ページ1に含まれる内容の要旨
4-093-064-14(1)
TFT LCD Color
Computer Display
GB
Operating Instructions
FR
Mode d’emploi
DE
Bedienungsanleitung
ES
Manual de instrucciones
IT
Istruzioni per l’uso
SDM-S51R
SDM-S71R
SDM-S81R
© 2002 Sony Corporation
ページ2に含まれる内容の要旨
Owner’s Record NOTICE This notice is applicable for USA/Canada only. The model and serial numbers are located at the rear of the unit. If shipped to USA/Canada, install only a UL LISTED/CSA Record these numbers in the spaces provided below. Refer to them LABELLED power supply cord meeting the following whenever you call upon your dealer regarding this product. specifications: Model No. Serial No. SPECIFICATIONS Plug Type Nema-Plug 5-15p Cord
ページ3に含まれる内容の要旨
Table of Contents Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Identifying parts and controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Step 1: Connect the display to your computer . . . . . . . . . . . . . . . . . 7 Step 2: Connect the power cord. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Step 3: Secure the cords and
ページ4に含まれる内容の要旨
Note on the LCD (Liquid Crystal Display) Precautions Please note that the LCD screen is made with high- precision technology. However, black points or bright Warning on power connections points of light (red, blue, or green) may appear Use the supplied power cord. If you use a different power cord, constantly on the LCD screen, and irregular colored be sure that it is compatible with your local power supply. stripes or brightness may appear on the LCD screen. For the customers in the U.S.
ページ5に含まれる内容の要旨
1 1 (Power) switch and indicator (pages 9, 16, 20) Identifying parts and controls This switch turns the display on and off. The power indicator lights up in green when the display is See the pages in parentheses for further details. turned on, and lights up in orange when the monitor is in power saving mode. Front of the LCD display 2 MENU button (pages 10, 11) This button displays or closes the main menu. MENU 3 6 (contrast) button (page 11) MENU This button displays the CONTRAST menu. OK 4
ページ6に含まれる内容の要旨
9 AC IN connector (page 8) Rear of the LCD display Connect the power cord (supplied). q; HD15 (RGB) input connector (page 7) This connector inputs RGB video signals (0.7 Vp-p, positive) and SYNC signals. 1 5 4 3 2 10 9 8 7 6 15 14 13 12 11 Pin No. Signal 1Red OPEN 2 Green (SDM-S51R) Green (Sync on Green) (SDM-S71R/S81R) 3Blue 4 ID (Ground) 5 DDC Ground* Open the back cover. 6 Red Ground SDM-S51R 7 Green Ground 8 Blue Ground 9 DDC + 5V* 10 Ground 11 ID (Ground) 12 Bi-Directional Data (SDA)* 13 H
ページ7に含まれる内容の要旨
x Connecting to a Macintosh or compatible computer Setup When connecting this monitor to a Macintosh computer, use the Macintosh adapter (not supplied) if necessary. Connect the Before using your monitor, check that the following items are Macintosh adapter to the computer before connecting the cable. included in your carton: LCD display Power cord HD15 (RGB) video signal cable Cord strap Windows Utility/Macintosh Utility Disk Warranty card This instruction manual Step 1:Connect
ページ8に含まれる内容の要旨
Step 2:Connect the power cord Step 3:Secure the cords and close the back cover With the monitor and computer switched off, first connect the power cord to the monitor, then connect it to a power outlet. 1 Remove the cable holder. to AC IN OPEN Cable holder Illustrations of monitor rear are the SDM-S51R. The same applies for the SDM-S71R/S81R model. 2 Secure the cables and cords with the cable holder. To close the back cover securely, bundle the cables and cords as illustrated. to a power outl
ページ9に含まれる内容の要旨
Step 4:Turn on the monitor and Adjusting the tilt computer This display can be adjusted within the angles shown below. 5° 1 Press the 1 (power) switch. 30° The indicator of the monitor lights up in green. 2 Turn on the computer. The installation of your monitor is complete. If necessary, use the monitor’s controls to adjust the picture. Grasp the lower sides of the LCD panel, then adjust screen tilt. If no picture appears on your screen Check that the power cord and the video signal cable are
ページ10に含まれる内容の要旨
4 V CENTER (page 12) VCENTER Select the V CENTER menu Customizing Your Monitor to adjust the picture’s vertical centering. Before making adjustments 50 Connect the monitor and the computer, and turn them on. Wait for at least 30 minutes before making adjustments for the best result. EX I T 5COLOR (page13) You can make numerous adjustments to your monitor using the COLOR Select the COLOR menu to on-screen menu. 9300K adjust the color temperature 6500K of the picture. This adjusts USER LD
ページ11に含まれる内容の要旨
