ページ1に含まれる内容の要旨
Model No. DRTL11720
Serial No.
Find the serial number in the location
shown below. Write the serial number
USER'S MANUAL
in the space above for reference.
Serial Number Decal
QUESTIONS?
If you have questions, or if there
are missing parts, we will guar-
antee complete satisfaction
through direct assistance from
our factory.
TO AVOID DELAYS, PLEASE
CALL DIRECT TO OUR TOLL-
FREE CUSTOMER HOT LINE.
The trained technicians on our
Customer Hot Line will provide
immediate assistance, free of
charge t
ページ2に含まれる内容の要旨
TABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 O
ページ3に含まれる内容の要旨
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. 1. It is the responsibility of the owner to ensure 12. Failure to use a properly functioning surge that all users of this treadmill are adequately suppressor could result in damage to the con- informed of all warnings and precautions. trol system of the treadmill. If the control sys- tem is damaged, the wa
ページ4に含まれる内容の要旨
21. Do not change the incline of the treadmill by from your CD player or VCR when you are not placing objects under the treadmill. using them. 22. When folding or moving the treadmill, make 26. Inspect and properly tighten all parts of the sure that the storage latch is fully closed. treadmill regularly. 23. When using iFIT.com CD’s and videos, an 27. Never insert or drop any object into any electronic “chirping” sound will alert you opening. when the speed and/or incline of the treadmill is ab
ページ5に含まれる内容の要旨
BEFORE YOU BEGIN ® Thank you for selecting the revolutionary PROFORM Department toll-free at 1-800-999-3756, Monday C1250 treadmill. The C1250 treadmill combines ad- through Friday, 6 a.m. until 6 p.m. Mountain Time (ex- vanced technology with innovative design to help you cluding holidays). To help us assist you, please note get the most from your exercise program in the conve- the product model number and serial number before nience of your home. And when you’re not exercising, calling. The mo
ページ6に含まれる内容の要旨
ASSEMBLY Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires your own phillips screw- driver and rubber mallet . Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton.
ページ7に含まれる内容の要旨
4. Make sure that the front edge of the Right Foam Grip (75) 4 is under the Console Base (81) as shown. Tighten a 3/4” 81 Screw (100) into the side of the Right Foam Grip as A shown. Note: It may be necessary to pull the Foam Grip outward slightly (see arrow A) to align the Screw with the hole in the post. 100 Attach the other Handrail Extension (not shown) and the 75 Left Foam Grip (not shown) as described in step 3 and this step. 5. Press the Lock Knob Sleeve (70) into the left Upright (69).
ページ8に含まれる内容の要旨
OPERATION AND ADJUSTMENT TM THE PERFORMANT LUBE WALKING BELT an equipment-grounding conductor and a grounding plug. Plug the power cord into a surge suppressor, Your treadmill features a walking belt coated with and plug the surge suppressor into an appropriate TM PERFORMANT LUBE , a high-performance lubricant. outlet that is properly installed and grounded in IMPORTANT: Never apply silicone spray or other accordance with all local codes and ordinances. substances to the walking belt or the walk
ページ9に含まれる内容の要旨
CONSOLE DIAGRAM Manual/Program Indicators Display Program Display Display Program Indicators Key Note: If there is a thin sheet Clip of clear plastic on the face Pulse Display of the console, remove it. Thumb Pulse Sensor The console also features new iFIT.com interactive technology. iFIT.com technology is like having a per- CAUTION: Before operating the sonal trainer right in your home. Using the included console, read the following precautions. audio cable, you can connect the treadmill to yo
ページ10に含まれる内容の要旨
HOW TO TURN ON THE POWER To stop the walking belt, press the Stop button. The Time/Segment Time display will begin to Plug in the power cord (see HOW TO PLUG IN flash. To restart the walking belt, press the Start 1 THE POWER CORD on page 8). button or the Speed button. Note: During the first few minutes that the treadmill Locate the on/off 2 switch on the treadmill is used, inspect the alignment of the walking belt On near the power cord. and align it if necessary (see page 21). Position M
ページ11に含まれる内容の要旨
