ページ1に含まれる内容の要旨
T-SERIES PORTABLE
BABY BASSINET ‘N CRADLE
WITH TOYBOX BASE
MODEL NUMBERS:
0850T White Batiste 0860T Sage Waffle Pleated
00750 Pink Waffle 0861T Ecru Waffle Pleated
00751 Blue Waffle 0854T Moon/Star
00752 Sage Waffle 0852T Sage Gingham
Assembly
Instructions.
Adult Assembly
Required.
Save these
instructions for
future use.
Visit us online at www.badgerbasket.com
Toll-Free Customer Service: 1-800-236-1310 (Monday through Thursday 7:30 AM to 4:30 PM CST)
Web: http://www.badgerbasket.com/parts • E-ma
ページ2に含まれる内容の要旨
BEFORE YOU BEGIN ASSEMBLY: Check all parts and hardware. If anything is missing or not satisfactory, please DO NOT call the store where purchased or return the product to them. Contact Badger Basket for assistance. Most problems are resolved without you needing to leave home. When contacting us, please have this instruction manual, your product model number, and your product version code ready. For fastest service, go to http://www.badgerbasket.com/parts Your Product Version Code is: 3.0/1108/TG
ページ3に含まれる内容の要旨
PARTS & HARDWARE: TOOLS NEEDED: Phillips Screwdriver* * Power screwdriver is helpful but be careful not to damage the product PARTS INCLUDED (pictures not to scale): (A) 2 - End Panels (G) 1 - Set of Caster Wheels, includes: (note inside and outside faces) 4 Wheels, 4 Bolts, 4 Knobs (B) 4 - Rails (H) 1 - Bassinet Body (not shown) (C) 8 - Bolts (I) 1 - Bedding Set (not shown), includes: (D) 2 - Nylon Snap Straps 1 Liner/Skirt, 1 Sheet, 1 Hood Cover (E) 2 - Dowels (J) 1 - Mattress Pad (not shown)
ページ4に含まれる内容の要旨
PICTURE 1 STEP 1: See PICTURE 1. Take ONE END PANEL (A) and attach the FOUR RAILS (B) using FOUR BOLTS D (C). A Attach the rails to the INSIDE FACE of the END B PANEL. The inside face has countersunk areas for the rails and slots that you will use later for the mesh basket. Position the bottom rails with the grooves facing B up; and position the top rails with the grooves facing down. Slip the TWO NYLON SNAP STRAPS (D) over B the TOP RAILS (B). Position them so that they are ready to snap to the
ページ5に含まれる内容の要旨
STEP 5: Unpack the BEDDING SET (I). You may launder the set be- fore use if you wish, and/or iron, press, or steam it to remove “Puzzle Piece” Fit wrinkles. Machine wash cold, gentle cycle only; air dry or tumble dry low or no heat. Iron on lowest setting for poly/ cotton. Locate the buttonholes on the FABRIC LINER and slip them over the PICTURE 4A spools on the BASSI- NET BODY (H). PICTURE 3B Smooth the liner around the sides and bottom in- side the bassinet, and adjust it around the outside of
ページ6に含まれる内容の要旨
PICTURE 7 To use the bassinet as a Rocking Cradle, loosen the caster knobs, rotate the casters into the up position, and retighten the knobs. See PICTURE 7. TO CONVERT THE STAND TO A TOY BOX PICTURE 8 STEP A: Remove the bedding, bassinet body, hood, wooden dowels, and mesh basket, and set them aside. STEP B: Unscrew and remove all four of the bolts holding the TOP RAILS and set aside the screws, rails, and nylon snap straps. STEP C: Insert the two larger SIDE PAN- ELS (L) into the grooves on the