x Using the MENU, M/m, and OK buttons Adjusting the contrast (CONTRAST) 1 Display the main menu. Contrast adjustment is made using a separate CONTRAST menu Press the MENU button to display the main menu on your from the main menu (page 10). screen. 1 Press the 6 (contrast) button. The CONTRAST menu appears on the screen. MENU CONTRAST 70 2 Select the menu you want to adjust. 48 . 4kHz / 60Hz Press the M/m buttons to display the desired menu. Press the OK button to select the menu item. Horizo
ページ12に含まれる内容の要旨
8 Press the M/m buttons to select (PHASE) and Eliminating flicker or blurring press the OK button. The PHASE menu appears on the screen. (PHASE/PITCH) 9 Press the M/m buttons until the horizontal stripes When the monitor receives an input signal, the automatic picture are at a minimum. quality adjustment function of this monitor automatically adjusts Adjust so that the horizontal stripes are at a minimum. the picture position, phase, and pitch, and ensures that a clear picture appears on
ページ13に含まれる内容の要旨
To change the GAMMA setting Adjusting the color temperature You can select the GAMMA setting from “GAMMA 1” – (COLOR) “GAMMA 3.” The highest setting is “GAMMA 3.” The COLOR settings allow you to adjust the picture’s color 1 Press the MENU button. temperature by changing the color level of the white color field. The main menu appears on the screen. Colors appear reddish if the temperature is low, and bluish if the temperature is high. 2 Press the M/m buttons to select (COLOR) and You can
ページ14に含まれる内容の要旨
Changing the menu’s position Additional settings (MENU POSITION) You can adjust the following options: BACKLIGHT You can change the menu position if it is blocking an image on ZZ... POWER SAVE the screen. LANGUAGE MENU LOCK 1 Press the MENU button. The main menu appears on the screen. 1 Press the MENU button. The main menu appears on the screen. 2 Press the M/m buttons to select (MENU POSITION) and press the OK button. 2 Keep pressing the m button until the icon of the desired op
ページ15に含まれる内容の要旨
x Locking the menus and controls First press the M/m buttons to select (MENU LOCK) and press the OK button. Then press the M/m buttons and select ON. Only the 1 (power) switch, and (MENU LOCK) of the option menu will operate. If any other items are selected, the mark appears on the screen. To cancel the menu lock Repeat the procedure above and set and (MENU LOCK) to OFF. GB 15
ページ16に含まれる内容の要旨
Automatic picture quality Technical Features adjustment function When the monitor receives an input signal, it automatically Power saving function matches the signal to one of the factory preset modes stored in the monitor’s memory to provide a high quality picture at the center This monitor meets the power-saving guidelines set by VESA, of the screen. ENERGY STAR, and NUTEK. If the monitor is connected to a For input signals that do not match one of the factory preset computer or video g
ページ17に含まれる内容の要旨
If CABLE DISCONNECTED appears on the screen This indicates that the video signal cable has been disconnected Troubleshooting from the currently selected connector. Before contacting technical support, refer to this section. INFORMAT ION CABLE D I SCONNECTED On-screen messages GO TO POWER SAVE If there is something wrong with the input signal, one of the following messages appears on the screen. To solve the problem, see “Trouble symptoms and remedies” on page 18. If OUT OF SCAN RANGE appears
ページ18に含まれる内容の要旨
Trouble symptoms and remedies If a problem is caused by the connected computer or other equipment, please refer to the connected equipment’s instruction manual. Use the self-diagnosis function (page 20) if the following recommendations do not resolve the problem. Symptom Check these items No picture If the 1 (power) indicator is not lit, Check that the power cord is properly connected. or if the 1 (power) indicator will not Check that the 1 (power) switch is in the “on” position. light up wh
ページ19に含まれる内容の要旨
Symptom Check these items Picture is fuzzy Adjust the brightness and contrast (page 11). Adjust the pitch and phase (page 12). xProblems caused by the connected computer or other equipment Set the resolution to XGA (1024 × 768) on your computer (SDM-S51R). Set the resolution to SXGA (1280 × 1024) on your computer (SDM-S71R/S81R). Picture is ghosting Eliminate the use of video cable extensions and/or video switch boxes. Check that all plugs are firmly seated in their sockets. Picture
ページ20に含まれる内容の要旨
Self-diagnosis function This monitor is equipped with a self-diagnosis function. If there is a problem with your monitor or computer(s), the screen will go blank and the 1 (power) indicator will either light up green or flash orange. If the 1 (power) indicator is lit in orange, the computer is in power saving mode. Try pressing any key on the keyboard or moving the mouse. 1 (power) indicator If the 1 (power) indicator is green 1 Turn off the 1 (POWER) switch and disconnect the video signa
