positions as indicated. When selecting a menu item, please also note any messages displayed on screen. The following settings/adjustments can be made: 6.3.1 Picture format > Use the arrow keys left/right to set the picture format of your TV set appropriately, to 4:3 or 1
