ページ1に含まれる内容の要旨
Model No. PFTL49507.0
Serial No.
USER'S MANUAL
Write the serial number in the
space above for future reference.
Serial Number Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if parts are
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.
CALL TOLL-FREE:
1-888-533-1333
Mon.–Fri. 6 a.m.–6 p.m. MST
Sat. 8 a.m.–4 p.m. MST
ON THE WEB:
www.proformservice.com
CAUTION
Visit our website at
Read a
ページ2に含まれる内容の要旨
TABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . .
ページ3に含まれる内容の要旨
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. ICON assumes no re- sponsibility for personal injury or property damage sustained by or through the use of this product. 1. Before beginning this or any exercise pro- carrying 15 or more amps. No other appliance gram, consult your physician. This is espe- should be on the same circuit. Do not use an cially
ページ4に含まれる内容の要旨
20. Never leave the treadmill unattended while it 24. Inspect and properly tighten all parts of the is running. Always remove the key, unplug treadmill regularly. the power cord, and switch the reset/off cir- cuit breaker to the off position when the 25. DANGER: Always unplug the power treadmill is not in use. (See the drawing on cord immediately after use, before cleaning the page 5 for the location of the circuit breaker.) treadmill, and before performing the mainte- nance and adjustment pro
ページ5に含まれる内容の要旨
BEFORE YOU BEGIN ® Thank you for selecting the revolutionary PROFORM ual. To help us assist you, note the product model SPORT 1100 treadmill. The SPORT 1100 treadmill of- number and serial number before contacting us. The fers an impressive array of features designed to make model number and the location of the serial number your workouts at home more enjoyable and effective. decal are shown on the front cover of this manual. And when you’re not exercising, the unique SPORT 1100 treadmill can b
ページ6に含まれる内容の要旨
3 (106)–4 2 1/2” Bolt (37)–2 ASSEMBLY Wheel Nut (32)–2 3 1/2” Bolt (45)–4 To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not Handrail Bolt (64)–4 dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubrican
ページ7に含まれる内容の要旨
2. Slide a Front Endcap (80) onto the Base (81). 2 Partially tighten an Endcap Screw (79) into the Front Endcap and the Base. 79 80 81 Slide a Wheel Housing (86) onto the Base (81). Attach the Wheel Housing with a 1" Tek Screw (77), a Base Pad (89), and a 1 1/4" Tek Screw (49) as shown. 86 Attach an additional Base Pad (89) to the Base 89 (81) with a 1" Tek Screw (77). 77 89 49 77 3. With the help of a second person, carefully tip 3 the treadmill onto its right side as shown. 81 Partially fold
ページ8に含まれる内容の要旨
5. With the help of a second person, carefully raise 5 the Left Upright (70) and the Right Upright (not shown) to a vertical position. Remove the knob from the pin. Make sure that the collar and the spring are on the pin. (Note: If there are two collars, place one on each side of the spring.) Then, insert the pin into the Latch 70 71 Housing (71), and tighten the knob onto the pin. Knob See steps 2 and 4. Fully tighten the two Spring Endcap Screws (79). Collar Pin 6. Slide a Handrail (62) onto
ページ9に含まれる内容の要旨
8. While a second person holds the console as- 8 Console sembly near the Pulse Bar (66), connect the Assembly Console Ground Wire (107) on the Pulse Bar to the ground wire from the console assembly. Connect the wire from the console assembly to 75 Ground the Upright Wire (75). Make sure to connect Wire the connectors properly (see the inset draw- ing). The connectors should slide together easily and snap into place. If the connectors do not slide together easily and snap into place, 107 turn one
ページ10に含まれる内容の要旨
11. Lower the Uprights (70, 76) as shown. 11 Console Assembly Start First Start the two indicated Console Screws (67) into the Left and Right Uprights (70, 76) and the con- 67 sole assembly. If necessary, pull back on the console assembly slightly to align the holes in the Uprights with those on the console assem- Start 70 bly. Start the other two Console Screws be- First fore tightening all four Console Screws; do not overtighten the Console Screws. 67 76 12. See the inset drawing. Push the Up
ページ11に含まれる内容の要旨
OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT tric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding Your treadmill features a walking belt coated with high- plug. Plug the power cord into a surge suppressor, performance lubricant. IMPORTANT: Never apply sil- and plug the surge suppressor into an appropriate icone spray or other substances to the walking outlet that is properly installed and grounded in belt or the walking platform. Su
