ページ1に含まれる内容の要旨
5.25” USB 2.0 Enclosure Box
Model # AEN-U55W
User’s Manual
Ver. 1A
ページ2に含まれる内容の要旨
Table of Contents 1. Introduction................................................................................................................................. 3 1.1 Package Contents.................................................................................................................. 3 1.2 Features................................................................................................................................. 3 2. Installation.................................
ページ3に含まれる内容の要旨
1. Introduction Thank you for purchasing this 5.25” USB 2.0 Enclosure Box. The Enclosure Box provides an easy way to add removable disk storage space to your computer. The Hi- Speed USB 2.0 interface ensures fast and reliable connection between the external drive and the computer. With the Hot Swap feature, you can connect and disconnect the Enclosure Box without having to turn off your computer. 1.1 Package Contents Before you begin the installation, please check the contents of you
ページ4に含まれる内容の要旨
2. Installation Follow the steps below for connecting a 5.25” CD/DVD Drive. If you are connecting a 3.5" hard drive, please skip Section 2.2, Hard Drive Installation. 2.1 CD/DVD Drive Installation Step 1 Remove the four pads attached to the enclosure box. Step 2 Use the provided screwdriver to remove the screws on each side of the box. 4
ページ5に含まれる内容の要旨
Step 3 Remove the top cover. If you find it hard to open the cover, use the screwdriver to slightly push the locking tab inside. Step 4 Lift and remove the front panel and the plastic plate. You will not need them for attaching a CD/DVD drive, but we suggest that you keep them for future use. 5
ページ6に含まれる内容の要旨
Step 5 Place the CD/DVD drive with the drive's top facing up and then connect the IDE cable and the power cord to the drive. Make sure the CD/DVD drive you are installing is set to “Master” (refer to the jumper setting information printed on your CD/DVD drive). Step 6 Replace the top cover and re-secure the screws removed in Step 1. 6
ページ7に含まれる内容の要旨
Step 7 Re-attach the four pads to the enclosure box and then connect the supplied power adapter and USB cable to the enclosure box. Congratulations! The CD/DVD drive installation is complete. 2.2 Hard Drive Installation Step 1 Remove the four pads attached to the enclosure box. 7
ページ8に含まれる内容の要旨
Step 2 Use the provided screwdriver to remove the screws on each side of the box. Step 3 Remove the top cover. If you find it hard to open the cover, use the screwdriver to slightly push the locking tab inside. 8
ページ9に含まれる内容の要旨
Step 4 Remove the two screws holding plate A and then remove plate A from plate B. Step 5 Remove plate B from the enclosure box and place the hard drive as shown below. Make sure the hard drive you are installing is set to “Master” (refer to the jumper setting information printed on your hard drive). 9
ページ10に含まれる内容の要旨
Step 6 Turn the plate over and secure the hard drive to the plate with the provided four screws. Step 7 Turn the plate over again and re-secure plate A back to plate B with the screws removed in Step 4. 10
ページ11に含まれる内容の要旨
Step 8 Connect the IDE cable and power cord to the hard drive and then hook plate B back to the enclosure. (Be sure to apply enough force to properly secure the drive). Step 9 Replace the front panel. Step 10 Replace the top cover and re-secure the screws removed in Step 1. Step 11 Re-attach the four pads to the enclosure box and then connect the supplied power adapter and USB cable to the enclosure box. Congratulations! The hard drive installation is complete. 11
ページ12に含まれる内容の要旨
3. Driver Installation for Windows 98SE This Enclosure Box supports Plug-and-Play for Windows ME, 2000, XP, and Mac OS. If you are using Windows 98SE, please refer to the following steps for installing the driver. Step 1 Connect the Enclosure Box to the computer and insert the provided Driver CD to the CD-ROM drive. Step 2 Click Next when the Add New Hardware Wizard appears. 12
ページ13に含まれる内容の要旨
Step 3 Select Search for the best driver for your device (Recommended) and click Next. Step 4 Select the Specify a location check box and click Browse to your CD-ROM drive and open the Driver/Win98SE folder. Click Next. 13
ページ14に含まれる内容の要旨
Step 5 Click Next to install the driver. Step 6 Click Finish to complete the driver installation. 14
ページ15に含まれる内容の要旨
4. Installation Verification To verify your installation, please follow the steps below. 4.1 Windows 98SE Go to Control Panel > System > Device Manager and look for USB Mass Storage Device under Universal Serial Bus controllers. If it is listed, you have successfully installed the Enclosure Box. 15
ページ16に含まれる内容の要旨
4.2 Windows ME/2000/XP Go to Control Panel > System > Device Manager and look for USB Mass Storage Device under Universal Serial Bus controllers. If it is listed, you have successfully installed the Enclosure Box. 16
ページ17に含まれる内容の要旨
4.3 Mac OS 10.x Go to Apple System Profiler > Devices and Volumes. If you see the Enclosure Box listed under USB Information, you have successfully installed the Enclosure Box. 17
ページ18に含まれる内容の要旨
5. Drive Usage Now you are ready to use the attached drive as an external storage device. A brand new hard drive must be formatted and partitioned first. You can use Windows Disk Management utility in Windows XP/2000, Mac built-in partition utility, or other disk management software as required to perform disk-related tasks. Please refer to your software documentation for instructions. You can read and write files to and from the drive as you would with an ordinary drive. 5.1 Removing
ページ19に含まれる内容の要旨
For Mac OS Drag the corresponding USB disk icon that represents the hard drive to the trash can. When prompted, click OK and unplug the Enclosure Box from your computer. 6. Specifications Standards System Requirement • USB 2.0 • Pentium-233MHZ or above Drive Support • 64 MB RAM • CD-ROM/RW • One available USB 2.0 Port • DVD-ROM/RW • Windows 98SE/ME/2000/XP and • 3.5” IDE HDD Mac OS 9.0 or above Environment Ports • Operating Temp: 0 to 40°C • 1
ページ20に含まれる内容の要旨
Technical Support E-mail: support@airlink101.com Toll Free: 1-888-746-3238 Web Site: www.airlink101.com *Actual data throughput will vary. Network conditions and environmental factors lower actual data throughput rate. Specifications are subject to change without notice. All products and trademarks are the property of their respective owners. Copyright ©2006 Airlink101™
