ページ1に含まれる内容の要旨
care and operation
instructions
™
DIRECT VENT MERIT
LMDV-33/35/40 SERIES
WarninGs
direct -Vent Gas Firep Lace Heaters
• Hot! do not touch! t he glass and
surfaces of this appliance will be hot
p/n 875,028M reV. e 02/2008
during operation and will retain heat
for a while after shutting off the appli-
MODELS
ance. severe burns may result.
• carefully supervise children in the
Millivolt Models Electronic Models
same room as appliance.
LMdVt -3328cnM LMdV-3530cnM
LMdVt -3328cne
• if
ページ2に含まれる内容の要旨
t hese appliances are designed to operate on natural conGratuLations! gas or propane gas only. t he use of other fuels or combination of fuels will degrade the performance In selecting this LENNOX Direct-Vent Gas Appliance you have chosen the finest and most of this system and may be dangerous. dependable fireplace to be found anywhere. Its a beautiful, prestigious alternative to a wood burning fireplace. Welcome to a Family of tens of thousands of sat
ページ3に含まれる内容の要旨
Gas pressure - At the time of installation, it must be determined Gas c ontrols/c ontrol c ompartment Tables 4, 5 and 6 show the appliances' gas access if the appliance needs to be derated. Contact pressure requirements. your local gas supplier for deration requirements The gas controls can be found behind the control foryour area. compartment access door. inlet Gas supply pressure (all models) deration - At higher elevations, the amount of removing control compartm
ページ4に含まれる内容の要旨
I O O L I P T O IGNITER it OFF ON CONTROL TPTH TP TH L I I P H F F L F F O Millivolt appliances - Appliances with electronic appliances - If your electronic appliance is equipped with an Millivolt systems will be fitted with the gas optional remote wall switch or remote control kit To light electronic appliances refer to the detailed the appliance main burner may be turned on and controlvalve shown in Figures 4 or 5. lighting instructions found on Pages 20
ページ5に含まれる内容の要旨
If the venting system is disassembled for any 3. Keep the lower control compartment clean clean Logs and Burner reason, a qualified service technician should by vacuuming or brushing at least twice a Carefully remove the logs (use care when han- followvent installation instructions for proper year. More frequent cleaning may be required dling the fiber logs, as they become quite fragile reassembly and proper sealing of the venting
ページ6に含まれる内容の要旨
These are direct-vent appliances. They are r emoving Glass enclosure panels Front Glass enclosure panel, removal designed to operate only when the front glass (see Figure 6) and installation enclosure panel is installed. Generally the front glass enclosure panel should not be removed 1. Remove the top louver assembly by pulling except to gain access to the components within it up and out. WarninG the firebox, and the appliance may only
ページ7に含まれる内容の要旨
1. Place the rear log (A) as shown. Position the insta LL Ver Micu Lite , Vo Lcanic 2 notches on the bottom of the log over the WarninG stone, GLoWinG eMBers and LoGs 2 corresponding locating brackets against the backwall of firebox. t he size and position of the log 1. Remove the front glass enclosure panel 2. Place the left log (B) as shown. The notch (see Removing Glass Enclosure Panels on set was engineered to give the on the bottom of the
ページ8に含まれる内容の要旨
ModeL LMdV-3328 & LMdV-3530 Log placement instructions a LoG set catalog number H3366 * item description a Log, rear B Log, Left c Log, Left center d Log, right center e Log, right d * Item "letters" above correspond to photos B c e install the embers, Vermiculite, Volcanic stone and Logs in the order shown here (1 through 6) and per the instructions on Page 7. DO NOT PLACE EMBERS OVER GAS SLOTS 1 4 Embers Hole on bot- tom of log (E) a fits over pin Volcanic on log (A). Stone V-Shape are
ページ9に含まれる内容の要旨
ModeL LMdV-4035 Log placement instructions LoG set a catalog number H3365 * item description a Log, rear B Log, Left c Log, center c d Log, center Front B e Log, right e * Item "letters" above correspond to photos d install the embers, Vermiculite, Volcanic stone and Logs in the order shown here (1 through 6) and per the instructions on Page 7. 1 DO NOT PLACE EMBERS OVER GAS SLOTS 4 Embers Volcanic Stone Vermiculite B Notch on log bottom Place log over pins 2 fits over bracket c 5 Pin Pin
ページ10に含まれる内容の要旨
Burner adJustMents (QuaLiFied tecHnicians onLY) Flame appearance and sooting Proper flame appearance is a flame which is blue at the base and becomes yellowish-orange in the body of the flame. When the appliance is first lit, the entire flame may be blue and will gradually turn yellowish-orange during the first 15 minutes of operation. If after a short period the flame stays lowered blue, or if the flame is orange with evidence of
ページ11に含まれる内容の要旨
