ページ1に含まれる内容の要旨
Electric Instantaneous Water Heaters
®
The KwickShot Electric Instantaneous Water Heaters
Models Feature:
■ On Demand Hot Water—No delay.
■ Reduced Energy Waste—Flow switch activates heater only
on demand (no stand-by heat loss). 99% efficient.
■ Continuous Hot Water—No storage capacity to run out.
■ No Need for a T&P Relief Valve—Check local codes.
■ Integral Flow Restrictor—Built-in to ensure proper
temperature rise.
■ Prevention Of Bacteria Growth.
■ Easy Installation—Mounts on wall – no s
ページ2に含まれる内容の要旨
Electric Instantaneous Water Heaters Single Point (Single Phase) Intregal 0.5 GPM flow control and faucet aerator provided. Model kW Temperature Recommended Voltage AMPS Note: Designed to comply with 0.5GPM handwashing code target outlet Number Rating Rise °F Wire Size temperature 105°F - 110°F. Please consult local codes for electrical 0.5 GPM requirements. Additional voltages and wattages are available. For more ES-3000-1-S-10 3.0 120 25.0 41 10 AWG information please consult factory. ES-3500
ページ3に含まれる内容の要旨
Electric Instantaneous Water Heaters Turn on 0.5 GPM (up to 6.5kW) Turn on 0.7 GPM (7.5 kW and up) Flow Controlled (Single Phase) Max Flow 2.0 GPM Model kW Temperature Rise °F Recommended Voltage AMPS Please consult local codes for electrical requirements. Additional Number Rating Wire Size 0.5 0.75 1.0 1.5 2.0 voltages and wattages are available. For more information please GPM GPM GPM GPM GPM consult factory. EFC-5500-4-S-10 5.5 240 23.0 75 50 38 25 18 10 AWG Refer to Voltage Identification Co
ページ4に含まれる内容の要旨
Electric Instantaneous Water Heaters Min Flow 0.7 GPM Series Three (Single Phase) Max Flow 4.0 GPM Please consult local codes for electrical requirements. Model kW Voltage Current Temperature Rise °F Recommended Number Rating Per Wire Size 1.5 2.0 2.5 3.0 4.0 Additional voltages and wattages are available. For Phase GPM GPM GPM GPM GPM more information please consult factory. EFT-28000-4-T-10 28.0 240 120 (3x40 Amps) — — — 65 50 8 AWG Refer to Voltage Identification Code Chart The unit must have
ページ5に含まれる内容の要旨
Electric Instantaneous Water Heaters Min Flow 0.7 GPM Thermostatic Triple Module Models (Three Phase) Max Flow 4.0 GPM Model kW Voltage AMPS Temperature Rise °F Recommended Please consult local codes for electrical requirements. Number Rating Wire Size 1.5 2.0 2.5 3.0 3.5 4.0 Additional voltages and wattages are available. For more GPM GPM GPM GPM GPM GPM information please consult factory. EFT-18000-2-T-10 18.0 208y/120v 50.0 82 61 49 41 35 32 10AWG EFT-24000-2-T-10 24.0 208y/120v 67.0 — 82 65
ページ6に含まれる内容の要旨
Electric Instantaneous Water Heaters Suggested Specification: Instantaneous Water Heater shall be a Bradford White Model __________ with __________kW, _________vac ______________ to heat ________GPM @ a temperature rise of __________ degrees F. Unit shall have ABS UL 94 Vo rated cover. Heater body and element shall be glass reinforced UDEL.† Element shall be replaceable cartridge insert. Unit shall have a replaceable filter in the inlet connector. Element shall be iron free, nickel-chrome mater