ページ1に含まれる内容の要旨
Product Manual
Barracuda 7200.11 Serial ATA
ST31000333AS
ST3640323AS
ST3320613AS
ST3320813AS
ST3160813AS
100507013
Rev. B
June 2008
ページ2に含まれる内容の要旨
Revision history Revision Date Sheets affected or comments Rev A 06/17/08 Initial release Rev. B 06/25/08 4 and 6. Copyright © 2008 Seagate Technology LLC. All rights reserved. Printed in U.S.A. Publication number: 100507013, Rev. B, June 2008 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Barracuda, SeaTools and SeaTDD are either trademarks or registered trademarks of Seagate Technology LLC or one
ページ3に含まれる内容の要旨
Contents 1.0 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 About the Serial ATA interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2.0 Drive specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Formatted capacity . . . . . . . . . . . . . . . . . . . .
ページ4に含まれる内容の要旨
ii Barracuda 7200.11 Serial ATA Product Manual, Rev. B
ページ5に含まれる内容の要旨
List of Figures Figure 1. Serial ATA connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Figure 2. Attaching SATA cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Figure 3. Mounting dimensions (1000 & 640 GB models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Figure 4. Mounting dimensions (320 & 160 GB models) . . . . . . . . . . .
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate ® Barracuda 7200.11 Serial ATA model drives: ST31000333AS ST3640323AS ST3320613AS ST3320813AS ST3160813AS These drives provide the following key features: • 7,200 RPM spindle speed. • High instantaneous (burst) data-transfer rates (up to 300 Mbytes per second). • Perpendicular recording, Tunneling Magnetoresistive (TMR) recording heads and EPRML technology, for increased ar
ページ8に含まれる内容の要旨
1.1 About the Serial ATA interface The Serial ATA interface provides several advantages over the traditional (parallel) ATA interface. The primary advantages include: • Easy installation and configuration with true plug-and-play connectivity. It is not necessary to set any jump- ers or other configuration options. • Thinner and more flexible cabling for improved enclosure airflow and ease of installation. • Scalability to higher performance levels. In addition, Serial ATA makes the transition f
ページ9に含まれる内容の要旨
2.0 Drive specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following drive models: ST31000333AS ST3640323AS ST3320613AS ST3320813AS ST3160813AS Specification summary tables The specifications listed in the following tables are for quick reference. For details on specification measure- ment or definition, see the appro
ページ10に含まれる内容の要旨
Table 1: Drive specifications summary for 1000 and 640 Gbyte models Drive specification ST31000333AS ST3640323AS Formatted capacity (512 bytes/sector)* 1000 Gbytes 640 Gbytes Guaranteed sectors 1,953,525,168 1,250,263,728 Heads 6 4 Discs 3 2 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Recording density 1300 kbits/in max 1250 kbits/in max Track density 182 ktracks/in avg 2 2 Areal density 228 Gbits/in avg 219 Gbits/in avg Spindle speed 7
ページ11に含まれる内容の要旨
Drive specification ST31000333AS ST3640323AS Vibration, operating 2–22 Hz: 0.25 Gs, Limited displacement 22–350 Hz: 0.50 Gs 350–500 Hz:: 0.25 Gs Vibration, nonoperating 5–22 Hz: 2.0 Gs 22–350 Hz: 5.0 Gs 350–500 Hz:: 2.0 Gs Drive acoustics, sound power Idle** 2.9 bels (typical) 2.7 bels (typical) 3.1 bels (max) 2.9 bels (max) Performance Seek 3.2 bels (typical) 3.1 bels (typical) 3.3 bels (max) 3.2 bels (max) Quiet Seek 3.1 bels (typical) 3.0 bels (typical) 3.2 bels (max) 3.
