AR-160/161 FM/E COVER 11/27/1998 AR-161 AR-161 Warning! This product is a class A product. If it is operated in households, offices or similar surroundings, it can produce radio interferences at other appliances, so that the user has to take adequate countermeasures. CLASS 1 LASER PRODUCT VAROITUS! LAITTEEN KÄYTTÄMINEN MUULLA KUIN TÄSSÄ LASER KLASSE 1 KÄYTTÖOHJEESSA MAINITULLA TAVALLA SAATTAA ALTISTAA KÄYTTÄJÄN LUOKAN 1 LASERLAITE TURVALLISUUSLUOKAN 1 YLITTÄVÄLLE NÄKYMÄTTÖMÄLLE KLASS 1 LASERAPP
AR-160/161 FM/E [1] GENERAL 11/27/1998 AR-161 4. System configuration [1] GENERAL Single pass feeder 1. General (AR-SP2) This model is a digital personal copier produced with key words of "Comfort able copy, Clear copy, Easy copy" providing high copy per- formances and copy productivity. 2. Target user copy volume: Monthly average Stand-alone copier: 2000~3000 sheets Compound machine: 4000~5000 sheets 3. Main features A. High-speed laser copying • First-copy time is only 7.2 seconds (normal mod
ページ5に含まれる内容の要旨
AR-160/161 FM/E [2] SPECIFICATIONS 11/27/1998 AR-161 E. Paper feed [2] SPECIFICATIONS Copy size (Max. ~ Min.) Cassette: (A3 ~ A6) Paper feed 1 cassette + Multi manual paper feed 1. Copy mode system A. Type Paper feed 250 × 1 (Paper feed tray) + 100 (Multi bypass 2 capacity feed tray)(56 ~ 80g/m equivalent) Type Desk-top Remaining Cassette section Empty detection available, B. Copy speed quantity detection size detection by key input Manual tray Only empty detection (1) Basic speed available 1 sc
ページ6に含まれる内容の要旨
AR-160/161 FM/E [2] SPECIFICATIONS 11/27/1998 AR-161 H. Warmup time N. Paper exit/finishing Paper exit Face down 250 sheets Warmup time Approx. 35 sec section capacity (Condition: Standard condition) Job separator Job separator, option (AR-TR2) Pre-heat Available Upper: FAX/Printer, Lower: Copier Jam recovery time Second Upper: 100sheets, Lower 150sheets (Condition: Left for 60 sec after door open. Standard condition, polygon motor not Full detection Available (Job separator upper step) stopped)
ページ7に含まれる内容の要旨
AR-160/161 FM/E [2] SPECIFICATIONS 11/27/1998 AR-161 P. machine composition V. Reliability Model Target users Stand-alone copier Monthly average 2,000 ~ 3,000 copies AR-160 Standard model Compound machine Monthly average AR-161 Standard model (with shifter) 4,000 ~ 5,000 copies (USA/Canada: with memory copy) W. Noise (1) Option Noise BA standard Machine Model Power supply 250 sheets paper feed unit AR-DE5 Supplied by the copier. X. Digital performance 500 sheets paper feed unit AR-DE6 Supplied b
ページ8に含まれる内容の要旨
AR-160/161 FM/E [3] CONSUMABLE PARTS 11/27/1998 AR-161 [3] CONSUMABLE PARTS 1. Supply system table A. USA, CANADA Product name of NO Name Content Life Package Remark other company 1 Developer cartridge (Black) Toner/developer cartridge × 1 15K AR-200TD 4 Life setting by A4 6% (Toner 610g, Developer 395g) (*1 AR-200TD-J) document Vinyl bag × 1 2 Drum cartridge Drum cartridge × 1 30K AR-200DR 4 (*1 AR-200DR-J) Vinyl bag × 1 3 Toner kit (Black) Toner bottle (Toner 610g) × 10 150K AR-200MT 1 Life s
ページ9に含まれる内容の要旨
AR-160/161 FM/E [3] CONSUMABLE PARTS 11/27/1998 AR-161 C. Europe / Australia / New Zealand / Middle East / Africa / CIS Product name of NO Name Content Life Package Remark other company 1 Developer cartridge (Black) Toner/developer cartridge × 1 15K AR-200DC 4 Life setting by A4 6% (Toner 610g, Developer 395g) document Vinyl bag × 1 2 Drum cartridge Drum cartridge × 1 30K AR-200DM 4 Vinyl bag × 1 3 Toner kit (Black) Toner bottle (Toner 610g) × 10 150K AR-200LT 1 Life setting by A4 6% document Ch
ページ10に含まれる内容の要旨
~ ~ ~ ~ AR-160/161 FM/E [3] CONSUMABLE PARTS 11/27/1998 AR-161 2. Environment conditions 3. Production number identification A. Transport condition
The label on the drum cartridge shows the date of production. (1) Transport conditions B Destination Serial number Production (* ) (00001-99999) month January 1 Indicates production in China. The end digit of production year September 9 * : Destination October 0 November X Division No. December Y Japan option 1 Ex option 2 Japan, sam
ページ11に含まれる内容の要旨
AR-160/161 FM/E [3] CONSUMABLE PARTS 11/27/1998 AR-161 4) Remove the DV blade. 4. Consumable parts recycling procedure Note: Be sure to remove adhesive completely. A. TD cartridge Remove adhesive together with the base PET. 1) Check the external view. Note: Be careful especially of breakage of the pins and the ATC sensor connector shown below. 5) Tilt the developing unit, rotate the DV gear clockwise, and remove developer. 2) Remove the waste toner box unit. 6) Clean and remove developer o
ページ12に含まれる内容の要旨
