ページ1に含まれる内容の要旨
12,000 BTU
Evaporative Portable
Air Conditioner
Owner’s Manual
Model # KY-32E
Please read owner’s manual carefully before operating the unit.
ページ2に含まれる内容の要旨
TABLE OF CONTENTS PAGE Table of Contents …………….………………………………………………………………………2 Introduction ……………………………………….………………………………………….............3 Important Safeguards ……………………………………………………………………………….. 4 LCDI Power Cord and Plug…………………………………………………………………………. 5 Package Contents …………………………………………………………………………………….6 Parts Diagram ………………………………………………………………………………………...6 Assembly Requirements ……………………….……………………………………………………..8 Control Pane
ページ3に含まれる内容の要旨
INTRODUCTION Thank you for purchasing the Soleus Air KY-32E 12000 BTU Portable Evaporative Air Conditioner. This unit is designed to improve living and working comfort by providing cooling, dehumidifying and fan functions with minimal installation. This multi-functional portable air conditioner operates as an air conditioner, dehumidifier, and fan. Unlike traditional portable air conditioners, there is no bucket to empty. The condensate water is evaporated and removed through the
ページ4に含まれる内容の要旨
IMPORTANT SAFEGUARDS Before installing and using the portable air conditioner, please read this Owner’s manual carefully. 1. Never use or store gasoline or other flammable vapor or liquid near this unit. 2. Maintain at least 20” (50cm) clearance space around all side of the unit. Do not obstruct air inlet or outlet grilles. 3. All in-home wiring must comply with local and national codes and be installed by a qualified technician. All wiring problems should be resolved by a qualif
ページ5に含まれる内容の要旨
LCDI POWER CORD AND PLUG This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord and plug as required by US National Electric Code 440.65. This cord consists of a length of shielded flexible cord with no termination on the load side and a LCDI attachment plug on the line side. The LCDI power cord and plug will remove the supply source via electrical disconnect (circuit trip) if the nominal current leakage between the cord shield and either l
ページ6に含まれる内容の要旨
PACKAGE CONTENTS 1. Portable Air Conditioner 2. Air Exhaust Duct 3. Exhaust Duct Window Kit Adapter 4. Remote Control 5. AAA Batteries (2) 6. Window Kit - 3 Sliding Panels 7. Window Kit Fastener Screws (4) 8. Continuous Drainage Tube 9. Exhaust Outlet Wall Cover 10. User’s Manual PARTS DIAGRAM FRONT VIEW 6
ページ7に含まれる内容の要旨
REAR VIEW WINDOW KIT EXHAUST DUCT 7
ページ8に含まれる内容の要旨
ASSEMBLY REQUIREMENTS EXHAUST DUCT When you use the unit as an air conditioner, the hot exhaust air and evaporated condensate water must be vented out of the room. The exhaust duct and venting kit serves this purpose. NOTE: The exhaust duct and venting kit should not be used while the unit is operated in dehumidification, or fan mode. DO NOT INSTALL EXHAUST DUCT WHILE UNIT IS IN OPERATION. a) Slide “Unit Terminal End” of the exhaust connector completely over the “Hot Air
ページ9に含まれる内容の要旨
NOTE: In order to achieve maximum room cooling efficiency, the exhaust duct should remain as short and straight as possible. To further shorten the exhaust hose, first unthread either exhaust duct adapter clockwise to remove it. Then cut the hose to desired length. It is not recommended to increase the manufacturer’s length of the exhaust hose. This may reduce the cooling efficiency or damage the unit WINDOW KIT INSTALLATION a) Open window or sliding door approximately 5 inches
ページ10に含まれる内容の要旨
CONTROL PANEL FUNCTIONS 1. Power On/Off Control Starts or stops the unit. 2. Temperature Setting Control Select the desired temperature setting by pressing either the ▲▼ buttons. It is recommended to set the temperature before selecting the Mode Control. 3. Mode Control Select the functions of the unit for: Air Conditioning Mode Dehumidifying Mode Fan Mode Auto Mode 4.
