ページ1に含まれる内容の要旨
4222 002 48152 08-11-2006 14:32 Pagina 3
ENGLISH 4
POLSKI 19
РУССКИЙ 33
УКРАЇНСЬКА 49
EESTI 64
LATVISKI 78
LIETUVIŠKAI 93
107
ROMÂNĂ 122
ČESKY 136
MAGYAR 150
SLOVENSKY 165
HRVATSKI 179
SLOVENŠČINA 193
БЪЛГАРСКИ 208
SRPSKI 224
HQ9160
ページ2に含まれる内容の要旨
4222 002 48152 08-11-2006 14:32 Pagina 4 4 ENGLISH Important Read these instructions for use carefully before using the appliance and save them for future reference. ◗ Only use the powerplug supplied. ◗ The powerplug transforms 100-240 volts to a safe low voltage of less than 24 volts. ◗ The powerplug contains a transformer. Do not cut off the powerplug to replace it with another plug, as this will cause a hazardous situation. ◗ Do not use a damaged powerplug. ◗ If the powerplug is damaged, a
ページ3に含まれる内容の要旨
4222 002 48152 08-11-2006 14:32 Pagina 5 ENGLISH 5 Charging Make sure the appliance is switched off before you start charging it. Charging normally takes approx. 1 hour. You can also shave without charging by connecting the shaver to the mains. Charge indications Charging ◗ When you start charging the empty shaver, C the bottom light burns red.When the battery contains enough power for one shave, all lights start blinking green sequentially. Battery fully charged ◗ When the battery has been f
ページ4に含まれる内容の要旨
4222 002 48152 08-11-2006 14:32 Pagina 6 6 ENGLISH The remaining battery capacity is shown when you unplug the shaver or when you switch it on or off: - When all lights burn green, the battery is 100% charged. - When the bottom light burns green, 20% of the battery capacity is left. Battery running low ◗ When the battery is running low, the bottom C light starts burning red. When you switch the shaver off, this light blinks a few times. Cordless shaving time A fully charged shaver has a cordl
ページ5に含まれる内容の要旨
4222 002 48152 08-11-2006 14:32 Pagina 7 ENGLISH 7 Charging stand You can also charge the appliance by placing it in the charging stand, if provided. Never immerse the charging stand in water nor rinse it under the tap. ◗ Place the shaver properly in the plugged-in C charging stand. The bottom light starts burning red. ◗ Lift the shaver from the stand without tilting C it. Removing and inserting the clock 1 Turn the clock anticlockwise (1) ('click') C and pull it out (2). 2 Insert the clock (
ページ6に含まれる内容の要旨
4222 002 48152 08-11-2006 14:32 Pagina 8 8 ENGLISH Setting the time ◗ Set the time by pressing the small button at C the back of the clock. The time can only be set forward. Replacing the battery 1 Remove the cap.Then remove the battery C by means of a miniature screwdriver. 2 Insert a new battery and put the cap back C into place. Using the appliance Personal Comfort Control ◗ The Personal Comfort Control system allows C you to adapt the shaver to your skin type. - You can set the shaver to
ページ7に含まれる内容の要旨
4222 002 48152 08-11-2006 14:32 Pagina 9 ENGLISH 9 ◗ The 'S' position is best suited for sensitive C skin. ◗ The 'N' position is best suited for normal C skin. ◗ The in-between positions are suitable for skin types between normal and sensitive. Shaving 1 Switch the shaver on by pressing the on/off button once. When you switch the shaver on or off, all lights and symbols go on and then the remaining battery capacity is shown for a few seconds. 2 Move the shaving heads quickly over your C skin,
ページ8に含まれる内容の要旨
4222 002 48152 08-11-2006 14:32 Pagina 10 10 ENGLISH Trimming For grooming sideburns and moustache. 1 Open the trimmer by pushing the slide C downwards. The trimmer can be activated while the motor is running. 2 Close the trimmer with your index finger. C Cleaning and maintenance ◗ The tap symbol starts blinking after every C shave to remind you that the shaver needs to be cleaned (except when the bottom light burns red). Regular cleaning guarantees better shaving performance. ◗ If provided,
ページ9に含まれる内容の要旨
4222 002 48152 08-11-2006 14:32 Pagina 11 ENGLISH 11 Be careful with hot water.Always check if the water is not too hot, to prevent your hands from getting burnt. Every day: shaving unit and hair chamber 1 Switch the shaver off, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. 2 Press the release button to open the C shaving unit. 3 Clean the shaving unit and the hair C chamber by rinsing them under a hot tap for some time. Make sure the inside of the s
ページ10に含まれる内容の要旨
4222 002 48152 08-11-2006 14:32 Pagina 12 12 ENGLISH Every six months: shaving heads 1 Open the shaving unit, turn the lock C anticlockwise (1) and remove the retaining frame (2). 2 Clean the cutters and guards with the brush supplied. Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally mix up the cutters and guards, it may take several weeks before optimal shaving performance is restored. 3 Put the shaving heads back into the shaving u
