ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SER- VICEABLE PARTS INSIDE. REFER TO QUALIFIED PERSONNEL. The lighting flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilate
ページ3に含まれる内容の要旨
Safety Instructions Important safeguards for you and your new product Your product has been manufactured and tested with your safety in mind. However, improper use can result in potential electrical shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read and observe the following safety points when installing and using your new product, and save them for future ref- erence. Observing the simple precautions discussed in this booklet can hel
ページ4に含まれる内容の要旨
17) Attachments Example of Grounding According to National Do not use attachments not recommended by the product Electrical Code Instructions manufacturer as they may cause hazards. 18) Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surfac
ページ5に含まれる内容の要旨
Safety Instructions 26) Object and Liquid Entry 30) Safety Check Never push objects of any kind into this product through open- Upon completion of any service or repairs to this product, ings as they may touch dangerous voltage points or short-out ask the service technician to perform safety checks to deter- parts that could result in a fire or electric shock. Never spill liq- mine that the product is in proper operating condition. uid of any kind on the product. 31) Wall or Ceiling Mounting 27)
ページ6に含まれる内容の要旨
Caution Notice............................................................................................................................... 2 Safety Instructions.......................................................................................................................3-5 Remote Control Handset..............................................................................................................7-8 Controls......................................................................
ページ7に含まれる内容の要旨
Remote Control Handset Controls 1. POWER To turn on LCD display. 2. MUTE / OFF Press to turn off the sound. Press again or press volume +/- to restore the original volume. 3. DISPLAY Press to display the current channel on screen. 4. CC 1 2 Press to activate closed caption subtitles & teletext where available. 5. FREEZE Press to digitally freeze frame your signal source. Press again to return to live viewing. 6. SLEEP TIMER 3 4 Press repeatedly to set the sleep timer to OFF/30/60/90/120 minute
ページ8に含まれる内容の要旨
Your remote control handset is powered by two AAA type batteries. 1 2 3 To insert batteries, turn the remote Put the two batteries into the com- Replace the cover. control over and remove the battery partment with correct polarity. cover. To avoid damage from possible battery leakage, remove the batteries if you do not plan to use the remote control handset for an extended period of time. Do not mix batteries of different age and type. Always discard of used batteries safely. 8 Remote Control Ha
ページ9に含まれる内容の要旨
Controls of Front & Top Panel 1. MAIN POWER Turn on/off LCD TV. Press the power button in the lower right corner of the television to turn on/off LCD TV. When power is on, the LED indicator turns green, then the screen image will appear in a few seconds. When power is off, the LED indicator turns red. 2. MENU Activate the menu. Press the MENU button on the top left of the LCD TV to adjust your settings. 3. Channel/Function 56 Press the 56 button to select the channel in TV mode, or to navigat
ページ10に含まれる内容の要旨
Power Cord Input YPbPr1 and Audio 1 & YPbPr2 and Audio 2 RS232 (Reserved for Service Technicians only) When connecting to YPbPr(R/L), you can use YPbPr component video Subwoofer Output sources such as a progressive DVD player, HDTV decoder or satellite Outputs a subwoofer signal. receiver to obtain a picture with maximum resolution. For audio sound connect red and white audio cables. PC Audio Input For use in VGA or DVI modes only. Use this 3.5mm mini input jack S-Video / Audio3 Input to connec
ページ11に含まれる内容の要旨
Connection to External Equipment You may connect video equipment such as a DVD player, VCR, Cable/Satellite set top-box, camcorder etc. to your LCD TV. However please check with each product’s instruction booklet for specific information. Make sure that all electronics are unplugged before all con- nections are made. The diagrams shown may be different from your set. 1 2 Connecting Cable TV to TV Input Connecting Video Playback Equipment to TV Input 1. Connect the RF Out from your external video
ページ12に含まれる内容の要旨