ページ11に含まれる内容の要旨
LCD DISPLAY OPERATION USING THE CONTROL PANEL COOLING OPERATION 1. Ensure the exhaust duct properly installed. Refer to page 8 for exhaust duct installation. 2. Plug the Power Cord to the power outlet. 3. Turn on the unit by pressing the Power Button on the control panel. Manual Mode: Press the Mode Button repeatedly until appears on the LCD display. Press the Temperature Buttons up or down until the desired room temperature appears on the LCD. The o o o temperature ran
ページ12に含まれる内容の要旨
NOTE: Do not use the exhaust duct when the unit is running at dehumidifying mode. You must remove the exhaust duct from the unit. When the unit is running at dehumidifying mode, the fan speed cannot be adjusted. Keep the windows and the doors closed to aid the efficiency of the unit in removing the moisture from the room. FAN OPERATION 1. Plug the Power Cord to the power outlet. 2. Turn on the unit by pressing the Power Button on the control panel. 3. Press the Mode Button unti
ページ13に含まれる内容の要旨
SETTING THE CLOCK 1. Press 1/0 button to turn on the remote control. 2. Press the Hr and Min buttons until the LCD displays the correct time. 3. Press the Send button to set time. COOLING OPERATION 1. Press the 1/0 button to turn on the remote control. 2. Press the Mode button until the LCD displays the cooling symbol. 3. Press either +°F or -°F button until the LCD displays the desired temperature. Each press will increase or decrease the set temperature by
ページ14に含まれる内容の要旨
OPTIONAL WATER DRAINAGE When operating the air conditioner in cooling or dehumidifying mode under normal conditions, the condensation water is automatically evaporated from an internal drip pan out through the exhaust duct. Under extremely high humidity conditions, the water in the drip pan may reach a level that triggers a shut-off mechanism. The compressor and fan will turn off and the water must be drained via one of the following two methods. CONTINUOUS DRAINAGE When th
ページ15に含まれる内容の要旨
MANUAL DRAINAGE When the unit is operating in manual drainage mode, excess condensation in the drip pan will rise until it reaches a predetermined level, at which time the air conditioner will signal a warning (E4 on LCD) and shut off. To drain the excess condensation, turn off the air conditioner, remove the drain plug and allow water to drip into an external pan or drainage tubing. WARNING: Do not operate the air conditioner without the drain plug unless the drainage tube is dir
ページ16に含まれる内容の要旨
CASE 1. Avoid direct exposure to sunlight as case color may fade. 2. Clean surface area with a damp cloth. Dry with a soft towel. 3. Vacuum grill inlets with a soft brush attachment. NOTE: Do not use abrasive cleaning products on the case. STORING THE UNIT FOR AN EXTENDED PERIOD OF TIME OR TRANSPORTING 1. Unplug the unit from the power outlet. 2. Ensure that the water bucket is empty. 3. If using continuous drainage, disconnect any external drain hose and cap the end of the in
ページ17に含まれる内容の要旨
TECHNICAL SPECIFICATIONS MODEL KY-32E COOLING CAPACITY 12,000 BTU/HR DEHUMIDIFYING CAPACITY 95 PINTS/DAY COOLING 1300 W POWER AIR FLOW VOLUME 170 CFM 115 V / 60 HZ POWER SOURCE 12 AMP COOLING SOUND PRESSURE LEVEL <56 db(A) OPERATING TEMP 61 F -95 F NET WEIGHT 99 lbs DIMENSIONS PACKAGE 21 x 19 x 45 ½ In (WxDxH) ASSEMBLED 17 ¼ x 14 ¼ x 34 In (WxDxH) REFRIGERANT R22 HIGH SIDE PRESSURE 358 PSI LOW SIDE PRESSURE 180 PSI CONTACT INFORMATION Contact
ページ18に含まれる内容の要旨
WARRANTY ONE YEAR LIMITED WARRANTY Soleus Air International Inc. warrants the accompanying Soleus Air KY-32E Soleus Air Portable Air Conditioner to be free of defects in material and workmanship for the applications specified in its operation instruction for a period of ONE (1) year from the date of original retail purchase in the United States or Canada. If the air conditioner exhibits a defect in normal use, Soleus Air International Inc. will, at its option, either repair or replace