AR-160/161 FM/E [3] CONSUMABLE PARTS 11/27/1998 AR-161 11) Face the toner supply port of the toner box upward with the 17) Shake the developing unit 5 times left and right horizontally. toner bottle put straight, and insert the supply hose into the toner 18) Check the distribution state of developer on the MG roller. supply port. Rotate the MG roller and visually check for no improper distribu- tion of developer which may be caused by foreign materials. 19) Mark the number of times of recycli
ページ13に含まれる内容の要旨
AR-160/161 FM/E [3] CONSUMABLE PARTS 11/27/1998 AR-161 2) Remove the drum cover. 6) Remove the cleaning blade. Note: Dispose the cleaning blade which was removed. 7) Clean the cleaning section and the waste toner pipe to remove 3) Remove the drum fixing plate and the photoconductor drum. waste toner completely with a vacuum cleaner. (Note) Dispose the drum fixing plate which was removed. 8) Remove the felt and duplex tape completely. Note: Be careful not to scratch or bend the sub blad
ページ14に含まれる内容の要旨
AR-160/161 FM/E [3] CONSUMABLE PARTS 11/27/1998 AR-161 11) Attach the main charger. 12) Attach the drum fixing plate and the photoconductor drum. Apply grease to the inside of the photoconductor drum. (Dia. 2) 13) Attach the detection gear. Note: • The detection gear is not installed to the drum cartridge packed with the main body. Add a new one. 14) Attach the drum cover. Note: After attaching the drum cover, do not make a copy. 15) Mark the number of times of recycling on the side of the cover
ページ15に含まれる内容の要旨
AR-160/161 FM/E [4] EXTERNAL VIEWS AND INTERNAL STRUCTURES 12/1/1998 AR-161 [4] EXTERNAL VIEWS AND INTERNAL STRUCTURES 1. Appearance 1 Original cover 2 Original table (OC table) 3 Handles 4 Power switch 5 Operation panel 6 Paper output tray 7 Front cover 8 Paper tray 9 Side cover 10 Side cover handle 11 Bypass tray guides 12 Bypass tray 13 Bypass tray extension 2. Internal 1 Drum cartridge handle 2 Drum cartridge 3 TD cartridge handle 4 TD cartridge strap 5 TD cartridge 6 Roller rotating knob 7
ページ16に含まれる内容の要旨
AR-160/161 FM/E [4] EXTERNAL VIEWS AND INTERNAL STRUCTURES 12/1/1998 AR-161 3. Operation Section 1 Interrupt key and indicator 2 Copy quantity display 3 ZOOM indicator 4 Copy ratio display key 5 Zoom keys 6 PAPER SIZE ENTER key 7 AUDIT CLEAR key 8 PAPER SIZE indicators 9 Alarm indicators 10 POWER SAVE indicator 11 SPF indicator 12 Output tray full indicator 13 B/W REVERSE key and indicator 14 XY-ZOOM key and indicator 15 SORT/GROUP key and indicators 16 ORIGINAL DATA indicator 17 2 IN 1 / 4 IN 1
ページ17に含まれる内容の要旨
AR-160/161 FM/E [4] EXTERNAL VIEWS AND INTERNAL STRUCTURES 12/1/1998 AR-161 4. Motor, solenoid, clutch 1 23 4 5 6 7 8 9 13 12 11 10 No. Name Code Function, operation 1 Exhaust fan motor VFM Cools the inside of the machine. 2 Shifter motor Shifts the paper exit tray. (AR-161) 3 Toner motor TM Toner supply 4 Mirror motor MRM Drives the optical mirror base (scanner unit). 5 Cooling fan motor CFM Cools the inside of the machine. 6 Main motor MM Drives the machine. 7 Paper feed solenoid CPFS1 Soleno
ページ18に含まれる内容の要旨
AR-160/161 FM/E [4] EXTERNAL VIEWS AND INTERNAL STRUCTURES 12/1/1998 AR-161 5. Sensor, switch 12 3 4 5 6 7 8 9 10 11 12 15 13 14 No. Name Code Function, operation 1 Mirror home position sensor MHPS Detects the mirror (scanner unit) home position. 2 Cassette detection switch CSD1 Cassette detection 3 Toner density sensor TCS Toner quantity detection 4 Paper exit sensor (paper exit side) POD1 Detects paper exit. 5 Right door switch DSWR Side door open/close detection 6 Paper full sensor Paper exit
ページ19に含まれる内容の要旨
AR-160/161 FM/E [4] EXTERNAL VIEWS AND INTERNAL STRUCTURES 12/1/1998 AR-161 6. PWB unit 12 3 4 5 6 8 7 No. Name Function, operation 1 Copy lamp invertor PWB Copy lamp control 2 Power PWB AC power input/DC power control 3 High voltage PWB High voltage control 4 CCD sensor PWB Image scanning 5 Main PWB (MCU) Machine control/Image process 6 Paper exit interface PWB Paepr exit, finishing control 7 Electronic sort function Operation panel input/Display 8 Operation main PWB Operation panel input/Displ
ページ20に含まれる内容の要旨
AR-160/161 FM/E [4] EXTERNAL VIEWS AND INTERNAL STRUCTURES 12/1/1998 AR-161 7. Cross sectional view 12 3 4 5 6 18 7 8 9 19 10 11 12 17 16 15 14 13 No. Name Function/Operation 1 Copy lamp Image radiation lamp 2 Copy lamp unit Operates in synchronization with No. 2/3 mirror unit to radiate documents sequentially. 3 LSU unit Converts image signals into laser beams to write on the drum. 4 Lens unit Reads images with the lens and the CCD. 5 MC holder unit Supplies negative charges evenly on the drum