Calories/Fat Calories thumbs on the sensor for another 15 seconds for display—This the most accurate reading. If the displayed heart display shows the rate appears to be too high or too low, or if your approximate numbers of heart rate is not displayed, lift your thumbs off the calories and fat calories sensor and allow the display to reset. Then, place you have burned (see your thumbs on the sensor as described above. FAT BURNING on page 22). Every seven sec- Remember to stand still while measu
ページ12に含まれる内容の要旨
The program display the highest indicators in the columns will appear in will show a simplified the program display. When the speed settings profile of the program move to the left again and not all of the indicators you have selected. The in the Current Segment column are lit, the speed Time/Segment Time settings will move back up. display will show how long the program will If the speed or incline setting for the current last. segment is too high or too low, you can manually override the sett
ページ13に含まれる内容の要旨
HOW TO CONNECT YOUR PORTABLE STEREO HOW TO CONNECT THE TREADMILL TO YOUR CD PLAYER, VCR, OR COMPUTER Note: If your stereo has an RCA-type AUDIO OUT jack, see instruction A below. If your stereo has a 3.5mm LINE OUT jack, see instruction B. If your To use iFIT.com CD’s, the treadmill must be con- stereo has only a PHONES jack, see instruction C. nected to your portable CD player, portable stereo, home stereo, or computer with CD player. See pages A. Plug one end of the audio cable into the jack
ページ14に含まれる内容の要旨
HOW TO CONNECT YOUR HOME STEREO HOW TO CONNECT YOUR COMPUTER Note: If your stereo has an unused LINE OUT jack, Note: If your computer has a 3.5mm LINE OUT jack, see instruction A below. If the LINE OUT jack is see instruction A. If your computer has only a being used, see instruction B. PHONES jack, see instruction B. A. Plug one end of the audio cable into the jack on the A. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the front of the tr
ページ15に含まれる内容の要旨
HOW TO CONNECT YOUR VCR HOW TO USE IFIT.COM CD AND VIDEO PROGRAMS Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV To use iFIT.com CD’s or videocassettes, the treadmill with a built-in VCR, see instruction B. If your VCR must be connected to your portable CD player, portable is connected to your home stereo, see HOW TO stereo, home stereo, computer with CD player, or CONNECT YOUR HOME STEREO on page
ページ16に含まれる内容の要旨
If the speed or incline settings are too high or too • Adjust the volume of your CD player or VCR. low, you can manually override the settings at any If the volume is too high or too low, the con- time by pressing the Speed or Incline buttons on sole may not detect the program signals. the console. However, when the next “chirp” is • Make sure that the audio cable is properly heard, the speed and/or incline will change to connected, that it is fully plugged in, and that the next settings of the
ページ17に含まれる内容の要旨
Return to the treadmill and stand on the foot HOW TO USE PROGRAMS DIRECTLY FROM 7 rails. Find the clip attached to the key and slide OUR WEB SITE the clip onto the waistband of your clothes. When the on-screen countdown ends, the program Our Web site at www.iFIT.com allows you to access will begin and the walking belt will begin to move. basic programs, audio programs, and video programs Hold the handrails, step onto the walking belt, and directly from the internet. Additional options
ページ18に含まれる内容の要旨
THE INFORMATION MODE/DEMO MODE HOW TO ADJUST THE CUSHIONING SYSTEM The console features an information mode that keeps The treadmill features a cushioning system that reduces track of the total number of hours that the treadmill has the impact as you walk or run on the treadmill. The been operated and the total number of miles that the firmness of the cushioning system is controlled by the walking belt has moved. The information mode also adjustable cushions at the center of the treadmill (there
ページ19に含まれる内容の要旨
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE 1 Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be damaged. Make sure the adjustable cushion is in a set position (see page 18). Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower, or move the treadmill. 1. Hold the treadmill with your hands in the locations shown at the right. CAUTION: To decrea
ページ20に含まれる内容の要旨
TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). PROBLEM: The power does not turn on SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properl
