Epson RX-8564LCの取扱説明書

デバイスEpson RX-8564LCの取扱説明書

デバイス: Epson RX-8564LC
カテゴリ: 時計
メーカー: Epson
サイズ: 0.39 MB
追加した日付: 10/17/2013
ページ数: 39
説明書を印刷

ダウンロード

使い方は?

私たちの目的は、皆様方にデバイスEpson RX-8564LCの取扱説明書に含まれたコンテンツを可能な限り早く提供することです。オンラインプレビューを使用すると、Epson RX-8564LCに関してあなたが抱えている問題に対する解決策の内容が素早く表示されます。

便宜上

説明書Epson RX-8564LCをこちらのサイトで閲覧するのに不都合がある場合は、2つの解決策があります:

  • フルスクリーン表示 – 説明書を(お使いのコンピュータにダウンロードすることなく)便利に表示させるには、フルスクリーン表示モードをご使用ください。説明書Epson RX-8564LCのフルスクリーン表示を起動するには、全画面表示ボタンを押してください。
  • コンピュータにダウンロード - Epson RX-8564LCの説明書をお使いのコンピュータにダウンロードし、ご自身のコレクションに加えることもできます。デバイス上のスペースを無駄にしたくない場合は、いつでもManualsBaseサイトでダウンロードすることもできます。
Epson RX-8564LC 取扱説明書 - Online PDF
Advertisement
« Page 1 of 39 »
Advertisement
印刷版

多くの人々は画面表示ではなく印刷された説明書を読むほうを好みます。説明書を印刷するオプションも提供されており、上記のリンクをクリックすることによりそれを利用できます - 説明書を印刷。説明書Epson RX-8564LCを全部印刷する必要はなく、選択したページだけを印刷できます。紙を節約しましょう。

要旨

次のページにある説明書Epson RX-8564LCの内容のプレビューは、以下にあります。次のページにある説明書の内容をすぐに表示したい場合は、こちらをご利用ください。

内容要旨
ページ1に含まれる内容の要旨


RM0403-3-E01





Application Manual


Real Time Clock Module



RX-8564LC



Model Product Number

RX-8564LC Q418564C0xxxx00































ページ2に含まれる内容の要旨

NOTICE • The material is subject to change without notice. • Any part of this material may not be reproduced or duplicated in any form or any means without the written permission of EPSON TOYOCOM. • The information, applied circuit, program, usage etc., written in this material is just for reference. EPSON TOYOCOM does not assume any liability for the occurrence

ページ3に含まれる内容の要旨

RX − 8564 LC CONTENTS 1. Overview...................................................................................................................1 2. Block diagram.........................................................................................................1 3. Terminal description.............................................................................................2 3.1. Terminal connections ....................................................................

ページ4に含まれる内容の要旨

RX − 8564 LC Low power consumption / Small size thin model package 2 I C-Bus Interface Real Time Clock Module RX − − 8564 LC − − • Built in frequency adjusted 32.768 kHz crystal unit. 2 • Interface type : 400 kHz two-wire I C-bus interface • Wide operating voltage range : 1.8 V to 5.5 V • Wide timekeeper voltage range : 1.0 V to 5.5 V ( at Ta = +25 °C ) ( Typ. ) • Low backup current : 275 nA / 3 V : C-MOS output with output control • 32.768-kHz clock freq

ページ5に含まれる内容の要旨

RX − 8564 LC 3. Terminal description 3.1. Terminal connections RX − 8564 LC 1. N.C. 12. N.C. N.C. 2. 11. CLKOE # 1 # 12 N.C. 3. 10. VDD N.C. 4. 9. CLKOUT # 6 # 7 5./INT 8.SCL 6. GND 7. SDA VSOJ − 12pin 3.2. Pin Functions Signal I/O Function name 2 SCL Input This is the serial clock input pin for I C Bus communications. This pin's signal is used for input and output of address, data, and ACK bits, 2 synchronized with the serial clock

ページ6に含まれる内容の要旨

RX − 8564 LC 4. External Dimensions / Marking Layout 4.1. External Dimensions RX − 8564 LC ( VSOJ − 12pin ) • External dimensions • Recommended soldering pattern ± 0.2 3.6 2.5 # 12 # 7 0.5 0.27 # 1 # 6 0.08 M 2.77 0.5 0.22 Unit : mm 0.08 4.2. Marking Layout RX − 8564 LC ( VSOJ − 12pin ) Type Logo E 8564 A123B #1 Pin Mark Production lot ∗ Contents displayed indicate the general markings and di

