ページ1に含まれる内容の要旨
Computer
Motherboard
• Master or single-drive: The drive is shipped configured for a master
or a single-drive with a jumper set on pins 7 and 8.
U8 Family Installation Guide
• Drive is slave: To configure the drive as a slave, or second drive on
ST34313A, ST38410A, ST313021A, ST317221A
the cable, remove all the jumpers.
Publication Number: SG35236-001, Rev. B
• Master with non-ATA compatible slave: Use this setting if the slave
drive is not recognized. To enable this option, configure the ma
ページ2に含まれる内容の要旨
Preparing the Drive with Disk Manager 4. Does Scandisk find the drive defect-free? Scandisk is a utility Installing a Single Drive located on your Windows startup diskette that scans the drive for de- If you are installing a single drive, we recommend using Disk Manager fects. If defects are detected, this may be an indication of a problem. to automatically partition and format your drive. This software is stored 5. Why won’t the drive format to full capacity? Verify that your BIOS on the diske
