ページ1に含まれる内容の要旨
Owner's Information
Owner's Information
Dealer
Company
TM
Address
Owners Manual
Owners Manual
Phone
For
E-Mail
Deluxe System D-1000
Premier System D-2000
Installer
Company
Elite System D-3000
Address
Phone
Warranty Turned In / Date
Model
Serial Number
Equipment Pack
Color
Date of Delivery
We Appreciate your business and our sincere desire is that you receive
years of pleasure and therapy from your Dynasty Spa. Please call your
local Dynasty Spa Dealer if you have any questions or problems. If th
ページ2に含まれる内容の要旨
Owner's Information Owner's Information Dealer Company Address Phone E-Mail Installer Company Address Phone Warranty Turned In / Date Model Serial Number Equipment Pack Color Date of Delivery We Appreciate your business and our sincere desire is that you receive years of pleasure and therapy from your Dynasty Spa. Please call your local Dynasty Spa Dealer if you have any questions or problems. If they are unavailable, please feel free to call the Dynasty Spas Customer Service Group at: 800-951-6
ページ3に含まれる内容の要旨
TM Dyna st y Spa s Owners Manual Dyna st y Spa s Owners Manual Table Of Contents 2 Owners Information............................ 5 Safety Instructions.............................. 7 Basic Introductory Information........... 8 Set-Up & Delivery Guidelines............. Wiring Diagram................................... 10 11 Pre-Operation Instructions................. D-1000 Control System....................... 12 14 D-2000 Control System....................... 16 D-3000 Control System..........
ページ4に含まれる内容の要旨
Dear Dynasty Spa Owner: Congratulations on your purchase of a new Dynasty Spa. You now possess the ultimate passport to tranquility - a miniature vacation at home, ready and waiting for you in your own backyard! We want you to enjoy your Dynasty Spa. Many hours of research have gone into the design of your spa, to ensure the ultimate in hydrotherapy and relaxation. Only the highest quality components have been used, to ensure years of trouble-free operation. Your comfort and enjoyment has been
ページ5に含まれる内容の要旨
Important Safet y Instructions When installing and using this electrical equipment, basic safety precautions should be followed, including the following: 1) READ AND FOLLOW ALL INSTRUCTIONS. 2) WARNING: To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times. Keep Spa cover locked when not in use. 3) A wire connector is provided on 220 V units to connect a minimum No. 8 AWG (8.4 mm2) solid copper conductor betw
ページ6に含まれる内容の要旨
Important Safet y Instructions Persons suffering from obesity or with a medical history of heart disease, low or high blood pressure, circulatory system problems, or diabetes should consult a physician before using a spa. Persons using medication should consult a physician before using a spa since some medication may affect heart rate, blood pressure, and circulation. 9) The causes, symptoms and affects of hyperthermia may be described as follows: Hyperthermia occurs when the internal te
ページ7に含まれる内容の要旨
Ba sic Introductory Information Congratulations on the purchase of your new spa. Our purpose is to provide you with a warm and relaxing spa which incorporates a soothing water massage. In order to maximize the pleasure of your spa, you will need to understand how it works. The following operating and maintenance instructions are very important and must be followed carefully. With proper care and maintenance your spa will provide you with years of satisfaction with minimum effort. The pump and he
ページ8に含まれる内容の要旨
Set-up & Delivery Guidelines Getting Ready For Delivery & Set-up Of Your New Spa Surface And Pad Requirements Your new portable spa must be placed on a uniformly firm, flat, and level surface. A concrete pad 4 inches thick is best. If your spa is located near sprinklers, adjust or cap them so as not to hit the siding of the spa. Balconies And Deck Requirements Decking must be constructed to support 85 pounds per square foot. Balconies must be constructed to meet current state and local codes. Ga
ページ9に含まれる内容の要旨
Set-up & Delivery Guidelines Getting Ready For Delivery & Set-up Of Your New Spa Wiring Requirements (Cont.) Extension Cords are not to be used in conjunction with operation of the spa. Low voltage damage could result, which is not covered by warranty. If you have any doubts, have your electrical system checked by a qualified electrician. It is the customers responsibility to acquire necessary permits, to arrange for installation and hook up of the electrical power. 9
ページ10に含まれる内容の要旨
Wiring Diagr am Factory Recommended G.F.C.I Load Center Wiring Note: The white neutral wire from the back of the G.F.C.I MUST be connected to an incoming line neutral. The internal mechanism of House Breaker Box the G.F.C.I. requires this neutral connection. The G.F.C.I. will not work without it. RED (HOT) BLK (HOT) WHT GRN G.F.C.I. Breaker Box Bottom View of G.F .C.I. (Square D) Front View of G.F.C.I. (Square D) RED (HOT) BLK (HOT) WHT WHT Spa System Box TB1 1 2 WHITE (NEUTRAL) 3 BLK (HOT) 4 R