ページ12に含まれる内容の要旨
CONSOLE DIAGRAM Key Clip Note: If there is a thin sheet of plastic on the face of the console, remove it. FEATURES OF THE CONSOLE tom workout programs and save them in memory for ETPF49507 future use. PFTL49507 The treadmill console offers an impressive array of features designed to help you get the most from your To use the manual mode of the console, follow the workouts. When you use the manual mode of the con- steps beginning on page 13. To use a personal trainer sole, you can change the s
ページ13に含まれる内容の要旨
HOW TO TURN ON THE POWER 3. Start the walking belt. IMPORTANT: If the treadmill has been exposed to To start the walking belt, cold temperatures, allow it to warm to room tem- press the Start button, perature before turning on the power. If you do not the Quick Speed in- do this, the console displays or other electrical crease button, or one of components may become damaged. the speed buttons num- bered 1 through 10. Plug in the power cord (see page 11). Next, lo- If you press the Start button
ページ14に含まれる内容の要旨
The Calories/Distance To review specific information, press the Display display—This display button repeatedly until the displays show the infor- will show the approxi- mation that you are most interested in viewing. mate number of calories you have burned and the 6. Measure your heart rate if desired. distance that you have walked or run during your workout. The display will Before using the handgrip pulse sensor, remove change from one measurement to the other every the sheets of clear plastic
ページ15に含まれる内容の要旨
HOW TO USE A PERSONAL TRAINER QUICK During the program, the profile will show your PROGRAM progress (see the drawing above). The flashing segment of the profile represents the current seg- 1. Insert the key into the console. ment of the program. The height of the flashing segment indicates the speed setting for the current See HOW TO TURN ON THE POWER on page segment. At the end of each segment, a series of 13. tones will sound and the next segment of the profile will begin to flash. If a differ
ページ16に含まれる内容の要旨
4. Follow your progress with the matrix and the Each custom pro- displays. gram is divided into one-minute See step 5 on page 13. segments. One Current Segment speed setting and 5. Measure your heart rate if desired. one incline setting can be pro- See step 6 on page 14. grammed for each segment. The speed setting for the first segment will be shown in the flashing seg- 6. Turn on the fan if desired. ment of the profile. To program a speed setting and an incline setting for the first segment, si
ページ17に含まれる内容の要旨
HOW TO USE YOUR OWN QUICK PROGRAM The program will continue in this way until the last segment of the profile flashes in the Current 1. Insert the key into the console. Segment column and the last segment ends. The walking belt will then slow to a stop. See HOW TO TURN ON THE POWER on page 13. If desired, you can redefine the program while using it. To change the speed or incline setting 2. Select a custom quick programs. for the current segment, simply press the Power Incline, Quick Speed, or n
ページ18に含まれる内容の要旨
THE INFORMATION MODE An “E” for English miles or an “M” for metric kilometers will The console features an information mode that keeps appear in the Quick Speed dis- track of the total number of miles that the walking belt play. Press the Speed in- has moved and the total number of hours that the crease button to change the treadmill has been operated. The information mode unit of measurement. also allows you to select miles or kilometers as the unit of measurement and to turn on and turn off t
ページ19に含まれる内容の要旨
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If you do not do this, you may permanently damage the treadmill. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill. 1. Hold the metal frame firmly in the location shown by the arrow at the right. CAUTION: To decrease the possibility of injury, do not lift the frame by the plast
ページ20に含まれる内容の要旨
HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand. Pull the latch knob to the left and hold it. Pivot the frame down- ward until the catch is past the latch pin. Open Frame Latch Knob Latch Pin 2. Hold the metal frame firmly with both hands, and lower it to the floor. CAUTION: To decrease the possibility of injury, do not lower the frame by gripping only the plastic foot rails. Do not drop the frame to the floor. Make sure to bend your legs and keep
