Harbor Freight Tools 9712の取扱説明書

ページ1に含まれる内容の要旨

TREE PRUNER
09712
ASSEMBLY AND OPERATING INSTRUCTIONS
Visit our Web site at http://www.harborfreight.com
© ®
Copyright 2004 by Harbor Freight Tools . All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight
Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual
product may differ slightly from the product described herein.

ページ2に含まれる内容の要旨

Safety Warnings and Precautions (continued) 1. Keep work area clean. Cluttered areas invite injuries. 2. Observe work area conditions. Do not use the Pruner in damp or wet locations. Don’t expose to rain. Keep work area well lighted. 3. Keep children away. Children must never be allowed in the work area. Do not let them handle the Pruner. 4. Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of ch

ページ3に含まれる内容の要旨

Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that com- mon sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Assembly: The only assembly required is mounting the Saw Blade (#5) to the Base (#1). Line up the tab on the blade so that it fits in the small hole on the base making sure that t

ページ4に含まれる内容の要旨

Parts List and Assembly Drawing Part No. Description Qty Part No. Description Qty 1 Base 1 15 Nylon Nut 1 2 Pruner Blade 1 16 Screw 1 3 Pole Socket 1 17 Washer 2 4 Pulling Base 1 18 Nylon Nut 1 5 Saw Blade 1 19 Mounting Bolt 1 6 Pulley Base (A) 1 20 Wing Nut 1 7 Pulley Base (B) 1 21 Screw 2 8 Pulley 2 22 Nut 2 9 Grip 1 23 Bolt 2 10 Lock Ring 1 24 Bolt 1 11 Spring 1 25 Bolt 1 12 Center Screw 1 26 Bolt 2 13 Spring Washer 1 27 Bolt 2 14 Washer 1 SKU 09712 Page 4