ページ1に含まれる内容の要旨
USB Debug Adapter
USB DEBUG ADAPTER USER’S GUIDE
1. Contents
The USB Debug Adapter package contains the following items:
• USB Debug Adapter (USB to Debug Interface) with attached 7” Ribbon Cable
2. USB Debug Adapter Specifications
The USB Debug Adapter provides the interface between the PC’s USB port and the target device’s in-system
debug/programming circuitry. The attached 10-pin DEBUG ribbon cable connects the adapter to the target board
and the target device’s debug interface. The USB De
ページ2に含まれる内容の要旨
Silicon Laboratories USB DEBUG ADAPTER Run Power Stop USB Debug Adapter 3. Hardware Setup using a USB Debug Adapter Connect a target board to a PC running the Silicon Laboratories IDE via the USB Debug Adapter as shown in Figure 2. 1. Connect the USB Debug Adapter to the JTAG or DEBUG connector on a target board with the 10-pin ribbon cable. 2. Connect one end of the USB cable to the USB connector on the USB Debug Adapter. 3. Connect the other end of the USB cable to a USB Port on the PC. 4. C
ページ3に含まれる内容の要旨
USB Debug Adapter 4. Software Setup using a USB Debug Adapter The Silicon Laboratories Integrated Development Environment (IDE) along with other software tools are provided for device development and debugging. The IDE is available for download from the Silicon Laboratories website and is also available on microcontroller development kit CD-ROMs. Once the IDE has been installed and the hard- ware has been connected as shown in Section 3, follow the steps below to built a project, connect and do
ページ4に含まれる内容の要旨
USB Debug Adapter 5. Schematics 4 Rev. 0.1 Figure 4. USB Debug Adapter Schematic (page 1)
ページ5に含まれる内容の要旨
USB Debug Adapter Rev. 0.1 5 Figure 5. USB Debug Adapter Schematic (page 2)
ページ6に含まれる内容の要旨
USB Debug Adapter CONTACT INFORMATION Silicon Laboratories Inc. 4635 Boston Lane Austin, TX 78735 Tel: 1+(512) 416-8500 Fax: 1+(512) 416-9669 Toll Free: 1+(877) 444-3032 Email: MCUinfo@silabs.com Internet: www.silabs.com The information in this document is believed to be accurate in all respects at the time of publication but is subject to change without notice. Silicon Laboratories assumes no responsibility for errors and omissions, and disclaims responsibility for any consequences resulting f
