ページ1に含まれる内容の要旨
501974402003_UK 8-10-2007 13:47 Pagina 1
KSCX 3610
Instructions for use
ページ2に含まれる内容の要旨
501974402003_UK 8-10-2007 13:47 Pagina 2
ページ3に含まれる内容の要旨
501974402003_UK 8-10-2007 13:47 Pagina 3 1 Product description 4 2 Important notes 8 Important information for the correct disposal of the product in accordance with EC directive 2002/96/EC 8 Building-in 9 3 Before first use 11 4 Using for the first time 12 5 Preparing coffee (using coffee beans) 13 6 Changing the quantity of coffee in the cup 15 7 Regulating the coffee mill 15 8 Preparing espresso coffee using ground coffee (instead of beans) 16 9 Hot water delivery 17 10 Preparing cappucci
ページ4に含まれる内容の要旨
501974402003_UK 8-10-2007 13:47 Pagina 4 1 Product description B C I Q L D V N O G E F H P A. Main ON/OFF switch B. Lights K C. Steam spout J D. Water tank (removable) T E. Cup tray S F. Drip tray (removable) G. Service door R H. Coffee spout (adjustable in height) I. Control panel J. Bean container lid U K. Central ground coffee lid L. Infuser M. Power cable N. Cappuccino maker (removable) O. Cappuccino maker nozzle (removable) M P. Measure for pre-ground coffee Q. Coffee grounds container (
ページ5に含まれる内容の要旨
501974402003_UK 8-10-2007 13:47 Pagina 5 1 Product description 123 4 567 8 91011 12 13 14 15 16 5
ページ6に含まれる内容の要旨
501974402003_UK 8-10-2007 13:47 Pagina 6 1 Product description 17 18 19 20 21 22 23 24 25 26 27 6
ページ7に含まれる内容の要旨
501974402003_UK 8-10-2007 13:47 Pagina 7 1 Product description Control Panel 8. Button to select hot water or OK to confirm 1. Display 9. Button to rinse the appliance or, if the MENU 2. Appliance ON/OFF knob light is on, to change the menu parameters 3. Coffee taste selection button 10. Button to activate or deactivate menu 4. One or two cups short coffee button parameter setting mode (MENU) 5. One or two cups standard coffee button 11. MENU light 6. One or two cups long coffee button 12. St
ページ8に含まれる内容の要旨
501974402003_UK 8-10-2007 13:47 Pagina 8 2 Important notes READ THESE INSTRUCTIONS CAREFULLY AND • In the event of failure or malfunction, unplug the KEEP FOR FUTURE CONSULTATION! appliance from the mains and do not tamper • This appliance is designed to "make espresso with it in any way. If it requires repair, contact coffee" and "heat drinks". Use with care to avoid an authorised service centre only and ask for scalds from the water and steam jets or through original spare parts to be used.
ページ9に含まれる内容の要旨
560 595 527 501974402003_UK 8-10-2007 13:47 Pagina 9 Building-in Please check the minimum measures (mm) necessary to the proper installation of the appliance. The coffee maker must be installed in a column unit, which must in turn be securely fixed to the wall with standard brackets. Fasten metal strip using the two screws. 80 Min. ATTENTION: • Important: the appliance should be disconnected from the mains during installation or maintenance work. • The kitchen units coming into direct contact
ページ10に含まれる内容の要旨
501974402003_UK 8-10-2007 13:47 Pagina 10 Building-in 1 2 16 Lean the bars to the surface of the furniture. Fix the bars with the screws provided; then completely extract the two bars. In case of installation above a "warmer drawer", use the top of the latter as a reference for the coffee maker runners. In this case, there will be no support surface. Put the appliance on its housing and fasten it with the screws. 3 4 110 Fix the power cord with the special clip, to avoid the cord entangling
ページ11に含まれる内容の要旨
501974402003_UK 8-10-2007 13:47 Pagina 11 3 Before first use • After removing the packaging, make sure the • You should personalise water hardness as soon product is complete and undamaged. If in as possible following the instructions in doubt, do not use the appliance and contact a paragraph 12.6. qualified professional. • The appliance's DATA PLATE is positioned on • Installation must be carried out by a qualified the side of the coffee maker so that it remains techncian and in compliance w
ページ12に含まれる内容の要旨
501974402003_UK 8-10-2007 13:47 Pagina 12 4 Using for the first time The first time you turn on the appliance and every time that it is plugged in, when you turn the main ON/OFF knob clockwise (A), the appliance makes a SELF-DIAGNOSIS operation and then turns itself off. To turn it on again, rotate the ON/OFF knob (2) clockwise on the control panel. 1. The first time you use the appliance, select the language. Press the main ON/OFF switch on the rear side of the appliance; the lights on the f
