ページ1に含まれる内容の要旨
5.8-Inch WIDE TELEVISION WITH CD PLAYER
VZ907
INSTRUCTION MANUAL
BEFORE USING
• PAL type video products require receiving area settings to be
entered before TV broadcasts are received. Look on page 11
for instructions on setting up the receiving area. Your
television will not be able to receive TV broadcasts properly
unless these settings are entered correctly.
NTSC type video products do not require receiving area settings.
• Set the “PAL-NTSC” switch on your video CD decoder as
follows. (See p
ページ2に含まれる内容の要旨
Contents Before Use TUNER Control Function Tuner operations with the buttons Safety Precautions ...............................................................................3 Selecting Bands .................................................................................17 Handling Compact Discs......................................................................5 Tuning ................................................................................................17 Visual Function Tuner o
ページ3に含まれる内容の要旨
Safety Precautions WARNING Tape Player Control Function Tape player operations with the buttons To prevent injury and/or fire, take the following Direct Program Search System (DPSS) .............................................28 Tape player operations with the control screens precautions: Playing Cassette Tapes......................................................................28 • Ensure that the unit is securely installed. Otherwise it may fly out of Direct Program Search System (DPSS) ....
ページ4に含まれる内容の要旨
Safety Precautions • You cannot view video pictures while the vehicle is moving. To enjoy Lens Fogging video pictures, find a safe place to park and engage the parking Right after you turn on the car heater in cold weather, dew or brake. condensation may form on the lens in the CD player of the unit. NOTE Called lens fogging, CDs may be impossible to play. In such a situation, remove the disc and wait for the condensation to • If you experience problems during installation, consult your evaporat
ページ5に含まれる内容の要旨
Handling Compact Discs Playing a CD that is dirty, scratched Cleaning CDs Removing the CD or warped can cause the sound to If a CD has become dirty, wipe it off gently Only remove the CD from the machine in a using a commercially available cleaning cloth horizontal direction. You may damage the skip and the unit to operate or a soft cotton cloth, starting from the surface of the CD if you try pulling it down as incorrectly, resulting in worsened centre of the disc and moving outward. Do it eject
ページ6に含まれる内容の要旨
Visual Function Adjusting the Left/Right Angle: Monitor Open/Close Grasp both the sides of the monitor and set it to an easily visible angle. TV/ VD AM DISC FM SOURCE OPEN PWR OFF OPEN Closing the Monitor: Opening the Monitor: Set the left/right angle to the center then lower the monitor so that it is completely flat. The monitor is then drawn in automatically 1 Set the vehicle’s parking brake. after 2 seconds. 2 Press the OPEN button. The monitor opens. CAUTION The gear shift lever or other
ページ7に含まれる内容の要旨
MODE SCRN V.SEL FNC BRIGHT BRIGHT TINT TINT MONITOR SLIDE MONITOR SLIDE SCRN MODE V.SEL FNC COLOR COLOR DIMMER DIMMER Switching Monitor’s Picture The monitor’s picture switches as shown below each time the V.SEL button is pressed. 3 Television or Video 1 or Video 2 3 Navigation 3 Video 2 Displaying Screen Control Screen CAUTION Pressing the SCRN button will cause the screen control screen (screen You cannot view video pictures while the vehicle is moving. To enjoy adjustment mode) to be display
ページ8に含まれる内容の要旨
Visual Function Switching Set Up Screen: Switching Picture Mode ( for TV and video picture) Touch the [ SET UP ] to switch the set up screen. The picture mode switches between normal, full, just and zoom each < see p.10 > time the MODE button is pressed. Switching Audio Control Screen: (with A907) • Full mode • Normal mode Touch the [ AUDIO ] to switch the audio control screen. Switching DSP Control Screen: (with X707) Touch the [ DSP ] to switch the DSP control screen. < see p.31 > S
ページ9に含まれる内容の要旨
Audio Control Function (with A907) Adjusting Audio BALANCE / FADER Adjust various parameters of sound quality. FRONT PREOUT NON-FAD Switching Audio Control Screen: NON - FADER LEVEL Touch the [ AUDIO ] on the menu screen to switch the audio control LEFT RIGHT screen. HPF FRONT 150 KHz BASS BALANCE / FADER HPF REAR 150 KHz FRONT REAR TREBLE LEFT RIGHT OK AUDIO CONTROL SCREEN CONTROL Setting Preout: LOUD ON Touch the [ PREOUT ] to switch the non-fading preout " NON-FAD " and Rear preout " REAR ".