electronic appliance checkout sit MiLLiVoLt piLot asse MBLY caution proper pilot Flame appearance To light the burner, refer to the lighting instruc- igniter r od Hood carbon will be produced if the air tions on Pages 20 & 21. Ensure the igniter lights the pilot. The pilot flame should engulf shutter is closed too much. any the flame sensoras shown in Figure 15. damage due to carboning result- t hermocouple 3/8" Min. ing from improperly setting the (9 mm)
ページ12に含まれる内容の要旨
TH TH TP TP WirinG diaGraMs Plug blower Wiring diagrams are provided here for refer- Green into this White Ground - Green ence purposes only. This information is also receptacle Neutral - White provided on schematics attached directly to the 120 VAC - Black Black appliance on a pullout panel located within the Junction Box Blower controlcompartment. * Wall-mounted ON/ OFF Blower Ground Tab Switch or Variable Broken caution Tab Intact Speed Control Sw
ページ13に含まれる内容の要旨
accessor Y coMponents product reference information Cat. Model Ship. Ship. No. Weight Volumn H3313 LMdVt-3328cn M 95 lb. 13.08 cu. ft. H3314 LMdVt-3328cpM 95 lb. 13.08 cu. ft. H3315 LMdVr -3328cn M 95 lb. 13.08 cu. ft. H3316 LMdVr -3328cpM 95 lb. 13.08 cu. ft. H3317 LMdVt -3328cne 95 lb. 13.08 cu. ft. H3318 LMdVr-3328cne 95 lb. 13.08 cu. ft. H3319 LMdV-3530cnM 113 lb. 15.75 cu. ft. H3320 LMdV-3530cpM 113 lb. 15.75 cu. ft. H3321 LMdV-3530cne 113 lb. 15.75 cu. ft. standard remote control system de
ページ14に含まれる内容の要旨
accessor Y coMponents style View™ doors - arch design Kits cat. no. Model Model Model series Arch Design H0858 ad35c 35” arch doors, charcoal H0859 ad35ti 35” arch doors, t extured iron LMdV-3530 H0860 ad35sp 35” arch doors, satin pewter H0861 ad35aB 35” arch doors, antique Brass H0862 ad40c 40” arch doors, charcoal H0863 ad40ti 40” arch doors, t extured iron LMdV-4035 H0864 ad40sp 40” arch doors, satin pewter H0865 ad40aB 40” arch doors, antique Brass style View doors - arch pane design Kits H
ページ15に含まれる内容の要旨
accessor Y coMponents Forced air Blower Kits White Wall switch Kit cat. Model no. description cat. no. Model no. description no. 85L87 FWsK oFF/on Wall switch Kit 80L84 FBK-100 Blower, standard (single speed) 4 piece t rim Kit 80L85 FBK-200 Blower, Variable speed oFF/on Wall switch Kit (w/wall-mounted switch) cat. no. Model no. description The OFF/ON wall switch kit may be used to control 80L86 FBK-250 Blower, Variable speed the operation of the fireplace burner. Install the
ページ16に含まれる内容の要旨
P A accessor Y coMponents * assembled 8-piece Louver Kits polished Brass Brushed stainless Models Where used cat. # Model cat. # Model H1522 LK-400B H1523 LK-400Bs LMdVt -3328 I LMdVr-3328 H1524 LK-500B H1525 LK-500Bs LMdV-3530 LMdV-4035 H1526 LK-600B H1527 LK-600Bs (ref.Form # 750,166M) t ouch-up paint Kit * Lennox Nameplate Logo, 12L15, is sold separately. Repair of minor scratches and discoloration of the appliance charcoal painted surfaces may be accom- polished Brass &
ページ17に含まれる内容の要旨
Note: Door & Trim Kits are for 1 side only. If set is desired, order 2 kits. accessor Y coMponents Sunrise Style (upper grille shown) Crescent Style (lower grille shown) Cat. No.# Model Description Model Series H3565 su GK35c 35” charcoal t all style View doors - H3567 su GK35sp 35” satin pewter upper GriLLe Kits These decorative screen doors are offered in four H3573 su GK40c 40” charcoal sunrise attractive finishes and fit on the face of the appliance H3575 su GK40sp 40” sa
ページ18に含まれる内容の要旨
I O O L I P T O it TPTH TP TH L I P I F F L H F F O LiGHtinG instructions – HoneYWeLL and sit MiLLiVoL t Gas V aLVe For Your saFetY read BeFore LiGHtinG WarninG: iF You do not FoLLoW tHese instructions eXactLY, a Fire or eXpLosion MaY resuL t causinG propertY daMaGe, personaL inJur Y or Loss oF LiFe. a. This appliance hasa pilot which mustbe lighted with apiezo • do not use any phone in your building. igniter. When lightingthe pilot, follow these instructions • immediately cal
ページ19に含まれる内容の要旨
I O O L I P T O it TPTH TP TH L I P I F F L H F F O INSTRUCTIONS D’ALLUMAGE – VANNE GAZ MILLIVOLT HONEYWELL ET SIT POUR VOTRE SÉCURITÉ, LISEZ CES INSTRUCTIONS AVANT L’ALLUMAGE AVERTISSEMENT : SI VOUS NE SUIVEZ PAS CES INSTRUCTIONS À LA LETTRE, IL POURRAIT S’EN SUIVRE UN INCENDIE OU UNE EXPLOSION CAUSANT DES DOMMAGES MATÉRIELS, DES BLESSURES CORPORELLES OU MÊME DES PERTES DE VIE. A. Cet appareil est muni d’une veilleuse qui doit être allumée avec un • Appelez immédiatement votre compagnie de gaz
ページ20に含まれる内容の要旨
IGNITER OFF ON CONTROL LiGHtinG instructions — eLectronic For Your saFetY read BeFore LiGHtinG WarninG: iF You do not FoLLoW tHese instructions eXactLY, a Fire or eXpLosion MaY resuL t causinG propertY daMaGe, personaL inJur Y or Loss oF LiFe. a. When lighting the appliance, followthese instructions • Immediately call your gas supplier from a neighbor’s exactly. phone. • If your gas supplier cannot be reached, call the fire B. BEFOREOPERA TING smell all aroundthe app
