ページ1に含まれる内容の要旨
IP-9610
Hardware User’s Guide
ページ2に含まれる内容の要旨
(This page is intentionally left blank)
ページ3に含まれる内容の要旨
USING IP-9610 SAFELY Handling of This Manual The manual contains important information regarding the safe use of IP-9610. Read it thoroughly before operating this device. Make sure that users of the device read and understand thoroughly all safety precautions contained in the manual. Keep this manual in a safe and convenient location for quick reference. Fujitsu makes every effort to prevent users and bystanders from injury and to prevent property damage. To ensure no harm to you an
ページ4に含まれる内容の要旨
IMPORTANT NOTE TO USERS READ THE ENTIRE MANUAL CAREFULLY BEFORE USING THIS PRODUCT. INCORRECT USE OF THE PRODUCT MAY RESULT IN INJURY OR DAMAGE TO USERS, BYSTANDERS OR PROPERTY. While FUJITSU has sought to ensure the accuracy of all information in this manual, FUJITSU assumes no liability to any party for any damage caused by any error or omission contained in this manual, its updates or supplements, whether such errors or omissions result from negligence, accident, or any other caus
ページ5に含まれる内容の要旨
PREFACE Thank you for purchasing the IP-9610(H264/AVC CODEC). IP-9610 are the video transmission unit with the H.264 encoding technology. This manual explains how to use hardware for IP-9610. This manual is intended for system designers and system managers who use IP-9610. Readers are assumed to have a basic knowledge of networks and video distribution. November 2011 1st Edition Product operating environment • Designed for use in real-time audio/video transmission
ページ6に含まれる内容の要旨
ORGANIZATION AND CONTENTS OF THIS MANUAL The manual consists of five chapters, an appendix, a glossary and an index. Read Chapters 1 and 2 first for information on installing and connecting the device. Read Chapter 3 for operating instructions, and Chapter 4 and subsequent chapters can be read as required. Chapter 1 Preparations This chapter describes the checks that are required before the start of IP-9610 operation. Chapter 2 Installation and Connection This chapter describ
ページ7に含まれる内容の要旨
WARNING INDICATIONS This manual uses warning indications to warn of conditions in order to prevent serious injury and property damage. Warning indications consist of warning markings of specific levels and warning messages. The warning markings are shown below along with their definitions. ! WARNING indicates a situation that could lead to serious injury or loss of life if procedures are not followed correctly. ! CAUTION indicates a situation that could lead to minor or CAUTIO
ページ8に含まれる内容の要旨
SAFETY PRECAUTIONS List of important warnings The table below contains a list of important warning indications. Indicates a situation that could lead to serious injury or loss of life if procedures are not followed correctly. Work type Warning Normal use Possibility of electric shock and fire If an excessive heat, smoke, an abnormal odor or an unusual noise is coming from the device, immediately set its power switch to OFF and remove the power cord plug from the power receptacle.
ページ9に含まれる内容の要旨
Work type Warning Installation Possibility of electric shock and fire Do not install the device in the following places because using it there may cause a fire or electric shock: • Extremely dusty or dirty place • Wet or humid location • Hot location, such as a place where the device is exposed to direct sunlight or is near heating equipment • Near products (e.g., speakers) that generate a strong magnetic field • Location where the temperature is too hot or cold • In an environment
ページ10に含まれる内容の要旨
Work type Warning Installation Possibility of serious injury and damage to the device and Do not install the device in places where it is exposed to shock and strong vibrations, on relocation an incline or in unstable locations. This indicates a hazardous situation that could lead to serious injury or damage to the device. Possibility of serious injury and damage to the device When relocating the device, observe the following precautions to protect against serious injury and d
ページ11に含まれる内容の要旨
LABEL The warning label sho wn below is affixed to the device. ・ Never remove the label. ・ Be sure to check the label at the bottom of this device before coming to the power supply. ・ The following label is intended for users of the device s. 01A 11-11 MODEL H264/AVC CODEC 1.70A-0.71A 100V-240V～ 00001 PART NO. TA23793-B10X 1φ 50/60Hz FC40761A1 0.170kVA-0.171kVA 7kg T 認証番号 D11-0165001 MADE IN JAPAN FUJITSU LIMITED I
ページ12に含まれる内容の要旨
PRODUCT HANDLING PRECAUTIONS Maintenance WARNING Do not try to repair the device yourself. Contact a Fujitsu Service Center. CAUTION Read this manual thoroughly before attempting to operate the device. If you have any questions, contact a Fujitsu Service Center. If a problem occurs, contact a Fujitsu Service Center. The Fujitsu Service Center will ask you to describe the problem, the lamp display status of alarm LEDs and other details. Check the system for this information. C
ページ13に含まれる内容の要旨
CONTENTS USING IP-9610 SAFELY.................................................................................i PREFACE .....................................................................................................iii ORGANIZATION AND CONTENTS OF THIS MANUAL...............................iv WARNING INDICATIONS..............................................................................v SAFETY PRECAUTIONS ..........................................................................
ページ14に含まれる内容の要旨
Chapter 5 Troubleshooting..................................................................45 5.1 Help Information ...................................................................................47 5.2 Alarm LED Lamp Is On.........................................................................49 5.3 Maintenance .........................................................................................50 5.3.1 Maintenance space...........................................................
ページ15に含まれる内容の要旨
CHAPTER 1 Chapter 1 Preparations PREPARATIONS This chapter describes the checks that are required before the start of IP-9610 operation. 1.1 Main Features············································································ 3 1.2 Components··············································································· 5 1.3 Basic Application Examples ······················································· 6 1.4 Part Names··········
ページ16に含まれる内容の要旨
(This page is intentionally left blank)
ページ17に含まれる内容の要旨
Chapter 1 Preparations 1.1 Main Features 1.1 IP-9610 are the video transmission unit with the H.264 encoding technology. Supports H.264 4:2:2 10 bit 1080p video, delivering high quality video encoding. 1U main equipment can hold two codec boards, supporting up to two channels of video encoding. Scalable equipment enables configurations matching your operation scenarios to make it possible by combining SDI Input/Output Board and option licenses. Equipment can be operated from the Web
ページ18に含まれる内容の要旨
Chapter 1 Preparations Hardware option Maximum Description installation Installed according to the number of SDI inputs/outputs. SDI input board 4 Combining two SDI input boards or two SDI output boards SDI output board enables support for dual-link SDI. A codec board is always installed in the base equipment. Installing one additional board enables the following operation modes (*3): Encoder x 2 Codec board (*1) 2 Decoder x 2 Encoder x 1 and Decoder x 1 Decoder x 1 and Encoder
ページ19に含まれる内容の要旨
Chapter 1 Preparations 1.2 Components 1.2 The IP-9610 product package consists of the following components. Attachments for all series consist of same contents. ･ IP-9610: 1 pc (cables separate order) ･ Safety manual: 1 pc ･ User’s Guide: 1 pc ･ Feet: 5 pcs ･ Mounting kit on 19” rack: 2 pcs ･ Holder of power supply cable: 1 pc ･ Pan screw (M4): 6 pcs (19”
ページ20に含まれる内容の要旨
Internet Chapter 1 Preparations 1.3 Basic Application Examples 1.3 Examples (system configuration) of use of IP-9610 are shown below. The basic configuration is for video transmission via point-to-point connections. With this configuration, the camera is connected to the encoder, and video data is transmitted to the decoder over the Internet, and then output to the monitor. Live IP-9610 decoder IP-9610 encoder distribution SDI SDI Camera Monitor System configur
