ページ1に含まれる内容の要旨
OPERATION AND PARTS MANUAL
Vibratory
Walk-Behind Roller
Model
MDR-9GH
(Honda Gasoline)
Revision #0 (12/17/03)
. .
MULTIQUIP INC. . . PARTS DEPARTMENT:
18910 WILMINGTON AVE. 800-427-1244
CARSON, CALIFORNIA 90746 FAX: 800-672-7877
310-537-3700 SERVICE DEPARTMENT/TECHNICAL ASSISTANCE:
800-421-1244 800-478-1244
FAX: 310-537-3927 FAX: 310-631-5032
E-mail:mq@multiquip.com � www:multiquip.com
Atlanta • Boise Dallas Houston Newark
Montreal, Canada Manchester, UK
Rio De Janier
ページ2に含まれる内容の要旨
PAGE 2 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #0 (12/17/03)
ページ3に含まれる内容の要旨
HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING MULTIQUIP’S MAIN PHONE NUMBERS 800-421-1244 FAX: 310-537-3927 310-537-3700 PARTS DEPARTMENT 800-427-1244 FAX: 800-672-7877 310-537-3700 FAX: 310-637-3284 MA YCO PARTS 800-306-2926 FAX: 800-672-7877 310-537-3700 FAX: 310-637-3284 SERVICE DEP ARTMENT 800-478-1244 FAX: 310-537-4259 310-537-3700 MQ POWER SERVICE DEPARTMENT 800-835-2551 FAX: 310-638-8046 310-537-3700 TECHNICAL ASSIST ANCE 800-478-1244 FAX: 310-631-503
ページ4に含まれる内容の要旨
TABLE OF CONTENTS MIKASA MDR-9GH- HONDA GX340K1QAE2 VIBRATORY ROLLER ENGINE Proposition 65 Warning ............................................. 2 Air Cleaner Assembly......................................... 68-69 Here's How To Get Help ............................................ 3 Camshaft Assembly ........................................... 70-71 Table Of Contents ..................................................... 4 Carburetor Assembly ......................................... 72-73 Parts
ページ5に含まれる内容の要旨
PARTS ORDERING PROCEDURES When ordering parts, please supply the following information: ❒ ❒❒❒ ❒ Dealer account number ❒ ❒❒❒ ❒ Dealer name and address ❒ ❒❒❒ ❒ Shipping address (if different than billing address) ❒ ❒❒❒ ❒ Return fax number ❒ ❒❒❒ ❒ Applicable model number ❒ ❒❒❒ ❒ Quantity, part number and description of each part ❒❒ ❒❒❒ Specify preferred method of shipment: Note: Unless otherwise indicated by customer, all ✓ FedEx or UPS Ground orders are treated as “Standard Orders”, and will ✓ Fed
ページ6に含まれる内容の要旨
MDR-9GH —SPECIFICATIONS TR able 1.MS DR-9GH VIBRATORY ROLLE SPECIFICATION Centrifugal Force 6,600 lbs. (3,000 kg) Vm ibration Frequency 3,000 vp Traveling Speed (forward and reverse) 0 to 1.8 mph (0 to 3 km/hr) G° rade Ability 25 Diameter x Width of Roller 18 x 27.6 in (457 x 700 cm) Wheel Base 22.4 in (570 mm) Side Road Clearance 10.8 in (274 mm) Length (with Handle) 111.8 in (2,840 mm) Width 31.3 in (795 mm ) Height 44.1 in (1,120 mm ) Total Weight 1,940 lbs. (880 kg) Wm orking Input Revolutio
ページ7に含まれる内容の要旨
MDR-9GH — DIMENSIONS Figure 2. MDR-9GH Vibratory Roller Dimensions TABLE 3. ROLLER DIMENSIONS RS EF.D. IMENSIONRS EF DIMENSION A)1F 11.8 in. (2.8 meters 22.4 in. (.57 meters) B)8G 8 in. (2.23 meters 18 in. (.457 meters) C) 46 in. (1.17 meters H 15.5 in. (.382 meters) D) 45.9 in. (1.16 meters I 5.4 in. (.137 meters) E) 11 in. (.279 meters MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #0 (12/17/03) — PAGE 7
ページ8に含まれる内容の要旨
MDR-9GH — SAFETY MESSAGE ALERT SYMBOLS HAZARD SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in L Lethal Exhaust Gases injury to yourself and others. This Owner's Manual has Engine exhaust gases contain poisonous been developed to provide carbon monoxide. This gas is colorless and complete instructions for odorless, and
ページ9に含まれる内容の要旨
MDR-9GH — SAFETY MESSAGE ALERT SYMBOLS Accidental Starting Respiratory Hazard ALWAYS place the engine ON/OFF switch in the OFF position, when the vibration roller is ALWAYS wear approved respiratory not in use. protection. Equipment Damage Messages Sight and Hearing hazard Other important messages are provided throughout this manual to help prevent damage to your vibration roller, other property, or the surrounding environment. ALWAYS wear approved eye and hearing protection. This vibratory rol
ページ10に含まれる内容の要旨
MDR-9GH — RULES FOR SAFE OPERATION CAUTION: Failure to follow instructions in this manual ■ NEVER touch the hot exhaust manifold, may lead to serious injury or even death! This muffler or cylinder. Allow these parts to equipment is to be operated by trained and cool before servicing engine or vibratory qualified personnel only! This equipment is roller. for industrial use only. The following safety guidelines should always be used when ■ High Temperatures – Allow the engine to cool before adding
ページ11に含まれる内容の要旨
