Sunrise Medical Guardian Tilt Automatic Overbed Table IC-6418の取扱説明書

ページ1に含まれる内容の要旨

Washers
®
Guardian Tilt Automatic Overbed Table
User Instructions
Model IC-6418
POSSIBLE DAMAGE OR INJURY. Be alert of hi/lo adjustment of overbed table
when raising bed.
ASSEMBLY INSTRUCTIONS (FIGURE 1)
1. Using the hex bolts and washers, attach the base to the post. Tighten the bolts
securely.
2. Insert the tilt control bar into the post by loosening post screw. Tighten post
screw, once tilt control bar has been inserted into post.
3. Attach the outer tube to the top board using the screws.
4.

ページ2に含まれる内容の要旨

OPERATING INSTRUCTIONS (FIGURE 2) 1. Remove fix screw located on the table post to release the inner tube and outer tube of the post. CAUTION– Stabilize the top board as you remove the fix screw so that top board will not bounce back too quickly. 2. To raise the top board, place your hand underneath the top board and move it upward to the desired height. Remove pressure to set height. 3. To lower the top board, lift the adjustable plate and push top board downward to the desired height. To set t