Bogen CommunicationsBAL2Sの取扱説明書

ページ1に含まれる内容の要旨

Block Diagram
BAL2S
Balanced Input
Module
Features
• Balanced high-impedance inputs
• Selectable channel gain (0 dB or 18 dB)
• Variable signal ducking when muted
• Fade back from mute level
• Can be muted from higher priority modules
50 Spring Street, Ramsey, NJ 07446 U.S.A.
201-934-8500; Fax: 201-934-9832
Printed in Taiwan. 0208
© 2002 Bogen Communications, Inc.
www.bogen.com
54-2081-01R1
Specifications subject to change without notice.

ページ2に含まれる内容の要旨

Module Installation Input Wiring 1. Turn off all power to the unit. Balanced Connection Unbalanced Connection Use this wiring when the source equipment supplies a Use this wiring when the source equipment supplies an 2. Make all necessary jumper selections. balanced, 3-wire output signal. unbalanced, 2-wire output signal. 3. Position module in front of desired module For either input, connect the shield wire of the source sig- For either input, short the input minus “-” terminals to the bay open

ページ3に含まれる内容の要旨

Block Diagram BAL2S Balanced Input Module Features • Balanced high-impedance inputs • Selectable channel gain (0 dB or 18 dB) • Variable signal ducking when muted • Fade back from mute level • Can be muted from higher priority modules 50 Spring Street, Ramsey, NJ 07446 U.S.A. 201-934-8500; Fax: 201-934-9832 Printed in Taiwan. 0208 © 2002 Bogen Communications, Inc. www.bogen.com 54-2081-01R1 Specifications subject to change without notice.