MDR-9GH — RULES FOR SAFE OPERATION ■ NEVER disconnect any "emergency or safety devices". ■ ALWAYS know the location of the nearest and first aid kit. These devices are intended for operator safety. Disconnection of these devices can cause severe injury, bodily harm or even death! Disconnection of any of these devices will void all warranties. Loading and Unloading (Crane) ■ Before lifting, make sure that machine parts (hook and ■ In emergencies always know the location of the vibration insul
ページ12に含まれる内容の要旨
MDR-9GH — OPERATION AND SAFETY DECALS Figure 1 displays the operation and safety decals as they appear on the vibratory roller. Should any of these decals become damaged or unreadable, contact the Multiquip Parts Department for a replacement set. Figure 1. Operation and Safety Decals PAGE 12 — MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #0 (12/17/03)
ページ13に含まれる内容の要旨
NOTE PAGE MQ-MIKASA MDR-9GH VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #0 (12/17/03) — PAGE 13
ページ14に含まれる内容の要旨
MDR-9GH — GENERAL INFORMATION The Mikasa Model MDR-9GH is a powerful compacting tool FREQUENCY/SPEED capable of applying a tremendous force in consecutive impacts The vibrating roller maximum frequency is 3000 vpm (vibrations to a soil surface. With 28-inch drums and 32 inches overall width, per minute). The forward and reverse travel speed of the vibratory virtually any asphalt or mixed granular soil compaction job is roller is approximately 1.8 mph (3 km/hour). quickly cut down to size. ENG
ページ15に含まれる内容の要旨
MDR-9GH — GENERAL INFORMATION CAUTION : Tipping (Rollovers) NEVER! stand under, or get onto the roller NEVER! operate the roller on side slopes (Figure 5). The while it is being lifted or moved. possibility exist that the roller could tip over (roll over), thus causing bodily harm even death and serious damage to the equipment. CAUTION : ONLY! use steel ropes or chains that are capable of lifting at least 1,940 lbs. (880 kg ). CAUTION : NEVER! use any other part of the roller for lifting purpo
ページ16に含まれる内容の要旨
MDR-9GH — VIBRATORY ROLLER COMPONENTS Figure 6. MDR-9GH Vibratory Roller Components Figure 6 illustrates the location of the major components 7. Engine – This vibratory roller uses a HONDA for the MDR-9GH Vibratory Roller. The function of each GX340KQAE2 gasoline engine. Refer to the owner’s component is described below: manual for engine information and related topics. 1. Handle Bar – When operating the roller, this handle is to 8. Vibrator Lever (on the body of machine) – Turns the be in
ページ17に含まれる内容の要旨
MDR-9GH — ENGINE COMPONENTS Figure 7. HONDA GX340KQAE2 Engine Components 6. Choke Lever – Used in the starting of a cold engine, or in INITIAL SERVICING cold weather conditions. The choke enriches the fuel The engine (Figure 7) must be checked for proper lubrication and mixture. filled with fuel prior to operation. Refer to the manufacturers engine 7. Air Cleaner – Prevents dirt and other debris from entering manual for instructions & details of operation and servicing. The the fuel system.
ページ18に含まれる内容の要旨
MDR-9GH — INSPECTION 3. If the oil level is low, fill to the edge of the oil filler CAUTION : hole with the recommended oil type (Table 4). Never operate the vibratory Maximum oil capacity is 1.6 quarts (1.1 liters). roller in a confined area or enclosed structure that does not provide ample TABLE 4. OIL TYPE free flow of air. Season Temperature Oil Type ALWAYS wear approved eye and hearing Summer 25°C or Higher SAE 10W-30 protection before operating the vibratory roller. Spring/Fall 25°C~10°C
ページ19に含まれる内容の要旨
MDR-9GH — INSPECTION CHECKING THE CLUTCH BOX OIL LEVEL CHECKING HYDRAULIC SYSTEM 1. Check clutch box for any oil leakage. 1. Check the oil tank level gauge (Figure 10). Oil level should be at the middle indication of the gauge or 2. Remove the level plug and check oil level (Figure 12). higher. Fill as required 3. Add oil if necessary. 2. Check the surroundings of the oil tank, hydraulic pump and motor for oil leakage. Figure 12. Clutch Box Oil Level Check Figure 10. Hydraulic System Oil L
ページ20に含まれる内容の要旨
MDR-9GH — INSPECTION/START-UP POSITIONING THE HANDLE BAR CHECKING WATER TANK 1. Release the handle bar release pin (Figure 15) and position 1. Check the water tank to see if filled. Add water if necessary. the handle bar to the lowered position before starting The water tank has a capacity of approximately 6 gallons operation. (23 liters) (Figure 14). 2. When machine is not in use, release the handle bar release pin and position the handle bar to the upright position. Figure 14. Water Tank C
