ページ1に含まれる内容の要旨
Operator's Manual
n
7.5 Horse Power
CHIPPER SHREDDER
Model No. 247.776350
CAUTION: Before
• Safety
using this product,
• Operation
read this manual and
• Maintenance
follow all safety rules
• Storage
and operating
• Espa5ol, p. 29
instructions.
For answers to your questions about this product, call:
1-800-659-5917
Sears Craftsman Help Line
(5 am. - 5 pro., Mon. - Sat.)
Sears, Roebuck And Co., Hoffman Estates, IL 60179 U.S.A.
Visit our website: www.sears.com/craftsman
769-00831
Printed in U.S.A.
ページ2に含まれる内容の要旨
Content Page Content Page Warranty 2 Service and Adjustments 15 Safety 3 Storage 17 Assembly 6 Troubleshooting 18 Operation 8 Parts List 20 Maintenance 13 Limited Warranty on Craftsman Chipper Shredder For one (1) year from the date of purchase, if this Craftsman Equipment is maintained, lubricated, and tuned up according to the instructions to the operator's manual, Sears will repair or replace free of charge any parts found to be defective in material or workmanship. Warranty service is availa
ページ3に含まれる内容の要旨
WARNING: This symbol points out important safety instructionswhich, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol - heed its warning. WARNING: Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to State of Calif
ページ4に含まれる内容の要旨
g. Replace gasoline capandtighten securely. 9. Never operate without the shredder hopper, h. Ifgasoline isspilled, wipeitofftheengine chipper chute, ordischarge chute properly attached to the machine. Neverinstalt or remove debris andequipment. Move machine toanother area. Wait5minutes before starting the collection bag while the engine is running. engine. 10. Keep all guards, deflectors and safety devices in i. Never storethemachine orfuelcontainer place and operating properly. inside wherether
ページ5に含まれる内容の要旨
Look For Relevant Emissions Durability Period and Air Index Information On Your Engine Emissions Label Engines that are certified to meet the California Air Resources Board (CARB) Tier 2 Emission Standards must display information regarding the Emissions Durability Period and the Air Index. Sears, Roebuck and Co., U.S.A. makes this information available to the consumer on our emission labels. The Emissions Durability Period describes the number of hours of actual running time for which the engin
ページ6に含まれる内容の要旨
IMPORTANT:This unit is shipped without gasoline or Pull the spring latch upward and gently pivot the oil in the engine, After assembly, see OPERATION chipper chute down until it clicks into the lock rod. section of this manual for proper fuel and engine oil fill- See Figure 2. up. This Chipper Shredder has been completely assembled at the factory, except for the debris collection bag, which is stowed in the chipper chute for shipping. Removing Unit From Carton Remove staples, break glue ontop fl
ページ7に含まれる内容の要旨
Attaching The Debris Collection Bag Emptying the Debris Collection Bag To attach the bag, place the opening of the bag Squeeze the locking buckle to release the bag's completely over the discharge chute. drawstrap before loosening it from the discharge Position the bag so that the wing knobs which chute. See Figure 5 secure the discharge chute to the housing are Empty the bag and reattach to the discharge chute completely covered. opening. Refer to Figure 4. Pull on the drawstrap until the bag i
ページ8に含まれる内容の要旨
Know Your Chipper Shredder Read this operator's manual and safety rules before operating your Chipper Shredder. Compare the illustrations below with your equipment to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. The operation of any Chipper Shredder can result in foreign objects being thrown into the eyes, which can result in severe eye damage. Always wear safety glasses, provided with the Chipper Shredder, while operating thi
ページ9に含まれる内容の要旨
WARNING: When moving throttle control Use the tamper to assist in feeding branches into the lever, be careful of heated surfaces on muffler Tamper ,_ chipper chute. guard. Hopper A CAUTION: Never stop the engine by Leaves, twigs and branches up to 1/2-inch in ,_. moving the choke lever into the CHOKE diameter may be placed into the hopper for shredding. position. Backfire, fire or engine damage could result. IMPORTANT: Never place branches with a diameter greater than 1/2-inch in the hopper. Doi
ページ10に含まれる内容の要旨
Tighten the dipstick before removing it and check To avoid engine problems, the fuel system should the oil fill level. See Figure 8. be emptied before storage for 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use Full fresh fuel next season. See STORAGE section for additional information. WARNING: Use extreme care when handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Never fuel machine indoors
ページ11に含まれる内容の要旨
