ページ1に含まれる内容の要旨
fridge - fr eez er
USER MANUAL
ENN 26800
2223 445-12
ページ2に含まれる内容の要旨
IMPORTANT SAFETY INFORMATION It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of safety.You MUST read it care
ページ3に含まれる内容の要旨
Disposal of old Appliances The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detail
ページ4に含まれる内容の要旨
OPERATION Do not use soap or detergent as the smell may Before using linger. Dry thoroughly. Remove all securing tapes. Wash inside the appliance with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water). Control panel MODE A - Appliance button ON/OFF D - Temperature and function indicator E - Function button/ reset alarm B - Freezer thermostat knob F - Fridge thermostat knob C - Temperature indication button DISPLAY 1. If on, the indicated temperature is that of the 3.
ページ5に含まれる内容の要旨
Temperature indication Activation of functions In normal conditions, the display indicates the freezer Each time button E is pressed, the following functions temperature (symbol 2). are activated in a clockwise direction: Each time key C is pressed, the display indicates in Symbol 5 : fast freeze function sequence: Symbol 6 : shopping function 1. symbol 1 turns on and indicator 4 shows the No Symbol: Normal operation temperature of the fridge compartment; Not more than one function can be activ
ページ6に含まれる内容の要旨
wrap in polythene bags and place on the glass shelf Normal Operating Sounds above the salad drawers. You may hear faint gurgling or bubbling sounds Meat can only be stored safely in this way for when the refrigerant is pumped through the coils one or two days at the most. or tubing at the rear, to the cooling Fruit & vegetables: these should be thoroughly plate/evaporator. cleaned and placed in the salad drawers. When the compressor is on, the refrigerant is Butter & cheese: these should be
ページ7に含まれる内容の要旨
Frozen food storage Making ice cubes The appliance is provided with one or more trays for When you first start the freezer or if the freezer has ice-cubes trays. been out of use for some time, we advise you to run your appliance for at least 24 hours in the «fast Fill the tray(s) 3/4 full to give the ice space to expand freeze» mode before storing frozen food. and place them in the freezer compartment. Do not exceed the storage period indicated by the To release the ice cubes simply give the tra
ページ8に含まれる内容の要旨
Movable shelves The walls of the refrigerator have runners so that the shelves can be positioned as desired . For better use of space, the front half-shelves can lie over the rear ones. Positioning the door shelves To permit storage of food packages of various sizes, the door shelves can be adjusted in height.To make these adjustments proceed as follows: Gradually pull the shelf in the direction of the arrows until it comes off, then reposition as required. 8
ページ9に含まれる内容の要旨
HINTS AND TIPS Food which is to be frozen (when cool) should be Food Storage placed in the fridge before being transferred to To obtain the best results from your appliance, the freezer. neither hot foods nor liquids which may Thaw frozen food in the fridge. This will ensure evaporate, should be placed in the larder safer defrosting of foods and reduce the work of compartment. the refrigeration unit. Keep the time between buying chilled food and Try to avoid keeping the door open for l
ページ10に含まれる内容の要旨
MAINTENANCE AND CLEANING Before any maintenance or cleaning work is carried Changing the light bulb out, DISCONNECT the appliance from the ELECTRICITY supply. Should the interior light fail to work, first switch off the appliance and disconnect from the electricity Internal cleaning supply, then replace the bulb as follows; Clean the inside and accessories with warm water and bicarbonate of soda (5ml to 0.5 litre of water). Rinse and dry thoroughly. Important : Insert the 2 upper shelves in the
ページ11に含まれる内容の要旨
SOMETHING NOT WORKING Important: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation a charge will be made, even if the appliance is under guarantee. Before contacting your local Service Force Centre, check the following points: Symptom Solution No power to the appliance Check there is power at the socket. Check there is not a power cut by checking the household lights. Check the fuse has not blown. The light does not come on Ensure t
ページ12に含まれる内容の要旨
SERVICE AND SPARE PARTS In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Electrolux Service Force Centre by telephoning:- 0870 5 929929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area. For the address of your local Service Force Centre and further information about Service Force, please visit the website at www.serviceforce.co.uk Before calling out an engineer, please ens
ページ13に含まれる内容の要旨
GUARANTEE CONDITIONS Standard guarantee conditions We, Electrolux, undertake that if within 12 months of the date of the purchase this Electrolux appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: The appliance has been correctly installed and used only on the electricity supply stated on the rating plate. The appliance has
ページ14に含まれる内容の要旨
TECHNICAL SPECIFICATIONS POWER SUPPLY VOLTAGE AND FREQUENCY 220-240 V / 50 Hz TOTAL POWER ABSORBED 160 W AVERAGE DAILY UNITS ELECTRICITY * 0.918 kWh GROSS CAPACITY Fridge 164 l Freezer 162 l NET CAPACITY Fridge 91 l Freezer 78 l STAR RATING * This figure is based on standard test results in accordance with European Standard EN 153. Actual consumption will depend on how the appliance is used and where it is located. 14
ページ15に含まれる内容の要旨
INSTALLATION Important Warning It must be possible to disconnect the appliance from IF YOU ARE DISCARDING AN OLD APPLIANCE the mains power supply; the plug must therefore be THAT HAS A LOCK OR CATCH ON THE DOOR, easily accessible after installation. YOU MUST ENSURE THAT IT IS MADE UNUSABLE TO PREVENT YOUNG CHILDREN BEING TRAPPED INSIDE. Depending upon the position which you choose for your appliance, you may wish to reverse the way in which the door opens. To do this, refer to instructions on “D
ページ16に含まれる内容の要旨
The plug moulded onto the lead incorporates a fuse. For replacement, use a 13amp BSI362 fuse. Only Electrical connections ASTA or BSI approved fuses should be used. Any electrical work required to install this appliance The plug must not be used if the fuse cover/carrier is should be carried out by a qualified electrician or lost. The cover/carrier is indicated by the coloured competent person. insert at the base of the plug. WARNING:THIS APPLIANCE MUST BE A replacement cover/carrier must be obt
ページ17に含まれる内容の要旨
Instructions for totally built-in appliances Door reversal The appliance is supplied with the right or left door opening.To change the opening direction of the door proceed as in the following instructions before installing it. 1. Unscrew the upper pin and remove the spacer 2. Remove the upper door Z1 S 3. Unscrew the middle hinge and the brackets and refit them on the opposite side 4. Refit the upper door, the upper pin and the spacer on the opposite side 5. Unscrew the lower pin and remov
ページ18に含まれる内容の要旨
Fit the appliance in the niche by making sure that it stands against the interior surface of the unit on the opposite side where the door hinges of the appliances are fitted. Insert the appliance until the upper strip butts up against the unit (1) and make sure that the lower hinge is in line with the surface of the unit (2). Fasten the appliance with 4 screws provided in the kit included with the appliance. (I = short) (P = long) Apply the sealing strip pushing it between the refri
ページ19に含まれる内容の要旨
Place guide (Ha) on the inside part of the furniture door, up and down as shown in the figure and mark the position of external holes. After having drilled holes, fix the guide with the screws supplied. Fix cover (Hc) on guide (Ha) until it clips into place Open the appliance door and the furniture door at 90°. Insert the small square (Hb) into guide (Ha). Put together the appliance door and the furniture door and mark the holes as indicated
ページ20に含まれる内容の要旨
Fix cover (Hd) on guide (Hb) until it clips into place. Fix the appliance to the side of the kitchen unit, fit the bracket (E), adjust the distance , and fix using the screws (as in figure). Fit the cover (D). After completion of the door reversing operation, check that the door gasket adheres to the cabinet. If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket or accelerate th
