ページ1に含まれる内容の要旨
Installation instructions
and User guide
Warming drawer
OD30WDX1 models
Instructions d’installation
et Guide d’utilisation
Le tiroir chauff ant
Modèles OD30WDX1
US CA
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
1 US CA WARNING! The warming drawer is not intended to be used in conjunction with water. DO NOT fill the drawer or warming cavity with water. Doing so could create a shock hazard, resulting in a possible injury. DO NOT use water on grease fires. Turn OFF the warming drawer, then smother the fire with baking soda or use a dry chemical or foam-type fire extinguisher. TO REDUCE THE RISK OF INJURY TO PERSONS AND PROPERTY DAMAGE IN THE EVENT OF A FIRE IN THE WARMING DRAWER, OBSE
ページ4に含まれる内容の要旨
2 US CA Contents SAFETY PRACTICES & PRECAUTIONS 3-4 FEATURES 5 INSTALLATION INSTRUCTIONS Specifications 6 Base Cabinet Installation 6 Wall Cabinet Installation 7 Step 1 - Removing the Drawer 8 Step 2 - Mounting Installation of Chassis 9-10 Step 3 - Replacing the Drawer 11 OPERATING INSTRUCTIONS Operational Guide 12 Preheat Time and Temperature Selector 12 Proofing Yeast Dough 12 CARE AND MAINTENANCE Cleaning the Warming Drawer 13 TEMPERATURE SETTINGS 14 SERVICE 15 WARRANTY 16-18
ページ5に含まれる内容の要旨
3 Safety practices and precautions US CA Read and Understand these Precautions Read this Installation Guide thoroughly before installation. This will help to reduce the risk of fire, electric shock, or injury to persons. Remove all packaging materials from your appliance. Install according to instructions. See page 5-9 to insure proper installation and servicing. Be sure to have a qualified service technician install and ground this appliance. Plug into rated outlet: 120 Vo
ページ6に含まれる内容の要旨
4 US CA Safety practices and precautions WARNING: This appliance is designed for warming food. Based on safety considerations, never use the warming drawer to warm or heat a room. As with any cooking or heating appliance, never leave the warming drawer unattended when warming food, this could be a fire hazard. Only certain types of glass, heat proof glass-ceramic, ceramic, earthenware or glazes are suitable for use in this warming drawer. Utensils that are not thermally heat safe ma
ページ7に含まれる内容の要旨
5 Features US CA Vent Holes Thermostat Control Knob Moist/ Crisp Knob Removable Stainless Steel Tray Power Indicator Power Lens Indicator Light Model and Serial tag location on inside panel Stainless Steel Drawer Fig. 01
ページ8に含まれる内容の要旨
6 US CA Installation Specifications DIMENSIONS (FRONT VIEW) DIMENSIONS (SIDE VIEW) 28-3/16" 25-1/16" POWER 23-1/2" CORD 1/2" 10-1/2" 9-3/4" 29-11/16" 1/4" Fig. 02 Fig. 03 Base Cabinet Installation The cabinet depth from the outer edge of the face frame to the inside back of the cabinet or wall should be at least 24” (see Fig. 04). The Warming Drawer should be installed into a base cabinet with minimum outside dimensions of 13-1/4” high by 30” wide by 24” deep. Power supply required: 120Vo
ページ9に含まれる内容の要旨
7 Installation US CA Wall Cabinet Installation DOUBLE Wall Oven and Warming SINGLE Wall Oven and Microwave and Drawer Installation Warming Drawer Installation microwave double cut-out wall oven cutout single wall oven cutout + 10 1/16" – 11-3/16" + 10 1/16" – 11-3/16" warming drawer warming drawer cutout** cutout** 15-3/4" 18-3/4" + 25-3/4 1/16" + – 25-3/4 1/16" – Fig.05 Fig. 06 **T he floor of the opening should be constructed of plywood strong enough to support the
ページ10に含まれる内容の要旨
8 US CA Installation STEP 1 Removing the drawer Turn the unit off. Be sure the drawer is cool and no food items or trays are in the drawer. Never attempt to remove the drawer while the unit is on or warm. 1. To remove the drawer, first remove plates, trays, etc., from the drawer. 2. Pull the drawer open towards you all the way until it reaches the stop position (Fig. 07). 3. Unlock the drawer by lifting up the tab on the left hand side (Fig. 08) and pressing down the tab on the right hand s
ページ11に含まれる内容の要旨
9 Installation US CA STEP 2 Mounting Installation of Chassis The lower rear corners of the cabinet need to provide proper support to the back of the Warming Drawer and the anti-tip mounting clips. A 120 volt AC outlet should be located no further than 36 inches from the back right corner of the Warming Drawer. The bottom rear section of the cabinet should be made of solid plywood or two 2x4 beam. It holds the anti-tip mounting clips and supports the weight of Warming Drawer, which is 9
ページ12に含まれる内容の要旨
10 US CA Installation Slot Slot 20" Center line to Center line for mounting clips Power cord Fig. 12 1-1/2” mounting screws Fig. 13
ページ13に含まれる内容の要旨
11 Installation US CA STEP 3 Replacing the drawer WARNING! With the drawer removed, the heating element is exposed. Never turn the unit on while the drawer is removed. Never let children play near or touch the warming drawer while it is not safely installed. Push the slides back into the cabinet while the drawer is removed to prevent accidents. 1. To reinstall the drawer, push the slides fully inside. 2. Position the drawer in front of the cavity and align the slides (Fig. 14).
