ページ1に含まれる内容の要旨
Table of Contents
Preface ..............................................................................................................................................1
Chapter 1 Installation...................................................................................................................3
Unpacking........................................................................................................................................3
Connecting the LCD Monitor and Base ..
ページ2に含まれる内容の要旨
matériel brouilleur du Canada. 2
ページ3に含まれる内容の要旨
Important Safety Instructions Please read the following instructions carefully. This manual should be retained for future use. 1. To clean LCD Monitor screen; -- Power off LCD Monitor and unplug the AC Cord. -- Spray a non-solvent cleaning solution onto a rag. -- Gently clean the screen with dampened rag. 2. Do not place the LCD Monitor near a window. Exposing the monitor to rain water, moisture or sunlight can severely damage it. 3. Do not apply pressure to the LCD screen. Exce
ページ4に含まれる内容の要旨
Connecting the LCD Monitor and Base When you open the box to take the base and put on the desk first. Then connect the LCD Monitor and base please.(See fig.1-1 ) Figure 1-1 Viewing Angle Adjustment The LCD Monitor is designed to allow users to have a comfortable viewing angle. The viewing angle can be adjusted from -5°to +30°.(See fig. 1-2) Figure 1-2 Warning Do not force the LCD Monitor over its maximum viewing angle settings as stated above. Attempting this will result in da
ページ5に含まれる内容の要旨
Connecting the AC Power 1. Connect the power cord to the LCD Monitor.(See Fig. 1-6) 2. Connect the power cord to an AC power source. Figure 1-6 Connecting the Audio Cable (For AL712/AL716) 1. Connect the audio cable to the " LINE OUT " jack on your PC's audio card or to the front panel's “AUDIO OUT” jack of your CD ROM drive. (See Fig. 1-7) 2. Connect the other end of the audio cable to the LCD Figure 1-7 Monitor's " LINE IN " jack. Setting Up the LCD Monitor 1. Turn on the L
ページ6に含まれる内容の要旨
Press either left or right control button for OSD (On Screen 5 Function Select Buttons Display) menu selection. Adjustment Control Press the left button to decrease the OSD setting and press the 6 Buttons right button to increase the OSD setting. External Headphone Jack The monitor speakers will be disabled when using an external 7 (AL712/AL716) headphone or external speakers. Adjusting the Monitor's Display The monitor has four function control buttons to select among functions show
ページ7に含まれる内容の要旨
Function Description Icon Function Function Description Brightness 101 scales of brightness are available to choose from (0 to 100). Contrast 101 scales of contrast are available to choose from (0 to 100). H. Position This function let's you adjust the display's horizontal position This function let's you adjust the display's vertical position. V. Position This function let's you select the images sharpness. Five selections are Sharpness available. A smoother setting is more su
ページ8に含まれる内容の要旨
adjusted from the OSD menu Temperature. 8
ページ9に含まれる内容の要旨
Chapter 3 Technical Information Specifications LCD Panel Size 17" (43 cm) Display Type Active matrix color TFT LCD Resolution 1280 x 1024 Display Dot 1280 x (RGB) x 1024 Display Area (mm) 337.92 x 270.336 (H x V) Display Color 262K 2 Brightness 250 cd/m (typical) Contrast Ratio 500:1 (typical) Response Time Ta=25°C Tr+Tf=20ms Lamp Voltage 705 Vrms (typical) Lamp Current 6.5 mA rms. (typical) Viewing Angle Vertical: -65° ~ +65° Horizontal: -80° ~ +80° Video Input Signal An
ページ10に含まれる内容の要旨
Sync Input Separate TTL compatible horizontal and vertical synchronization Signal Digital TMDS Polarity Positive and negative Supports VESA DDC1 and DDC2B functions Plug & Play External Connection Power Input (AC input) AC socket Video Cable 1.8M with 15-pin D-sub connector, 1.8M with 24-pin DVI-D(For AL712/AL713) Audio Cable 1.5M with Stereo Jack(For AL712/AL716) Environment Temperature 5°C to 40°C/41°F to 104°F Operating Condition: Relative Humidity 20% to 80% Temperature
ページ11に含まれる内容の要旨
11
ページ12に含まれる内容の要旨
Standard Timing Table If the selected timing is NOT included in table below, this LCD monitor will use the most suitable available timing. H. Freq. V. Freq. Pixel Freq. H/V Sync. Resolution Mode (KHz) (Hz) (MHz) Polarity 640 x 350 31.469 70.087 25.175 +/- VGA-350 640 x 400 24.830 56.420 21.050 -/- NEC PC9801 640 x 400 31.469 70.087 25.175 -/+ VGA-400-GRAPH 640 x 400 31.50 70.15 25.197 -/- NEC PC9821 640 x 480 31.469 59.940 25.175 -/- VGA-480 640 x 480 35.00 66.67 30.24 -/- APPLE MAC
ページ13に含まれる内容の要旨
Also, if the signal cable is not connected to LCD monitor at all or properly, the monitor screen will display a message “ No Input Signal”. 13
