Cooper Lighting Pole Mount Iconの取扱説明書

ページ1に含まれる内容の要旨

TM
Pole Mounted Icon
Sheet 1 of 5
INSTALLATION INSTRUCTIONS
3/11/04 IMI-593
IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE.
RETAIN FOR FUTURE REFERENCE.
General: Upon receipt of fixture thoroughly inspect for any Safety: This fixture must be wired in accordance with
freight damage, which should be brought to the attention of the national electrical code and applicable local codes
the delivery carrier. Compare the catalog description listed and ordinance. Proper grounding is required to in

ページ2に含まれる内容の要旨

TM Pole Mounted Icon Sheet 2 of 5 INSTALLATION INSTRUCTIONS 3/11/04 IMI-593 IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN FOR FUTURE REFERENCE. WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing or servicing. Reflector Connector Reflector Reflector Tabs Fig. 2c Fig. 2b 3. Power Supply Tray Removal - Unscrew the two THUMB SCREWS and swing the POWER SUPPLY TRAY down as shown in Figure 3a. Disconnect the POWER CONNECTOR and the OPTIC CONNE

ページ3に含まれる内容の要旨

TM Pole Mounted Icon Sheet 3 of 5 INSTALLATION INSTRUCTIONS 3/11/04 IMI-593 IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN FOR FUTURE REFERENCE. WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing or servicing. 4. Attach Arm to Pole - Slide the NUT PLATE into the POLE. Install the THREADED RODS through the holes in the POLE and into the NUT PLATE. Slide the ARM over the THREADED RODS. See Figure 4. Arm NOTE: Use of a thread locking compou

ページ4に含まれる内容の要旨

TM Pole Mounted Icon Sheet 4 of 5 INSTALLATION INSTRUCTIONS 3/11/04 IMI-593 IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN FOR FUTURE REFERENCE. WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing or servicing. Fig. 5b Wireway Plug Nut Lock Washer Plain Washer 6. Making Connections- Make the fixture connections in the ARM. Insert the wires into the arm and reinstall the WIREWAY DOOR as shown in Figure 6. Linear Upsweep Arm Arm Wireway Wirew

ページ5に含まれる内容の要旨

TM Pole Mounted Icon Sheet 5 of 5 INSTALLATION INSTRUCTIONS 3/11/04 IMI-593 IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN FOR FUTURE REFERENCE. WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing or servicing. 7. Buttoning Up - Re-install the POWER SUPPLY TRAY to the HOUSING. Connect the POWER CONNECTOR and OPTIC CONNECTOR. Swing the POWER SUPPLY TRAY up and tighten the two THUMB SCREWS. Re-install the REFLECTOR to the HOUSING. Connect t