3 4 For Good Performance Connecting Cable Set-Top Box/Video Connecting Video Equipment to S-Video Input Equipment to Composite Video Input - Connect to video equipment using optional yellow video and red - Connect to video equipment using optional S-Video and red and white audio cables. and white audio cables. How to connect How to connect Connect from video & audio output jacks on your ext. equipment Connect from S-Video & audio output jacks on your ext. to the LCD TV inputs labeled “AV IN”
ページ13に含まれる内容の要旨
Connection to External Equipment 5 6 For Better Performance For Best Performance Connecting Video Equipment to Connecting Video Equipment to DVI Input Component Video Input (HDTV SET-TOP-BOX, HDTV Satellite Receiver, (YPbPr1, YPbPr2) Personal Computer) - Connect to equipment using optional component video and - Connect to video equipment using optional DVI video cable red and white audio cables. and audio cable with 3.5mm stereo mini plug to two RCA connectors. How to connect - To watch HDTV b
ページ14に含まれる内容の要旨
7 Connecting Video Equipment to VGA Input (Digital SET-TOP-BOX, Personal Computer...etc.) - Connect to video equipment using an optional VGA cable and special audio cable. - To watch digitally broadcast programs, you must use a digital cable set-top box or satellite receiver. How to connect Connect from “VGA OUTPUT” to the LCD TV input labeled VGA. To connect an audio cable from your external equip- ment directly to the LCD TV, use of an optional 3.5mm stereo mini-plug to two RCA connectors is
ページ15に含まれる内容の要旨
Menu Adjustments TV Mode Menu adjustments are available to change the settings of your LCD TV to your preferences. Over the next few pages you will be shown how to adjust all available input sources & settings. 1 To select TV mode, press the INPUT button located on the remote or top of the LCD TV panel until chan- nels are displayed. Press the MENU button. Use 5/6 button to select each sub-menu. Once you’ve selected your desired sub-menu, press the3/4buttons and 5/6 buttons to select a desir
ページ16に含まれる内容の要旨
Menu adjustments are available to change the settings of your LCD TV to your preferences. 2 To select AV or S-Video mode, press the INPUT button located on the remote or top of the LCD TV panel until desired mode is displayed. Press the MENU button. Use 5/6 button to select each sub-menu. Once you’ve selected your desired sub-menu, press the3/4buttons and 5/6 buttons to select a desired setting, then press 3/4buttons to adjust. Display Advanced Audio System Highlight Contrast to increase Hig
ページ17に含まれる内容の要旨
Menu Adjustments Component (YPbPr1, YPbPr2) Modes Menu adjustments are available to change the settings of your LCD TV to your preferences. 3 To select YPbPr1 or YPbPr2 Component modes, press the INPUT button located on the remote or top of the LCD TV panel until desired mode is displayed. Press the MENU button. Use 5/6 button to select each sub- menu. Once you’ve selected your desired sub-menu, press the3/4buttons and 5/6 buttons to select a desired set- ting, then press 3/4buttons to adjus
ページ18に含まれる内容の要旨
Menu adjustments are available to change the settings of your LCD TV to your preferences. 4 To select VGA mode, press the INPUT button located on the remote or top of the LCD TV panel until VGA mode is displayed. Press the MENU button. Use 5/6 button to select each sub-menu. Once you’ve selected your desired sub-menu, press the3/4buttons and 5/6 buttons to select a desired setting, then press 3/4buttons to adjust. Display Geometry Audio System Highlight Contrast to increase Highlight Auto to
ページ19に含まれる内容の要旨
Menu Adjustments DVI Mode Menu adjustments are available to change the settings of your LCD TV to your preferences. 5 To select DVI mode, press the INPUT button located on the remote or top of the LCD TV panel until DVI mode is displayed. Press the MENU button. Use 5/6 button to select each sub-menu. Once you’ve selected your desired sub-menu, press the3/4buttons and 5/6 buttons to select a desired setting, then press 3/4buttons to adjust. Display Audio System Highlight Balance to adjust the
ページ20に含まれる内容の要旨
suitable for older kids MPAA TV Y7 G suitable for general audience V-Chip mode is a feature that Rating Rating parental guidance required PG PG parental guidance required allows the user to block or suitable for kids less than 13 years parents should be aware if the 14 PG-13 underparental supervision unblock television programming programs are suitable for children R rated, children under 17 should be based upon the MPAA ratings adults only MA accompanied by parents fantasy and violence FV NC-17