Move chokelevertoCHOKE position. (Awarm Avoid shredding fibrous plants such as tomato engine maynotrequire choking). SeeFigure 10. vines until they are thoroughly dried out. Fresh vines do not shred well and tend to wrap themselves around the impeller and flails. Place reasonable amounts of debris into the hopper at a time. Do not overload the hopper. CHOKE Allow the material in the hopper to be drawn into the blades and shredded before adding additional debris to the hopper. Failure to due so m
ページ12に含まれる内容の要旨
Disconnect spark plug wire and keep away from Chipping spark plug. Refer to Page 15. WARNING: The muffler and surrounding shredder without chipper chute lowered into dl_ WARNING: Never operate the chipper area will be hot if the engine has been the operating position. running. Use caution and protect your hands if Branches up to 3" in diameter can be fed into the working near the muffler. chipper chute. See Figure 6.Observe the following Remove the two wing knobs on either side of the guidelines
ページ13に含まれる内容の要旨
Customer Responsibilities MAINTENANCE _ ,,o ,b _,_ m e _ SERVICE SCHEDULE no ._e6 _e.A ._e6 oe _o< DATES ,_ _ _ _ o_ ,_ Lube Spring Latch Lube Chipper Chute Hinge ,q_ a Lube DischargeChute q_ O InspectChipper Blades _ InspectShredder Blade ,:_ Check Oil Level Change Oil _ ,q_ Wz Clean Air Filter Precleaner _/7 ,_ Clean Engine <_ 4_ Check Spark Plug _ d Lubrication Air Cleaner Spring Latch: Lubricate the latch with light oil once a Clean air cleaner's precteaner every 25 hours under season normal
ページ14に含まれる内容の要旨
Lift air cleaner assembly (air cleaner cartridge and Changing Oil precleaner) off stud. To drain oil from the engine's crankcase, proceed as Push clean (or new) air cleaner assembly onto follows: stud. Air cleaner must fit securely on base. Push cover squarely onto base and tighten knob. Run the engine for a few minutes to allow the oil to warm up. Warm oil flows more easily and will carry NOTE: Clean pre-cleaner every few hours under away more impurities when draining oil. extremely dusty condi
ページ15に含まれる内容の要旨
WARNING: Always stop engine, disconnect spark plug wire and keep away Chipper Blade Lock Washer & Nut from spark plug, before performing any service or adjustments on your machine. Disconnecting Spark Plug WARNING: The muffler and surrounding area wilt be hot if the engine has been running. Use caution and protect your hands if working near the muffler. Locate the spark plug wire between the muffler and air cleaner. See Figure 17. Muffler Impeller Spark Plug Wire Hex Bolts & .__t Saddle Washers
ページ16に含まれる内容の要旨
Remove the two flange nuts (and hex bolts) which Insert a piece of wood into the discharge chute secure the hopper support bracket to the impeller opening to stabilize the impeller and prevent it from housing. Retain the hardware. See Figure 19. rotating when removing the shredder blade. Remove the two internal hex screws which secure the shredder blade to the impeller. See Figure 20. NOTE: Use a 3/16" hex key (Allen) wrench on the outside of the shredder blade and a 1/2" box (or socket) wrench
ページ17に含まれる内容の要旨
2. While engine is still warm, change oil. Chipper Shredder 3. Remove spark plug and pour about one (1) oz. (30 Clean the equipment thoroughly. ml.) of engine oil into spark plug hole. Replace Wipe equipment with an oiled rag to prevent rust. spark plug and slowly pull the starter rope to Store unit in a clean, dry area. Do not store next to distribute oil. corrosive materials such as fertilizer. 4. Clean engine of surface debris, chaff or grass. 5. Store in a clean, dry area. Engine WARNING: Do
ページ18に含まれる内容の要旨
Problem Cause Remedy Engine fails to start 1. Spark plugwire disconnected. 1. Connect wire to spark plug. , 2. Fuel tank empty or stale fuel. 2. Fill tank with clean, fresh gasoline. 3. Throttle control lever not in 3. Move throttle lever to FAST position. correct starting position. 4. Choke not in CHOKE position. 4. Move choke to CHOKE position. 5. Engine not primed. 5. Prime engine. 6. See Sears Service Center to have fuel 6. BIocked fuel system. system cleaned. 7. Faulty spark plug. 7. Clean,
ページ19に含まれる内容の要旨
(Thispageapplicable intheU.S.A.andCanada only.) Sears, Roebuck and Co., U,S,A. (Sears), the California Air Resources Board (GARB) and the United States Environmental Protection Agency (U.S. EPA) Emission Control System Warranty Statement (Owner's Defect Warranty Rights and Obligations) EMISSION CONTROL WARRANTY COVERAGE IS APPLICABLE TO CERTIFIED MODEL YEAR 1997 AND LATER ENGINES WHICH ARE CERTIFIED ENGINES PURCHASED IN CALIFORNIA IN 1995 AND PURCHASED AND USED ELSEWHERE IN THE UNITED STATES (AN
ページ20に含まれる内容の要旨
Sears Craftsman 7.5 H.P. Chipper Shredder Model 247.776350 23 25 6 17 19 8 J 27 / 22 45 44 22 32 12 47_. 56 34 55 ,\ ,\ 52 20 20