ページ13に含まれる内容の要旨
501974402003_UK 8-10-2007 13:47 Pagina 13 5 Preparing coffee (using coffee beans) 1. The appliance is preset to make coffee with a standard strength. ‘You can also choose coffee with different strengths. To choose the required strength, press the button (fig.5): and the selected coffee strength will be displayed. 2. Place 1 cup under the spouts to make 1 coffee (fig. 6) or 2 cups for 2 coffees (fig. 7). For a creamier coffee, lower the spouts to bring them as close to the cups as possible (fi
ページ14に含まれる内容の要旨
501974402003_UK 8-10-2007 13:47 Pagina 14 5 Preparing coffee (using coffee beans) NOTE 6: when the appliance displays: FILL TANK the water tank must be refilled or the appliance will not make coffee. (It is normal for there to be a little water left in the tank when the message is displayed). NOTE 7: the appliance counts the number of coffees made. Every 14 single coffees (or 7 doubles) the appliance displays: EMPTY GROUNDS CONTAINER indicating that the grounds container is full and must be e
ページ15に含まれる内容の要旨
501974402003_UK 8-10-2007 13:47 Pagina 15 6 Changing the quantity of coffee in the cup The appliance is factory preset to automatically deliver the following quantities of coffee: - short (when the button is pressed); - standard (when the button is pressed); - long (when the button is pressed); To change these quantities, proceed as follows: - press the button corresponding to the quantity you want to change ( , or ) for at least 8 seconds until the message "PROGRAM QUANTITY" is displayed; -
ページ16に含まれる内容の要旨
501974402003_UK 8-10-2007 13:47 Pagina 16 8 Preparing espresso coffee using ground coffee (instead of beans) • Press the (fig. 14) button to select the ground coffee function. This disables the coffee mill function. The appliance displays READY PRE-GROUND • Extract the appliance by pulling it using the special handles (fig. 3). • Lift the central lid, place one level measure of ground coffee in the funnel (see fig. 15). Close the lid, push the appliance to replace it and proceed as described
ページ17に含まれる内容の要旨
501974402003_UK 8-10-2007 13:48 Pagina 17 9 Hot water delivery • Always make sure the appliance is ready. • Turn the cappuccino maker towards the outside of the appliance and place a container under it (fig. 2). • Press the (fig. 17). The appliance displays: HOT WATER PRESS OK • Press the / button again (fig. 17) for hot water. • Hot water runs off from the cappuccino maker and starts to fill the container underneath. You should not run off hot water for more than 2 minutes at a time.To inter
ページ18に含まれる内容の要旨
501974402003_UK 8-10-2007 13:48 Pagina 18 10 Preparing cappuccinos (using steam) • Press the steam button. • Wait a couple of minutes for the cappuccino maker to cool down then with one hand hold the cappuccino spout handle firm and with the other unscrew the cappuccino maker itself by rotating clockwise and extracting downwards (fig. 20). • Remove the nozzle from the steam spout by pulling it downwards (fig. 21). • Carefully wash the cappuccino maker and steam nozzle in warm water. • Make su
ページ19に含まれる内容の要旨
501974402003_UK 8-10-2007 13:48 Pagina 19 11 Cleaning and maintenance • Wash the infuser under running water, without using detergents. Never wash the infuser in the dishwasher; • clean the inside of the appliance thoroughly. To remove coffee encrustations from the inside of the appliance, scrape with a plastic or wooden fork (fig. 25) then vacuum up the residues with a vacuum cleaner (fig. 26); • replace the infuser by sliding it onto the supports and pin at the bottom, then push the PUSH sy
ページ20に含まれる内容の要旨
501974402003_UK 8-10-2007 13:48 Pagina 20 12 Changing and setting the menu parameters The following menu parameters and functions can be changed by the user: • Clock • Auto-start time • Descaling process • Coffee temperature • Length of time the appliance remains on • Water hardness Factory default values 12.1 Setting the clock To set the clock, proceed as follows: • Press the (the light over the button comes on) then press the button repeatedly until the appliance displays CLOCK 00:00 • Pres
