Renesas R0E53036ACFK40の取扱説明書

ページ1に含まれる内容の要旨

R0E53036ACFK40
Converter Board for Connecting R8C/36E, R8C/36F, R8C/36G and R8C/36H Groups
64-pin 0.5mm pitch LQFP
User’s Manual
* NQPACK, YQPACK, YQSOCKET, YQ-GUIDE, HQPACK, TQPACK, TQSOCKET, CSSOCKET, CSPLUG/W and LSPACK are
trademarks of Tokyo Eletech Corporation.




If the requirements shown in the "CAUTION" sentences are ignored,
CAUTION
the equipment may cause personal injury or damage to the products.


Renesas Tools Homepage http://www.renesas.com/tools
Rev.1.00
(1/4)

ページ2に含まれる内容の要旨

1. Outline The R0E53036ACFK40 is a converter board for connecting the signals of the MCU unit R0E521300MCU00 for R8C/Tiny Series to a foot pattern for 64-pin 0.5mm pitch LQFP of R8C/36E, R8C/36F, R8C/36G and R8C/36H groups. R053036ACFK40 YQPACK064SD 2. Package Components (See Figure 1) Check to see if the R0E53036ACFK40 package has all the following contents before using this product. YQ-GUIDE (×4) NQPACK064SD-ND (1) R0E53036ACFK40 converter board .........................

ページ3に含まれる内容の要旨

Pb Free MADE IN JAPAN 5. Connection Procedure (See Figure 3) The procedure for connecting the R0E53036ACFK40 is shown below. (1) Mount the NQPACK064SD-ND on the user system. (2) Attach the YQPACK064SD on the NQPACK064SD-ND. (3) Secure the four corners of the YQPACK064SD with the YQ-GUIDEs. ● Do not use the screws included with the YQPACK064SD for fixing the YQPACK064SD. ● Do NOT use the screwdriver included with the NQPACK064SD-ND for fixing the YQ-GUIDEs. That is used only

ページ4に含まれる内容の要旨

7. Precautions CAUTION Cautions to Be Taken for This Product: When connecting the YQPACK064SD, be sure to use the included YQ-GUIDEs. Do NOT use the screws included with the YQPACK064SD for connecting the YQPACK064SD. IMPORTANT Notes on This Product: We cannot accept any request for repair. For purchasing the NQPACK064SD-ND, YQPACK064SD, HQPACK064SD, contact the following: Tokyo Eletech Corporation http://www.tetc.co.jp/e_index.htm For inquiries about the product or t