ページ1に含まれる内容の要旨
BENCH
GRINDER
STAND
BGSTAND
INSTRUCTION MANUAL
C o de: BGSTAND
Black Magenta
Cyan Yellow
D a t e: 061114 E dition: 09 Op: DCR
ページ2に含まれる内容の要旨
Contents Warranty Power Tools Warranty 2 Whilst every effort is made to ensure your complete Introduction 3 satisfaction with this tool, occasionally, due to the mass Environmental protection 3 manufacturing techniques, a tool may not live up to our required level of performance and you may need the Specifications 3 assistance of our service department. General safety rules 3 This product is warranted for a 2-year period for home domestic use from the date of the original purchase. Additio
ページ3に含まれる内容の要旨
Introduction General safety rules Your new GMC power tool will more than satisfy WARNING. Read all instructions. Failure to follow all your expectations. It has been manufactured under instructions listed below may result in electric shock, fire stringent GMC Quality Standards to meet superior and/or serious injury. The term “power tool” in all of the performance criteria. warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool. You
ページ4に含まれる内容の要旨
3. Personal safety c. Disconnect the plug from the power source before making any adjustments, changing accessories, or a. Stay alert, watch what you are doing and use storing power tools. Such preventive safety measures common sense when operating a power tool. Do reduce the risk of starting the power tool accidentally. not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of d. Store idle power tools out of the reach of children inatte
ページ5に含まれる内容の要旨
• If you are interrupted when operating the tool, complete Additional safety rules the process and switch off before looking up. for bench grinder stands • Periodically check that all nuts, bolts and other fixings are WARNING! DO NOT fit the bench grinder to the stand properly tightened. until the stand is bolted through or into the floor. This stand • Do not use a wheel that has received a blow, especially is not designed to be a free standing stand, and the base to the side of the
ページ6に含まれる内容の要旨
Unpacking Due to modern mass production techniques, it is unlikely that your GMC Power Tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury. Assembly The BGSTAND needs to be assembled prior to use, assembly will take approximately 20 minutes. Required Tools The following tools are required: • 5mm hex key (supplied) • 8mm hex
ページ7に含まれる内容の要旨
Components The BGSTAND is supplied with the following components: 1. Base 2. Fixed support pole 3. Adjustable support pole 8 3 4. Accessory storage compartment 5. Wheel storage compartments 6. Bench grinder support plate 7. Pan head tapping screws (x4) 8. Tension handle 9. Hook, pan head screw and flat washer 10. 8mm and 5mm hex keys 4 9 11. M10 x 50mm bolts with flat washers, spring washers and nuts (x4) 12. M6 x 40mm bolts with flat washers, spring washers and nuts (x4) 5 10 1 6 11 2 7 1
ページ8に含まれる内容の要旨
Know your product 6 Before using the tool, familiarize yourself with all the operating features and safety requirements. 9 Use the tool and accessories only for the applications intended. All other applications are expressly ruled out. 1. Base 3 2. Fixed support pole 3. Adjustable support pole 4. Accessory storage compartment 5 5. Wheel storage compartment (x2) 6. Bench grinder support plate 7. Pan head tapping screws (x4) 4 8. Tension handle 9. Hook 8 10. 8mm and 5mm hex keys 7 2 10 1 8
ページ9に含まれる内容の要旨
8. Fit the accessory storage Assembly compartment over the 1. Place the fixed support pole adjustable support pole and into the base. lower down onto the fixed support pole. 9. With the accessory storage compartment positioned at the top of the fixed support pole tighten the 2 hex bolts 2. Secure the fixed support pole to secure the compartment to the base by tightening the in position. 2 recessed hex screws in the 10. F it the wheel storage base, use the 5mm hex key to compa
ページ10に含まれる内容の要旨
13. Position the hook on the Cleaning front of the bench grinder 1. Re-lubricate all moving parts at regular intervals. support plate and secure 2. Never use caustic agents to clean plastic parts. using the pan head screw and flat washer. CAUTION. Do not use cleaning agents to clean the plastic parts of the tool. A mild detergent on a damp cloth is WARNING! DO NOT fit the recommended. bench grinder to the stand until the stand is bolted through General inspection or into the floor. Th
ページ11に含まれる内容の要旨
ページ12に含まれる内容の要旨
GMC customer assist If your product needs repairing, replacing, technical service or you simply need help or advice, please contact us on our Customer Assist Line 1300 880 001 (Australia) or 0800 445 721 (New Zealand). For prompt service we suggest you log your service request online at www.gmcservice.com.au. Should you not have access to the Internet, please contact our service department on 1300 880 001 (Australia) or 0800 445 721 (New Zealand). 7am –7pm, 7days a week (AEST). Please n
