ページ1に含まれる内容の要旨
KS-124
24-Port 10/100 Workgroup Switch
User’s Guide
DOC.070524-KS124
ページ2に含まれる内容の要旨
1. Introduction The 10BASE-T/100BASE-TX Switches which are high-performance Fast Ethernet switches designed for the network core. It provides 24 10BASE-T/100BASE-TX ports that can significantly improve the performance of your network’s backbone, and deliver the throughput needed to support a broad range of advanced network applications. With Fast Ethernet Switches high performance bandwidth, it provides the quickest solution to meeting the growing demands on your network’s limited resou
ページ3に含まれる内容の要旨
Runt and CRC Filtering eliminates erroneous packets to optimize the network bandwidth. Support to handle up to 1522 bytes packet. LED indicators for simple diagnostics and management. Internal switching power supply. Plug and Play. 3. Package Contents Rackmount Kit. User guide. Power cord. 10/100Mbps Fast Ethernet Switch 4. Hardware Introduction 4.1 Front Panel The unit front panel provides a simple interface monitoring the Switch. See the chart in section 4.2 f
ページ4に含まれる内容の要旨
4.3 Rear Panel The rear panel of the 24-port Fast Ethernet Switch indicates an AC inlet, which accepts 100-240VAC 50-60Hz power input. Specifications IEEE 802.3 10Base-T Ethernet Standard IEEE 802.3u 100Base-TX Fast Ethernet - Ethernet : 10Mbps (half-duplex) 20Mbps (full-duplex) Data Transfer Rate - Fast Ethernet : 100Mbps (half-duplex) 200Mbps (full-duplex) -100Base-TX UTP/STP category 5 cable Network cable -10Base-T UTP/STP category 3 or 5 cable
ページ5に含まれる内容の要旨
5. FCC Warning This equipment has been tested and found to comply with the regulations for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this user’s guide, may cause harmful interference to radio communic