ページ7に含まれる内容の要旨

RX − 8564 LC 5. Absolute Maximum Ratings GND = 0 V Parameter Symbol Condition Rating Unit Supply Voltage VDD Between VDD and GND −0.5 to +6.5 V Supply Voltage IDD VDD pin −50 to 50 mA Input Voltage VI Input pin GND−0.5 to VDD+0.5 V Output Voltage VO /INT pin GND−0.5 to VDD+0.5 V DC Input Current II −10 to 10 mA DC Output Current IO to 10 mA −10 Storage Stored bare product after TSTG to +125 −55 °C Temperature Range unpacking 6. Recommended operating conditions GND =

ページ8に含まれる内容の要旨

RX − 8564 LC 8. Electrical Characteristics * Unless otherwise specified, GND = 0 V , VDD = 1.8 V to 5.5 V 8.1. DC characteristics , Ta = −40 °C to +85 °C Item Symbol Condition Min. Typ. Max. Unit 800 fSCL = 400 kHz µ A Current consumption IDD ∗ interface active 200 fSCL = 100 kHz µ A Current consumption 330 800 nA fSCL = 0 Hz, VDD = 5.0 V ∗ interface inactive IDD 275 700 nA fSCL = 0 Hz, VDD = 3.0 V ( fSCL = 0 Hz ) ∗ CLKOUT = disabled

ページ9に含まれる内容の要旨

RX − 8564 LC * Unless otherwise specified, GND = 0 V , VDD = 1.8 V to 5.5 V 8.2. AC electrical characteristics , Ta = −40 °C to +85 °C Item Symbol Condition Min. Typ. Max. Unit SCL clock frequency fSCL 400 kHz Start condition set-up time tSU; STA 0.6 µ s Start condition hold time tHD; STA 0.6 µ s Data set-up time tSU; DAT 100 ns Data hold time tHD; DAT 0 ns Stop condition set-up time tSU; STO 0.6 µ s Bus free time between a STOP tBUF 1.3 µ s and START co

ページ10に含まれる内容の要旨

RX − 8564 LC 9. Reference data [ Finding the frequency stability ] (1) Example of frequency and temperature characteristics θT = +25 °C Typ. 1. Frequency and temperature characteristics can be -6 -6 × 10 α = -0.035 × 10 Typ. approximated using the following equations. 0 2 ∆ fT = α ( θT − θX ) ! ∆ fT : Frequency deviation in any temperature ∆ 2 ! α [ 1 / °C ] : Coefficient of secondary temperature -50 −6 2 ( −0.035 ± 0.005 ) × 10 / °C ! θT [ °C ] : Ult

ページ11に含まれる内容の要旨

RX − 8564 LC 10. External connection example VDD SCL 2 I C-BUS Master SDA VDD SCL 8564 SLAVE ADRS = 1010001 SDA GND Pull up Registor t r R = C BUS VDD SCL 2 device I C-BUS SDA GND ETM12E-01 Page − 8

ページ12に含まれる内容の要旨

RX − 8564 LC 11. Application notes 1) Notes on handling This module uses a C-MOS IC to realize low power consumption. Carefully note the following cautions when handling. (1) Static electricity While this module has built-in circuitry designed to protect it against electrostatic discharge, the chip could still be damaged by a large discharge of static electricity. Containers used for packing and transport should be constructed of conductive materials. In addition, only solderi

ページ13に含まれる内容の要旨

RX − 8564 LC 12. Overview of Functions and Description of Registers 12.1. Overview of Functions 1) Clock functions This function is used to set and read out month, day, hour, date, minute, second, and year (last two digits) data. Any (two-digit) year that is a multiple of 4 is treated as a leap year and calculated automatically as such until the year 2099. ∗ For details, see "13.1. Description of Registers". 2) Fixed-cycle interrupt generation function The fi

ページ14に含まれる内容の要旨

RX − 8564 LC 12.2. Register table Address [h] Function bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0 note ∗3 , ∗4 00 Control 1 TEST 0 STOP 0 TEST 0 0 0 ∗4 , ∗5 01 Control 2 0 × 0 TI / TP AF TF AIE TIE 02 Seconds VL 40 20 10 8 4 2 1 ∗1 03 Minutes × 40 20 10 8 4 2 1 ∗5 04 Hours 20 10 8 4 2 1 × × ∗5 05 Days 20 10 8 4 2 1 × × ∗5 06 Weekdays 4 2 1 ∗5 × × × × × 07 Months / Century C 10 8 4 2 1 ∗5 × × 08 Years 80 40 20 10 8 4 2 1 09 Minute Alarm AE 40 20 10 8 4 2 1 0A Hour

