ページ1に含まれる内容の要旨
Hardware Manual
HDD MULTIMEDIA AV NAVIGATION SERVER
AVIC-Z3
ページ2に含まれる内容の要旨
Table of Contents Manual Overview 1 When Using the Navigation System for the First How to use this manual 1 Time 13 Terminology 1 Selecting a Source with the AV button 13 About the definition of terminology 1 Adjusting the Volume 13 Turning the Source Off 14 Precautions Inserting/Ejecting a Disc 14 Important Safety Information 2 Inserting a disc 14 Ejecting a disc 15 Additional Safety Information 3 Adjusting the LCD Panel Angle 15 To avoid battery exhaustion 3 To ensure safe driving 4 Appendix
ページ3に含まれる内容の要旨
Manual Overview Terminology Before moving on, take a few minutes to read the This manual describes information related to the following information about the conventions used hardware, such as the names of parts for the nav- in this manual. Familiarity with these conventions igation system or precautions for use. Please will help you greatly as you learn how to use your read this manual and all other enclosed manuals new equipment. before using your navigation system. The follow- Button
ページ4に含まれる内容の要旨
Precautions If you notice smoke, a strange noise or Important Safety Information smell from the navigation system, or any other abnormal signs on the LCD screen, Before using your navigation system, be sure to turn off the power immediately and con- read and fully understand the following safety sult your dealer or the nearest authorized information: Pioneer Service Station. Using this navi- Information to User gation system in this condition may result Alteration or modifications carri
ページ5に含まれる内容の要旨
r Failure to set correct information about the local time may result in the navigation system Do not allow this product to come into providing improper routing and guidance contact with liquids. Electrical shock could instructions. result. Also, damage to the product, r Never set the volume of your navigation sys- smoke, and overheating could result from tem so high that you cannot hear outside traf- contact with liquids. fic and emergency vehicles. r To promote safety, certain functions
ページ6に含まれる内容の要旨
When using a display connected to To ensure safe driving REAR MONITOR OUTPUT Parking brake interlock Certain functions offered by this navigation sys- tem could be dangerous if used while driving. To NEVER install the Rear Display in a loca- prevent the use of these functions while in tion that enables the driver to watch motion, there is an interlock with your vehicles Video image while driving. parking brake (Parking brake interlock). If you attempt to use these functions during d
ページ7に含まれる内容の要旨
Chapter 1 Notes Before Using the System Chapter 1 Notes Before Using the System 3. Download owners manuals, order product cat- Important (Serial Number:) alogues, research new products, and much more. The serial number of this device is located on the 4. Receive notices of software upgrades and soft- bottom of this product. For your own security and ware updates. convenience, be sure to record this number on the enclosed warranty card. Features After-sales service for Pioneer products Gene
ページ8に含まれる内容の要旨
Music recognition technology and related data CD playback ® are provided by Gracenote . Gracenote is the Music CD/CD-R/CD-RW playback is possible. industry standard in music recognition technol- MP3 file playback ogy and related content delivery. For more infor- It is possible to play back MP3 files recorded on mation visit www.gracenote.com. CD-ROM/CD-R/CD-RW (ISO9660 Level 1/Level 2 standard recordings). r Supply of this navigation system only conveys a license for private, non-commercial
ページ9に含まれる内容の要旨
Chapter 1 Notes Before Using the System ® About the XM NAVTRAFFIC Bluetooth technology ready When you use this navigation system with a Pio- Logo neer Bluetooth unit (sold separately), a cellular phone featuring Bluetooth technology can be connected wirelessly. The cellular phone used must be compati- ble with the profile of the Bluetooth unit. When using Bluetooth wireless technology, Required $12.95 basic monthly XM radio sub- this navigation system may not be able to scription and XM
ページ10に含まれる内容の要旨
About DTS sounds When recording, pay attention to the following points: Only digital output of DTS audio is possible. If r Pioneer does not compensate for contents navigation systems optical digital outputs are that cannot be recorded or any loss of not connected, DTS audio will not be output, so recorded data due to a malfunction or failure select an audio setting other than DTS. of the navigation system. r The data recorded on the navigation system cannot allowed to be used without pe
