ページ1に含まれる内容の要旨
HUM
Humidifiers
HOMEOWNER’S MANUAL
Model HUMCCLFP1025-A--
Model HUMCCSFP1016-A--
Fan-Powered Humidifier
Fan-Powered Humidifier
Model HUMCCLBP2018-A--
Bypass Humidifier
Model HUMCCWTR2019-A-- Model HUMCCSBP2017-A--
Water-Saver Bypass Humidifier Bypass Humidifier
NOTE TO INSTALLER: This manual should be left with the equipment user.
ページ2に含まれる内容の要旨
the large evaporator pad. Hot, dry air from the furnace passes REFRESHING MOISTURE . . . through the pad and absorbs the water. Then, this moisture-laden AS NATURE INTENDED air is distributed throughout the house via the ductwork. See Fig. Congratulations on your excellent choice and sound investment 1, 2, and 3. in this addition to your home comfort system. Your humidifier represents both the latest in engineering devel- opment and the culmination of many years of experie
ページ3に含まれる内容の要旨
• Supply- and return-air grilles should not be blocked by items SOLENOID VALVE such as drapes, furniture, and toys. Restricted airflow reduces the efficiency of the humidifier, as well as that of the whole com- DISTRIBUTOR COVER fort system. DISTRIBUTOR PAN • The humidifier unit must be properly maintained on a regular basis. EVAPORATOR PAD STARTUP PROCEDURES 1. Open the saddle valve on the water supply line. (See Fig. 4.) Set humidistat to the desired relative humidity. (See Fig
ページ4に含まれる内容の要旨
SHUTDOWN PROCEDURES CLEANING PROCEDURES Models HUMCCLBP, HUMCCSBP, HUMCCLFP, and To shut down your humidifier, close the saddle valve on the wa- HUMCCSFP ter line. Then turn off the humidistat. When set to the OFF posi- tion, the humidistat shuts off the electrical power to the solenoid 1. Turn off all electrical power to the humidifier and furnace valve on the humidifier. or fan coil. NOTE: If your home comfort system includes cooling, be sure 2. Turn off the humi
ページ5に含まれる内容の要旨
4. Remove the front door from the humidifier. Rotate the BEFORE YOU REQUEST A “SERVICE CALL’’ latches one-half turn, then pull the door forward. BEFORE YOU CALL FOR SERVICE, CHECK FOR 5. Remove and inspect the evaporator pad assembly. Lift the THESE EASILY SOLVED PROBLEMS: bearing from its retainer. (See Fig. 10.) Pull the assembly away from the motor to disengage the assembly shaft from • Check the main power disconnect the motor coupling. Remove assembly through t
ページ6に含まれる内容の要旨
6
ページ7に含まれる内容の要旨
7
ページ8に含まれる内容の要旨
Record the model and serial numbers of your new humidifier in the following spaces. This information, along with the other ready-reference facts requested below, may be required if you should ever need information or service. Model No._________________________________________ Serial No. _________________________________________ Date Installed ______________________________________ Dealer Name_______________________________________ Address___________________________________________ City ___