ページ15に含まれる内容の要旨

RX − 8564 LC 13. Description of Functions 13.1. Description of registers 13.1.1. Control register 1 ( Reg − 00 [h] ) Address [h] Function bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0 00 Control 1 TEST 0 STOP 0 TEST 0 0 0 • This register is used to control stopping and starting of the clock function, calendar function, and other functions. 1) TEST bits (bit 7 and bit 3) These two TEST bits are for use by Seiko Epson Corporation. When initializin

ページ16に含まれる内容の要旨

RX − 8564 LC 13.1.2. Control register 2 ( Reg − 01 [h] ) Address [h] Function bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0 01 Control 2 0 × 0 TI / TP AF TF AIE TIE • This register is used to monitor various interrupt event settings and the conditions under which various interrupt- related events occur. 1) TI / TP bit ( Interrupt Signal Output Mode Select. Interrupt / Periodic ) When a fixed-cycle timer interrupt event occurs (when the TF bit goes from "0" to 1") , this bit

ページ17に含まれる内容の要旨

RX − 8564 LC 13.1.3. Clock counter ( Reg − 02 [h] to 04 [h] ) Function bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0 Address [h] 02 Seconds VL 40 20 10 8 4 2 1 03 Minutes 40 20 10 8 4 2 1 × 04 Hours × × 20 10 8 4 2 1 • The clock counter counts seconds, minutes, and hours. • The data format is BCD format. For example, when the "seconds" register value is "0101 1001" it indicates 59 seconds. ∗ When overwriting time data, we recommend setting "1" to the STOP bit to stop th

ページ18に含まれる内容の要旨

RX − 8564 LC 13.1.4. Calendar counter ( Reg − 05 [h] , 07 [h] , 08 [h] ) Function bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0 Address [h] 05 Days × × 20 10 8 4 2 1 07 Months / Century C 10 8 4 2 1 × × 08 Years 80 40 20 10 8 4 2 1 • The auto calendar function updates all dates, months, and years from January 1, 2001 to December 31, 2099. • The data format is BCD format. For example, a date register value of "0011 0001" indicates the 31st. ∗ Note with caution that writi

ページ19に含まれる内容の要旨

RX − 8564 LC 13.1.6. Alarm registers ( Reg − 09 [h] to 0C [h] ) Function bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0 Address [h] 09 Minute Alarm AE 40 20 10 8 4 2 1 0A Hour Alarm AE × 20 10 8 4 2 1 0B Day Alarm AE × 20 10 8 4 2 1 0C Weekday Alarm AE × × × × 4 2 1 • The AIE bit and AF bit can both be set or used when using alarm interrupt function to set interrupt events for dates, days, hours, minutes, etc. • When the current time matches the settings in the above alarm

ページ20に含まれる内容の要旨

RX − 8564 LC 13.1.9. CLKOUT output register (Reg - 0D [h]) Function bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0 Address [h] 0D CLKOUT frequency FE × × × × × FD1 FD0 • This register is used to control clock output via the CLKOUT output pin. • This register is valid only when the CLKOE input pin is at high level, at which time clock output is enabled or disabled (stopped) depending on the settings in this register. ∗ When the CLKOE input pin is at low level, CLKOUT is at lo


類似の説明書
# 取扱説明書 カテゴリ ダウンロード
1 Epson RTC-4543SB 取扱説明書 時計 2
2 Epson RX-8801SA/JE 取扱説明書 時計 1
3 Epson RX-8581JE 取扱説明書 時計 1
4 Epson RTC-72421 B 取扱説明書 時計 14
5 Epson RTC-72421 A 取扱説明書 時計 12
6 Epson RTC-72423 取扱説明書 時計 12
7 Epson RTC-72423 A 取扱説明書 時計 6
8 Epson RX-8581SA 取扱説明書 時計 0
9 Epson RX-8581NB 取扱説明書 時計 3
10 Epson RTC-4543SA 取扱説明書 時計 5
11 Philips 170P6 取扱説明書 時計 1
12 Acu-Rite 13239CCD 取扱説明書 時計 15
13 Philips AJ290/12 取扱説明書 時計 1
14 American Innovative, TMT081-US 取扱説明書 時計 6
15 Philips Professional 202P4 取扱説明書 時計 2