ページ12に含まれる内容の要旨
Table 2: Drive specifications summary for 320 and 160 Gbyte models Drive specification ST3320613AS ST3320813AS ST3160813AS Formatted capacity (512 bytes/sector)* 320 Gbytes 160 Gbytes Guaranteed sectors 625,142,448 312,581,808 Heads 2 1 Discs 1 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Recording density 1250 kbits/in max Track density 182 ktracks/in avg 2 Areal density 219 Gbits/in avg Spindle speed 7,200 RPM Internal data transfer ra
ページ13に含まれる内容の要旨
Drive specification ST3320613AS ST3320813AS ST3160813AS Vibration, operating 2–22 Hz: 0.25 Gs, Limited displacement 22–350 Hz: 0.50 Gs 350–500 Hz:: 0.25 Gs Vibration, nonoperating 5–22 Hz: 2.0 Gs 22–350 Hz: 5.0 Gs 350–500 Hz:: 2.0 Gs Drive acoustics, sound power Idle** 2.5 bels (typical) 2.7 bels (max) Quiet Seek 2.6 bels (typical) 2.8 bels (max) 14 Nonrecoverable read errors 1 per 10 bits read Annualized Failure Rate (AFR) 0.34% Warranty 5 years on distribution units. To determ
ページ14に含まれる内容の要旨
2.1 Formatted capacity Formatted Guaranteed Model Bytes per sector capacity* sectors ST31000333AS 1000 Gbytes 1,953,525,168 512 ST3640323AS 640 Gbytes 1,250,284,896 512 ST3320613AS 320 Gbytes 625,142,448 512 ST3320813AS ST3160813AS 160 Gbytes 312,581,808 512 *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. 2.1.1 LBA mode When addressing these drives in LBA mode, all blocks (sectors) ar
ページ15に含まれる内容の要旨
2.4 Physical characteristics Maximum height 1000 & 640 GB models 26.1 mm (1.028 inches) 320 & 160 GB models 20.17 mm (0.794 inches) Maximum width 101.6 mm (4.000 +/- 0.010 inches) Maximum length 146.99 mm (5.787 inches) Typical weight 1000 GB models 677 grams (1.493 lbs) 640 GB models 543 grams (1.199 lbs) 320 & 160 GB models 368 grams (0.811 lbs) Cache buffer ST31000333AS & ST3640323AS 32 Mbytes (32,768 kbytes) ST3320613AS 16 Mbytes (16,384 kbytes) ST3320813AS and ST3160813AS 8 Mbytes (8,19
ページ16に含まれる内容の要旨
2.6 Start/stop times 1000 GB Models 640 GB Models 320 & 160 GB Models Power-on to Ready (sec) 20 (max) Power-on to Ready (sec) (2.0 Amp Code Option) 11 (max) Standby to Ready (sec) 15 (max) 14 (max) 15 (max) Ready to spindle stop (sec) 10 (max) 2.7 Power specifications The drive receives DC power (+5V or +12V) through a native SATA power connector. See Figure 2 on page 20. 2.7.1 Power consumption Power requirements for the drives are listed in the table on page 9. Typical power measurements are
ページ17に含まれる内容の要旨
Table 3: DC power requirements Power dissipation (3-disc values shown) Avg (watts 25° C) Avg 5V typ amps Avg 12V typ amps Spinup — — 3.0 (peak) Idle* 7.96 0.320 0.530 Idle* (with offline activity) 9.29 0.610 0.520 Operating (40% r/w, 40% seek, 20% inop.) 11.16 0.600 0.680 Seeking (random, 20% idle) 10.42 0.500 0.660 Standby 0.99 0.150 0.020 Sleep 0.99 0.150 0.020 *During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic
ページ18に含まれる内容の要旨
2.7.4 Power-management modes The drive provides programmable power management to provide greater energy efficiency. In most systems, you can control power management through the system setup program. The drive features the following power-management modes: Power modes Heads Spindle Buffer Active Tracking Rotating Enabled Idle Tracking Rotating Enabled Standby Parked Stopped Enabled Sleep Parked Stopped Disabled • Active mode The drive is in Active mode during the read/write and seek operation
ページ19に含まれる内容の要旨
2.8 Environmental specifications 2.8.1 Ambient temperature Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Actual drive case temperature should not exceed 69°C (156°F) within the operating ambient conditions. Above 1,000 feet (305 meters), the maximum temperature is derated linearly to 112°F (44°C) at 10,000 feet (3,048 meters). Operating: 0° to 60°C (32° to 140°F) Nonoperating: –40° to 70°C (–40° to 158°F) 2.8.2 Temperature gradient Ope
ページ20に含まれる内容の要旨
2.8.5.2 Nonoperating shock 1000 & 640 GB models The nonoperating shock level that the drive can experience without incurring physical damage or degradation in performance when subsequently put into operation is 300 Gs based on a nonrepetitive half-sine shock pulse of 2 msec duration. 320 & 160 GB models The nonoperating shock level that the drive can experience without incurring physical damage or degradation in performance when subsequently put into operation is 350 Gs based on a nonrepetiti