ページ10に含まれる内容の要旨
System Set Up Function Setting AV Output Visual: Setting System Touch the [ AV-OUT ], the video of the AV output terminal will be Switching System Setting Screen: switched as follows. Touch the [ SET UP ] on the menu screen to switch the system setting screen. NORMAL :Picture selected from the TV control screen(page 15) SYSTEM AV-IN 1 VIDEO TV :Picture of the television AV-IN 2 VIDEO 1 :Picture input to the AV-IN1 terminal AUTO CLOCK RDS VIDEO 2 :Picture input to the AV-IN2 terminal AV-OUT
ページ11に含まれる内容の要旨
FM Transmitter ON/OFF switch: Setting On Screen Display Function:(see p.16) If the A907 is not connected, you can use the FM transmitter function to Touch the [ On Screen ] to switch the on screen function auto " AUTO " hear the audio from the TV, video or CD played from your car radio. and manual " MANUAL ". " AUTO " :When a button on the main unit or remote control unit is Touch [FM-TX] to toggle the FM transmitter function on and off. operated or if the lower center of the screen is touched w
ページ12に含まれる内容の要旨
System Set Up Function Setting the Minutes to "00": Adjusting Time Touch the [ RESET ] to set the minutes to "00". You can adjust the time manually. Also, with the automatic time adjustment function set at ON, you can set the clock time automatically according to NOTE time data sent from RDS stations (after receiving RDS signals for several Touch the [ RESET ] while the minute is below "30" rounds it off, and minutes). The factory default is manual time adjustment. while the minute is "30" or m
ページ13に含まれる内容の要旨
Basic Source Control Function Basic operations with the buttons Basic operations with the source control screens T.I. T.I. 1 LIST MODE SCRN FM AM V.SEL FNC FM AM 2 ASPECT V.OFF AV OUTPUT V–CD MPX PTY SELECT FM 1 P 6 98 . 2 MHz FM P 1: 2 00 3 FM 1 P 6 98 . 2 MHz 1: 2 00 FM P 4 FNC TV/ VD DISC OPEN AM FM SOURCE 5 PWR OFF AME 6 FNC ∞ 5 SOURCE Source Control Screen (B) Source Control Screen (A) Switching Source Modes Switching Source Control Screen (A) and (B) Each time you press the SOURCE but
ページ14に含まれる内容の要旨
TV Function TV operations with the buttons TV operations with the control screens Source Control T.I. MODE SCRN V.SEL FNC ASPECT V.OFF AV OUTPUT V–CD MPX LIST Screen(B) 1 SELECT VD TV 2 3 TV 1 P 1 ch 2 1: 2 00 TV/ VD TV P ch AM DISC FM SOURCE OPEN PWR OFF 4 SEEK 4 ¢ FM 5 AME 6 Selecting Bands and Video Inputs Press the FM select the TV band. Each time you press the FM button, the TV bands switches between TV Band / Vodeo input the TV1,TV2,Video1 and Video2. Preset number Channel number Tun
ページ15に含まれる内容の要旨
Selecting Bands NOTE Touch the [ TV ] to select the band. You can store 6 stations in each of the TV1 and TV2 bands. Each time you touch the [ TV ], the band switches between the TV 1 and TV 2. Auto Memory Entry Selecting Tuning Mode: You can automatically store all the receivable channels in the band You can choose from three tuning modes: auto seek, preset station seek, currently being listened to, and then recall them with the touch of a button and manual. The “AUTO1” indicator is displayed w
ページ16に含まれる内容の要旨
TV Function TV List Screen Selecting Channel on the TV Picture Screen Switching TV List Screen: If the lower center of the screen is touched Touch the [ LIST ] on the source control screen(B) to switch the TV list while a TV/video picture is displayed, the screen. audio source, picture settings, video out settings, etc., are superimposed on the picture (On Screen Display). The display TV LIST turns off when the lower center of the TV 1 P 3 ch 5 1: 2 00 TV P ch screen is pressed again. GRAND - T
ページ17に含まれる内容の要旨
TUNER Control Function Tuner operations with the buttons Tuner operations with the control screens Source Control MODE SCRN T.I. V.SEL FNC ASPECT V.OFF AV OUTPUT V–CD MPX Screen(B) LIST LIST 1 SELECT FM AM 2 PTY 3 FM 1 P 6 98 . 2 MHz 1: 2 00 TV/ VD FM P OPEN AM DISC FM SOURCE PWR OFF 4 4 AM FM ¢ FNC 5 AME 6 Selecting Bands Press either the FM or AM button to select the band. Function Control Each time you press the FM button, the band switches between the FM1, FM2 and FM3. Screen Press the A
ページ18に含まれる内容の要旨
TUNER Control Function Selecting Bands Auto Memory Entry You can automatically store all the receivable frequencies in the band Touch either the FM or AM button to select the band. currently being listened to, and then recall them with the touch of a button Each time you touch the FM button, the band switches between the later. This function is especially useful when you are travelling and do not FM1, FM2 and FM3. know what stations are available. Up to 6 frequencies can be stored this Touch t
ページ19に含まれる内容の要旨
Function Control Screen Tuner List Screen Switching Function Control Screen: Switching Tuner List Screen: Touch the [ FNC ] on the source control screen (B) to swicth the Touch the [ LIST ] on the source control screen (B) to switch the tuner function control screen. list screen. Selecting Tuning Mode: You can choose from three tuning modes: auto seek, preset station seek, TUNER LIST and manual. The “AUTO1” indicator is displayed when auto seek tuning is FM 2 P MHz FM P 1 98 . 2 1: 2 00 selected
ページ20に含まれる内容の要旨
RDS Function RDS (Radio Data System) SYSTEM NEWS RDS is a digital information system that lets you receive signals besides those 40 min of regular radio programmes, such as network information being transmitted from radio stations. AF ON CLOCK RDS When listening to an RDS station (ie, a station with RDS capability), the programme service name of the station is displayed along with the frequency, REG ON advising you quickly which station is being received. RDS (Radio Data System) stations also tr