ページ14に含まれる内容の要旨
12 US CA Operating Instructions Oper a tional guide The Warming Drawer is designed to keep previously cooked foods at a safe, warm temperature, for extended periods of time, when operated correctly. It is not designed to cook or reheat food. The Warming Drawer should be pre-heated according to the chart below prior to inserting the food to be warmed. Food may be kept up to two hours in the warming drawer. Failure to pre-heat could result in unsafe food temperatures, Fig. 17 which cou
ページ15に含まれる内容の要旨
13 Care and maintenance US CA Cleaning the warming drawer Be careful cleaning any part of this appliance, particularly the drawer box and back of the drawer face. All parts of the drawer can be cleaned with a hot soapy damp cloth, rinsed, dried and buffed with a heavy pile cloth. Always try this first, as it is the mildest cleaning procedure. Be sure the Warming Drawer is turned off and the appliance is cool before using any type of aerosol cleaner on or around the appliance. The c
ページ16に含まれる内容の要旨
14 US CA Temperature settings Suggested temperatures to keep foods hot FOOD TEMPERATURE SLIDE KNOB COVERED/ POSITION UNCOVERED Beef** Rare Low Moist Covered Medium Med Moist Covered Well Done Med Moist Covered Bacon High Crisp Uncovered Bread Dough Proofing Moist Covered Casseroles Med Moist Covered Chips High Crisp Uncovered Cooked Cereal Med Moist Covered Eggs Med Moist Covered Fish, Seafood Med Moist Covered
ページ17に含まれる内容の要旨
15 Service US CA How To Obtain Service: Before you call for service: Is the circuit breaker tripped or the fuse blown? Is there a power outage in the area? For warranty service, please contact your local service provider or Fisher & Paykel Customer Care Representative at (888) 936.7872 or go to our website at www.dcsappliances.com and choose “customer care” to find your nearest Authorized Service Center. Before you call, please have the following information ready: Model Number (
ページ18に含まれる内容の要旨
16 US CA Warranty Limit ed w arr ant y When you purchase any new Fisher & Paykel whiteware product for personal or consumer use you automatically receive a one year limited warranty covering parts and labor for servicing within the 48 mainland United States, Hawaii, Washington DC and Canada. In Alaska the limited warranty is the same except that you must pay to ship the product to the service shop or the service technician’s travel to your home. Products for use in Canada must be purchased
ページ19に含まれる内容の要旨
17 Warranty US CA This warranty does not cover: A. Service calls that are not related to any defect in the product. The cost of a service call will be charged if the problem is not found to be a defect of the product. For example: 1. Correct faulty installation of the product. 2. Instruct you how to use the product. 3. Replace house fuses, reset circuit breakers, correct house wiring or plumbing, or replace light bulbs. 4. Correct fault(s) caused by the user. 5. Change the set-up of the pr
ページ20に含まれる内容の要旨
18 US CA Warranty Commercial use If you are using the product in a commercial setting (any use other than a single family dwelling), we agree to repair or replace, without cost to you for parts only, any defective parts, the serial number of which appears on the product. Our liability for these repairs expires ONE YEAR from the date of original purchase. At our option we may replace the part or the product, or we may provide you a full refund of the purchase price of the product (not includi