ページ11に含まれる内容の要旨
Gener al Pre-Oper ation Instructions Priming Pump For Electric Packs The Power pack system is located under the wood skirt. The equipment can be serviced by simply opening the doors. It is important to make sure that all of the air is out of the equipment pack before operating. To do this follow procedures below: Turn off power at the breaker Make sure the gate valves are open Fill the spa with water going thru the filter Turn the power on at the breaker Start the pump on Hi-Speed and water will
ページ12に含まれる内容の要旨
Top Side Control Instructions Depending on the Dynasty Spa model you purchased, you'll have different options available to you with Dynasty's digital controls. The operations of your hot tub can be enjoyed at the touch of a button. This section is designed to walk you through the details of the operation of the Dynasty 1000, 2000 & 3000 controls. D - 1000 System Initial Start-up When your spa is first powered up, it will automatically heat and maintain 100 F until you change the setting temperat
ページ13に含まれる内容の要旨
Top Side Control Instructions Preset Filter Cycles Your spa will automatically filter itself twice each day. The first filter cycle will begin 1 minute after the spa is energized. The second filter cycle will begin 12 hours after the start of the first filter cycle. Filter duration is programmable at the topside panel for 0, 1, 2, 3, 4 or 12 hours. The default filter time is 2 hours. To program, press the or pad, then the pad. Continue to press the
ページ14に含まれる内容の要旨
Top Side Control Instructions D - 2000 System Initial Start-up When your spa is first powered up, it will automatically heat and maintain 100 F until you change the set temperature. Temperature Adjustment Press the pad to display the temperature setting. The set temperature is flashed on the display. In a few seconds, the numbers will stop flashing, and the display will show the actual water temperature. Pressing the pad a second time will cause the set temperature to increase or de
ページ15に含まれる内容の要旨
Top Side Control Instructions Preset Filter Cycles (cont.) 1 minute after the spa is energized. The second filter cycle will begin 12 hours after the start of the first filter cycle. Filter duration is programm- able at the topside panel for 0, 1, 2, 3, 4 or 12 hours. To program, press the SET pad, then the JETS pad. Press the SET pad again and F2 will be displayed on the panel. (F2 is the default filter time and indicates a 2 hour cycle). Continue pressing SET to cycle through the rest of the
ページ16に含まれる内容の要旨
Top Side Control Instructions D - 3000 System D - 3000 System auxiliary panel (optional) Initial Start-up When your spa is first powered up, it will automatically heat and maintain 100 F until you change the set temperature. Temperature Adjustment The current temperature is constantly displayed on the LCD. Press either or pad once to display the set temperature. (The temperature is designated by a triangle in the upper left corner.) Each time either pad is pressed, the se
ページ17に含まれる内容の要旨
Top Side Control Instructions Circulation Pump (optional) When the water is at set temperature or below, the circulation pump (if installed) runs 24 hours a day. However, it turns off a 2 F above set temperature and comes back on for 1 hour every 3 hours until it reaches set temperature again. Blower (optional) Press the pad once to turn the blower on high. Press a second time, blower is on low speed. Press a third time to turn off. The blower will automatically turn itself off af
ページ18に含まれる内容の要旨
Top Side Control Instructions Diagnostic Messages Overheat Protection (Spa is deactivated) OH DO NOT ENTER THE WATER. If the spa water has reached 112 F, remove the spa cover to cool the water. Overheating may occur if the filter cycle is set too long. At 110 F, the spa should reset itself. If the high limit sensor detects 118 F at the heater, the spa will shut down. When the heater cools to 110 F, press any button to reset the spa. If the spa will not reset, then shut off power to the spa a
ページ19に含まれる内容の要旨
Air Venturies & Diverter Valve Controls Mini Diverter Valve This valve will allow the water flow control of neck and shoulder jets located in the trilogy / ultrassage seats. A simple turn of the pointer toward the seat will increase to the maximum output allowed. Another turn of the point - away from the seat will decrease / turn off the neck / shoulder jets. Each individual jet is also independently adjustable. Air Venturies Each spa is equipped with 2 air controls (venturies), located next to
ページ20に含まれる内容の要旨
Filter Loc ation Single Filter Single Filter Location Dual Filter Dual Filter Location Note: The filter should be inspected and cleaned on a monthly basis. 20
