ページ1に含まれる内容の要旨
Intelligent Stick™
TM
Intelligent Stick Pro170
BD09 Series
Rev. A.0 Sep 2006
ページ2に含まれる内容の要旨
Intelligent Stick™ Table of Contents TM 1. Introduction to Intelligent Stick Pro 170............................................................................... 1 2. Main Features Overview ………..……….....................……...…...……………………………...… 1 3. Hardware Specification ………………………………………….………….……………………..… 1 3.1 USB Interface ………………………..………………………..….........…….………...……………… 1 3.2 NAND Flash Interface ……………………………………………...................….…...………………. 1 3.3 OS Support …………………
ページ3に含まれる内容の要旨
Intelligent Stick™ Revision History Revision Date History Remark A.0 09/08 ‘06 New Creation Important!! Please make sure the driver matches the part number on your pen drive before you download. Software AP System Requirements. One of following operation systems: Windows 98/98SE/Windows ME/Windows 2000/Windows XP The advertised memory capacity of this device represents unformatted capa
ページ4に含まれる内容の要旨
Intelligent Stick™ TM 1. Introduction to Intelligent Stick Pro 170 The Intelligent Stick Pro 170 is a PQI patented technology. It combines characteristics of a flash card and a USB flash drive. It does not need a card reader to read from or write to thus making it the perfect storage medium for all types of digital devices. PQI's Intelligent Stick consumes minimum power and its minute dimensions makes it easy to store. For added value, it also comes with password security, partitioning so
ページ5に含まれる内容の要旨
Intelligent Stick™ 4. Block Diagram Program ROM 8051 Micro Controller Program RAM Flash Flash DMA Control Memory Logic Data / Address Bus EDC/ ECC USB2.0 USB 2.0 USB1.1 USB2.0 or 1.1 Port DATA RAM Interface Host CLK PLL, REG PWR_GOOD PWR_RST 5. Absolute Maximum Ratings Symbol Parameter Min Max Unit Tstorage Storage Temperature -20 75 ℃ Ta Ambient Operating Temperature 0 65 ℃ Vcc3 3.3V Supply Voltage -0.3 3.6 V Vcc18 1.8V Supply Voltage -0.3 2 V Vin3.
ページ6に含まれる内容の要旨
Intelligent Stick™ 6. DC Characteristics Symbol Parameter Min. Max. Unit Notes VIH_TTL TTL Input High Voltage 2 Vcc3+0.3 V VIL_TTL TTL Input Low Voltage -0.3 0.8 V VOH_TTL TTL Output High Voltage 0.9 X Vcc3 V VOL_TTL TTL Output Low Voltage 0.45 V TTL Output High Current IOH_TTL -4 mA IOL_TTL TTL Output Low Current 4 mA VIH_USB USB Input High Voltage for Low-/full-speed 2.0 V VIL_USB USB Input Low Voltage for Low-/full-speed 0.8 V Differential Input Sensitivity for VI_
ページ7に含まれる内容の要旨
Intelligent Stick™ 7. Recommended Operating Conditions Symbol Parameter Min. Typical Max. Units Vcc33 Power Supply Voltage 3.0 3.3 3.3 V Vin Input Voltage 0 Vcc Vcc+0.3 V Vcc25 Internal Power Support 2.25 2.5 2.75 v 8. Pin Assignments Pin No. Pin Name Function 1 VCC USB power input 2 USB D- USB differential signal 3 USB D+ The pairs are used to transmit Data/Address/Command 4 VSS Ground 12 3 4 Rev. A.0 4/5
ページ8に含まれる内容の要旨
Intelligent Stick™ 9. Physical Specifications 9.1 Dimensions: 9.1.1 Height: 43mm 9.1.2 Width: 18mm 9.1.3 Depth: 2.8mm 9.1.4 Weight: 2.7g ± 0.5g 9.2 Outline of top view Rev. A.0 5/5 Sep 2006