ページ11に含まれる内容の要旨
4222 002 48152 08-11-2006 14:32 Pagina 13 ENGLISH 13 3 Lubricate the trimmer teeth with a drop C of sewing machine oil every six months. Charging stand You can clean the charging stand with a moist cloth. Storage ◗ Put the protection cap on the shaver to C prevent damage. ◗ Store the appliance in the luxury pouch or C place the appliance in the stand to dry. Replacement ◗ Replace the shaving heads as soon as the C shaving unit symbol starts blinking. Replace damaged or worn shaving heads with
ページ12に含まれる内容の要旨
4222 002 48152 08-11-2006 14:32 Pagina 14 14 ENGLISH 1 Switch the shaver off, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. 2 Press the release button to open the C shaving unit. 3 Turn the lock anticlockwise (1) and C remove the retaining frame (2). 4 Remove the shaving heads and place new C ones in the shaving unit. Make sure that the projections of the shaving heads fit exactly into the recesses. 5 Put the retaining frame back into the C shaving u
ページ13に含まれる内容の要旨
4222 002 48152 08-11-2006 14:32 Pagina 15 ENGLISH 15 Accessories The following accessories are available: - HQ8500/HQ8000 powerplug. - HQ9 Philips shaving heads. - HQ110 Philips shaving head cleaner (shaving head cleaning spray). - HQ8010 car cord. Environment ◗ Do not throw the appliance away with the C normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this you will help to preserve the environment. ◗ Charging stand Do not
ページ14に含まれる内容の要旨
4222 002 48152 08-11-2006 14:32 Pagina 16 16 ENGLISH Only remove the battery if it is completely empty. 1 Remove the powerplug from the wall socket and pull the appliance plug out of the shaver. 2 Let the shaver run until it stops, undo the C screws and open the shaver. 3 Remove the battery. Do not connect the shaver to the mains again after the battery has been removed. Guarantee & service If you need information or if you have a problem, please visit the Philips website at www.philips.com o
ページ15に含まれる内容の要旨
4222 002 48152 08-11-2006 14:32 Pagina 17 ENGLISH 17 ◗ Clean the shaver thoroughly before you continue shaving. See chapter 'Cleaning and maintenance'. B Cause 2: long hairs are obstructing the shaving heads. ◗ Clean the cutters and guards with the brush supplied. See chapter 'Cleaning and maintenance', section 'Every six months: shaving heads'. B Cause 3: the shaving heads are damaged or worn. ◗ Replace the shaving heads. See chapter 'Replacement'. 2 The shaver does not work when the on/off
ページ16に含まれる内容の要旨
4222 002 48152 08-11-2006 14:32 Pagina 18 18 ENGLISH B Cause: the shaving unit has not been placed correctly. ◗ If the shaving unit becomes detached from the shaver, you can easily reattach it ('click').
ページ17に含まれる内容の要旨
4222 002 48152 08-11-2006 14:32 Pagina 19 POLSKI 19 Ważne Przed pierwszym użyciem urządzenia zapoznaj się dokładnie z instrukcją jego obsługi i zachowaj ją na przyszłość, do ewentualnej konsultacji. ◗ W celu naładowania akumulatorów używaj wyłącznie załączonej do urządzenia ładowarki. ◗ Zasilacz przekształca napięcie 100-240 V na bezpieczne niskie napięcie niższe niż 24 V. ◗ Wtyczka zasilacza zawiera transformator. Odcięcie wtyczki celem wymiany jej na nową może spowodować niebezpieczeństwo.
ページ18に含まれる内容の要旨
4222 002 48152 08-11-2006 14:32 Pagina 20 20 POLSKI Ładowanie Przed rozpoczęciem ładowania należy sprawdzić, czy urządzenie jest wyłączone. Normalne ładowanie trwa ok. 1 godziny. Możesz także używać golarki bez ładowania, podłączając ją bezpośrednio do sieci. Wskaźniki ładowania Ładowanie ◗ W momencie rozpoczęcia ładowania golarki C zaświeci się w kolorze czerwonym lampka umieszczona w jej dolnej części. Gdy akumulator dysponuje pojemnością wystarczającą tylko na jedno golenie, zaczynają kole
ページ19に含まれる内容の要旨
4222 002 48152 08-11-2006 14:32 Pagina 21 POLSKI 21 Pozostała pojemność akumulatora ◗ Liczba świecących się lampek wskazuje na C ilość zmagazynowanej w akumulatorze energii. Pozostała pojemność akumulatora wyświetlana jest po wyjęciu z gniazdka wtyczki lub po wyłączeniu golarki. - Gdy wszystkie lampki świecą się w kolorze zielonym, akumulator jest naładowany w 100%. - Gdy dolna lampka świeci się w kolorze zielonym, oznacza to, że pozostało 20% pojemności akumulatora. Akumulatory wyczerpują si
ページ20に含まれる内容の要旨
4222 002 48152 08-11-2006 14:32 Pagina 22 22 POLSKI 3 Gdy akumulator jest całkowicie naładowany wyjmij wtyczkę z gniazdka sieciowego i odłącz urządzenie. Podstawka ładująca Urządzenie można naładować również, umieszczając je w podstawce ładującej, jeśli jest ona dołączona do kompletu. Nigdy nie zanurzaj podstawki ładującej w wodzie ani nie spłukuj jej pod kranem. ◗ Umieść prawidłowo golarkę w podłączonej do C sieci elektrycznej podstawce ładującej. Dolna lampka zaczyna świecić się w kolorze c
