ページ1に含まれる内容の要旨
Ceramic
Tower Heater Instruction Booklet
KCE540
KCE540_IB_FA.indd 1 12/10/09 9:29 AM
ページ2に含まれる内容の要旨
Important Please retain your instruction book for future use. In the event that you need some assistance with your Kambrook appliance, please contact our Customer Service Department on 1300 139 798 (Australia) or 09 271 3980 (New Zealand). Alternatively, visit us on our website at www.kambrook.com.au KCE540_IB_FA.indd 2 12/10/09 9:29 AM
ページ3に含まれる内容の要旨
Contents Kambrook Recommends p4 Safety First Your Ceramic Tower Heater p6 Quick Start Guide p7 Using Your Ceramic Tower Heater p8 Care and Cleaning p11 Warranty Details p12 KCE540_IB_FA.indd 3 12/10/09 9:29 AM
ページ4に含まれる内容の要旨
Kambrook Recommends Safety First IMPORTANT: Please retain your instruction book for future use. At Kambrook, we believe that safe performance is the first priority in any consumer product, so that you, our valued customer can confidently use and trust our products. We ask that any electrical appliance that you use be operated in a sensible fashion with due care and attention placed on the following important operating instructions. Important Safeguards For Your Kambrook Ceramic Tower Hea
ページ5に含まれる内容の要旨
• Do not allow materials that have been • Switch off at the control switch and in contact with oil, petroleum based power outlet, then unplug and allow products or drying fluids to come in heater to cool down before cleaning or contact with the heater. storing. • Do not run the cord under carpeting or • Use this heater only as described in this cover the cord with rugs, runners or the instruction manual. Any other use not like. Arrange cord away from traffic areas recommended by the ma
ページ6に含まれる内容の要旨
Your Ceramic Tower Heater 1. 1800 watt ceramic heating Control Panel element 6. Convenient 8hr auto-off timer 2. LCD screen 7. 2 heat setting, plus auto mode 3. ThermoGuard protection for and fan only setting peace of mind 8. Power/Swing button to turn the 4. Full featured remote control heater on and off, and activate the 90° degree oscillation for 5. Ceramic heating elements for warmth throughout the room efficient heating 9. Variable temperature buttons Not Shown to maintain your desi
ページ7に含まれる内容の要旨
Quick Start Guide Setting the Turning the heating heater on mode Plug the cord Press the ON/ Press the The heater will Press the MODE into a 230V or OFF switch to POWER/SWING start operating button to 240V power switch on. button to at the LOW heat select the HIGH point and activate. setting. heat setting, switch on. and retain a comfortable temperature for your room. Setting the Setting the Turning the variable oscillation heater off temperature Press the Press the Press and hold P
ページ8に含まれる内容の要旨
Using Your Ceramic Tower Heater To activate the heater, press the Before First Use POWER/SWING button. The heater Remove any promotional material or will start operating on the LOW heat packaging from the heater. setting (1100 watts) and the LCD Unwind the cord to its full length screen will illuminate, displaying the and place the heater on a firm, level ambient room temperature and heat surface in a stable upright position. setting. Visually inspect the air inlet and outlets to ensu
ページ9に含まれる内容の要旨
When the air temperature drops Setting the Variable below the set temperature the unit will begin heating again. Temperature The variable temperature setting can Setting the Oscillation be used to maintain your desired temperature. The oscillation function works in all operating modes. Press the POWER/SWING button NOTE: The variable once to activate. The heater will begin temperature setting only to oscillate from side to side. operates when the heater is Press the POWER/SWING button
ページ10に含まれる内容の要旨
Using Your Ceramic Tower Heater continued ThermoGuard Overheating Safety Device Your heater is fitted with a safety device that switches off the heater in the event of overheating. Should this heater stop working, turn off the heater and inspect the air inlet and outlet for blockages. Wait for the heater to cool for the protection system to reset before attempting to restart the heater. 10 KCE540_IB_FA.indd 10 12/10/09 9:29 AM
ページ11に含まれる内容の要旨
Care and Cleaning Ensure that the heater is switched off and disconnected from the power point before cleaning. Use a clean, dry cloth to clean the external surfaces of the heater. If the heater has collected dust or dirt inside the unit or around the elements, have the unit cleaned by a qualified service agent. Do not operate the heater in this condition. Do not attempt to open the case of the heater at any time as there are no customer serviceable parts inside. When not in use, store
ページ12に含まれる内容の要旨
Kambrook 12 Month Replacement Warranty In Australia, this Kambrook Replacement Warranty The Kambrook Replacement Warranty does not does not affect the mandatory statutory rights apply to any defect, deterioration, loss, injury or implied under the Trade Practices Act 1974 damage occasioned by, or as a result of, misuse and other similar State and Territory legislation or abuse, negligent handling or if the product has relating to the appliance. It applies in addition been used other than in
