ページ1に含まれる内容の要旨
Reference Guide
for the
QCP™ 3035 Phone
10300 CAMPUS POINT DRIVE
SAN DIEGO, CALIFORNIA 92121 U.S.A.
Visit us at www.kyocera-wireless.com
To purchase accessories, visit www.kyocera-wireless.com/store
80-B6863-1EN, Rev. -
ページ2に含まれる内容の要旨
TM This manual is based on the production version of the QCP 3035 phone. Software changes may have occurred after this printing. Kyocera reserves the right to make changes in technical and product specifications without prior notice. The products and equipment described in this documentation are manufactured under license from QUALCOMM Incorporated under one or more of the following U.S. Patents: 4,901,307 5,056,109 5,099,204 5,101,501 5,103,459 5,107,225 5,109,390 5,193,094 5,228,054 5,257,
ページ3に含まれる内容の要旨
phone models, depending upon available accessories and FCC requirements). SAR value shown is worst case value for a QCP 3035. A typical QCP 3035 is 1.26 at the ear and 0.61 when worn on the body. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF
ページ4に含まれる内容の要旨
Contents Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Installing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Power Save Mode. . . . . . . . . . . . . . . . . . . . . . . . .
ページ5に含まれる内容の要旨
Using normal text entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Using rapid text entry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Entering symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Entering numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ6に含まれる内容の要旨
Message delivery options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Adding a callback number to a message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Sending a message at a scheduled time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Erasing messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ7に含まれる内容の要旨
Chapter 1 Battery This chapter covers the basic functions of your QCP™ 3035 phone. In this chapter Installing the Battery page 2 Charging the Battery page 2 Battery 1
ページ8に含まれる内容の要旨
7 prs 8 tuv 0 9 wxyz # Installing the Battery Installing the Battery Before using your QCP 3035 phone, follow the steps below to install the battery. 1. Align the battery door to the groove on the bottom of the phone. Ensure that the battery slips into the small groove located in the middle of the phone casing. 2. Push the battery in until it clicks closed. The battery should be snug. Check and repeat if battery door is not aligned. Do not force. Charging the Battery Before using your phone, fu
ページ9に含まれる内容の要旨
Charging the Battery Power Save Mode Your phone switches to Power Save Mode after several unsuccessful attempts to locate a signal. When the phone is in Power Save Mode, you cannot make or receive calls, and the following screen appears. -POWER SAVE- No service available. Press any key to exit. Press any key to exit. Battery guidelines Do not disassemble, puncture, or short-circuit the battery. If you have not used the battery for more than a month, recharge it before using your phone.
ページ10に含まれる内容の要旨
Chapter 2 Getting Started This chapter covers the basic functions of your QCP 3035 phone. In this chapter Getting Started page 5 Getting to Know Your Phone page 6 Screen Icons page 7 Menus page 8 Basic Functions page 9 4 Reference Guide for the QCP 3035 Phone
ページ11に含まれる内容の要旨
Getting Started Getting Started 1. Press the End/Power key to turn the phone on or off, end a call, or return to the home screen. 2. Press the Send/Talk key to start or answer a call. 3. Press the center of the Navigator key to select Menu from the home screen, or to select a menu item or option from other screens. Getting Started 5
ページ12に含まれる内容の要旨
Getting to Know Your Phone Getting to Know Your Phone Jack for Hands-free headset (headset sold 1 7 separately). Home screen. Press to select Menu. 2 Send/Talk key starts or answers a call. 3 Speakerphone activates the speakerphone 4 1 Use the keypad to enter numbers, letters, or 5 symbols. Press and hold to call your voicemail number. 2 Shift key changes case in text entry. 6 Extend the antenna to make or answer a 7 call. Push in the antenna when the phone is not in use. 8 Navigation ke
ページ13に含まれる内容の要旨
Screen Icons Screen Icons The following icons may appear on your phone screen: The phone is operating in CDMA digital mode. The phone is receiving a signal. You can make and receive calls. The phone is not receiving a signal. You cannot make or receive calls. A call is in progress. The alarm clock is set. The phone ringer is silenced. The phone vibrates or lights up instead of ringing. The phone is outside of its home area. You have a text message, voice mail, or page. Enhanced CDMA voice pri
ページ14に含まれる内容の要旨
Menus Menus To view any of these menus from the home screen, press in to select Menu, then press right or left to select a menu option. Tools Web Browser Voice Memos Scheduler Contacts Alarm Clock View All Tip Calculator Add New Calculator Find Name Countdown Speed Dial List Stopwatch Voice Dial list Text Memos Business List Brick Attack Personal List Information Messages Voice Recent Calls Send New * Recent Calls Send Preformat * Settings Text In
ページ15に含まれる内容の要旨
Basic Functions Using menus From the home screen, press to select Menu, then press left or right, up or down to see menus. (To change the appearance of your menus, see “Display” on page 29). Press in to select a menu or menu item. Once you have selected a menu, press up or down to scroll through the menu items. Press to return to the top level of the current menu. Press to return to the home screen. In this guide, → tells you to select an option from a menu. For example, Menu
ページ16に含まれる内容の要旨
Basic Functions Silencing the ringer or alert To silence the ringer or stop the vibration alert during an incoming call, press . Press to answer the call. To silence all sounds for quiet environments, see “Silence All” on page 28. Tip Muting and unmuting a call You can turn mute on during a call so that you can hear everything your caller is saying, but they cannot hear you. To turn Mute on during a call, press to select Mute from the bottom of the screen. If you do not see Mute at
ページ17に含まれる内容の要旨
Basic Functions Locking the keypad To protect your phone from accidental keypresses when a call is not in progress, press and hold until the message appears: “Keypad guard is active. Press 123 to unlock.” For more keypad guard options, see “Turning keyguard on” on page 28. Unlocking the keypad Press → → in this order. Getting Started 11
ページ18に含まれる内容の要旨
Chapter 3 Calling Your QCP 3035 phone contains many calling features. In this chapter Speed dialing and 1-Touch Dialing page 13 Working with the Recent Calls list page 14 Entering pauses in numbers page 16 12 Reference Guide for the QCP 3035 Phone
ページ19に含まれる内容の要旨
Speed dialing and 1-Touch Dialing Speed dialing and 1-Touch Dialing Speed dialing and 1-Touch Dialing allow you to quickly dial stored phone numbers. Speed dialing To call a number from the home screen using speed dialing, enter the speed dialing location and press . Setting a speed dialing location A speed dialing location is the number or numbers that you enter to speed dial a phone number. 1. Open a saved contact card. (See “Opening a saved contact card” on page 19). 2. Press down to sel
ページ20に含まれる内容の要旨
Working with the Recent Calls list 1-Touch Dialing 1-Touch Dialing allows you to call a speed dialing number quickly without pressing . Enabling 1-Touch Dialing 1. Select Menu → Settings → Extras → 1-Touch Dialing → Enabled. 2.Press in. To call a number using 1-Touch Dialing, enter the speed dialing location and hold down the last number for approximately 1-1/2 seconds. For example, if the speed dialing number is 15, press , then press and hold . Redialing To redial the last number call