ページ11に含まれる内容の要旨
Chapter 1 Notes Before Using the System r Never touch the LCD screen with anything The microprocessor must be reset under the fol- besides your finger when operating the Touch lowing conditions: Panel functions. The LCD screen can scratch Prior to using this navigation system for the easily. (The stylus is supplied for special cali- first time after installation. brations. Do not use the stylus for normal If the product fails to operate properly. operation.) If there appear to be problem
ページ12に含まれる内容の要旨
10 Notes Before Using the System Chapter 1
ページ13に含まれる内容の要旨
Chapter 2 How to Use the Navigation System and Names of the Parts Chapter 2 How to Use the Navigation System and Names of the Parts Checking Part Names and Functions This section gives information about the names of the parts and main the features using the buttons. r For more details on operations and limitations of functions, please refer to the operation manual. c d 1234 5 6 7 8 9 a b e f 1 OPEN CLOSE button 2 RESET button Press to open or close the LCD panel and access Press to recover from
ページ14に含まれる内容の要旨
3 V button a P.LIST (/) button Press to enter the PICTURE ADJUSTMENT Press to change the discs in the magazine when mode. using a multi-CD player (sold separately). Press to switch preset channels when using the ò Operating the Picture Adjustment Þ opera- radio. tion manual r Various operations are possible depending on Press and hold to turn off the back light of the the Audio source. LCD panel. To turn on the back light, press this button again. b T button* Preset button for Traffic au
ページ15に含まれる内容の要旨
Chapter 2 How to Use the Navigation System and Names of the Parts r To cancel standby mode, press the V button r Press and hold the AV button to turn the again, or touch the screen. source off. r In the following cases, the sound source can- When Using the Navigation Sys- not be used: tem for the First Time When a unit corresponding to the source is not connected to the navigation system. The navigation system cannot detect the location When no disc is set in the navigation sys- correctly
ページ16に含まれる内容の要旨
Turning the Source Off Inserting a disc 1 Press the OPEN CLOSE button. Press the AV button and hold until the The LCD panel opens, and the disc loading source turns off. slot appears. r This navigation system also can be Disc loading slot switched off by turning the ACC (ignition) OFF. EJECT button Inserting/Ejecting a Disc When opening, closing and adjusting the angle of the LCD panel, be careful not to get your finger caught. Do not use with the LCD panel left open. If r To close
ページ17に含まれる内容の要旨
Chapter 2 How to Use the Navigation System and Names of the Parts r The built-in DVD drive plays one, standard, 12- 3 Touch [Back]. cm or 8-cm (single) disc at a time. Do not use an adapter when playing 8-cm discs. r If you cannot insert a disc completely or if an inserted disc is not recognized, check that the label side of the disc is up. Press the EJECT button to eject the disc, and check the disc for damage before inserting the disc again. r The adjusted angle of the LCD panel will be
ページ18に含まれる内容の要旨
16 How to Use the Navigation System and Names of the Parts Chapter 2
ページ19に含まれる内容の要旨
Appendix Appendix When the Hard Disk Drive is Dis- Playable discs connected DVD and CD discs that display the logos shown below generally can be played back on this built- If there is no hard disk drive due to repair or serv- in DVD drive. ice, only the Radio source can be operated. The following screen also may appear because DVD-Video the hard disk drive can not run due to low temper- ature. In such a case, park your vehicle in a safe place and turn the ignition switch off. After the tempe
ページ20に含まれる内容の要旨
scratches, or those that are warped may not Meaning of marks on DVDs play properly. Do not use such discs. The marks below may be found on DVD disc Avoid touching the recorded (non-printed side) labels and packages. They indicate the type of surface when handling the disc. images and audio recorded on the disc, and the Store discs in their cases when not in use. functions you can use. Keep discs out of direct sunlight and do not expose the discs to high temperatures. Mark Meaning
