ページ1に含まれる内容の要旨
User’s Guide
Dell P2314T
Dell P2714T
Regulatory model: P2314Tt / P2714Tt
ページ2に含まれる内容の要旨
NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2013 Dell Inc. All rights reserved. Information in this document is subject to change without notice. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
ページ3に含まれる内容の要旨
Contents About Your Monitor ..................................... 5 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Plug-and-Play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 LCD Mo
ページ4に含まれる内容の要旨
Troubleshooting ....................................... 35 Self-Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Built-in Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Common Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Touchscreen Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Product Specific Problems . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Appendix .....................
ページ5に含まれる内容の要旨
About Your Monitor Package Contents Your monitor ships with the components shown below. Make sure that you have received all the components and contact Dell if something is missing. NOTE: Some items may be optional and may not ship with your monitor. Some features or media may not be available in certain countries. NOTE: To set up with any other stand, see the documentation for the stand. Monitor with stand Power cable (varies by country) Power adapter HDMI cable USB 3.0 upstream cable
ページ6に含まれる内容の要旨
Screen cleaning cloth Velcro strap • Quick Setup Guide • Drivers and Documentation media • Product and Safety Information Guide Features The Dell P2314T and P2714T flat panel displays have an active matrix, thin-film transistor (TFT), liquid crystal display (LCD), and LED backlight. The monitor features include: • P2314T: 58.42 cm (23-inch) active area display (measured diagonally) 1920 X 1080 resolution (with full-screen support for lower resolutions). • P2714T: 68.58 cm (27-inch) active
ページ7に含まれる内容の要旨
Parts and Controls Front view Side-panel controls 1 2 Label Description 1 Function buttons (For more information, see Operating the Monitor) 2 Power On/Off button (with indicator light) Back View 1 2 5 3 4 Label Description Use 1 100 mm x 100 mm VESA mounting Wall mount monitor using holes (under VESA cover) 100 mm x 100 mm VESA‑compatible wall‑mount kit. 2 Regulatory label Lists the regulatory approvals. 3 Service Tag label (P2714T only) Refer to this label if you need to contact Dell for
ページ8に含まれる内容の要旨
Bottom View 10 1 2 4 3 5 6 7 8 9 Label Description Use 1 Powercable c ‑ onnector Connect the power cable. 2 DisplayPort connector Connect the DisplayPort cable. 3 HDMI (MHL) 1 port Connect your computer with HDMI cable or portable device with MHL cable (optional). 4 HDMI (MHL) 2 port Connect your computer with HDMI cable or portable device with MHL cable (optional). 5 VGA port To connect your computer to the monitor using a VGA cable (optional). 6 Audio line‑out port Connect speakers to play
ページ9に含まれる内容の要旨
Specifications Panel P2314T P2714T Screen type Active matrix - TFT LCD Panel type In-Plane Switching / Plane Plane to Line Switching to Line Switching Viewable image: Diagonal 58.42 cm (23 inches) 68.58 cm (27 inches) Horizontal (active area) 509.18 mm (20.05 inches) 597.89 mm (23.54 inches) Vertical (active area) 286.42 mm (11.28 inches) 336.31 mm (13.24 inches) 2 2 Area 145839.34 mm 201076.39 mm 2 2 (226.05 inch ) (311.67 inch ) Pixel pitch 0.265 mm 0.311 mm Viewing angle: Horizontal 178 de
ページ10に含まれる内容の要旨
Touch P2314T P2714T Type Projected Capacitive System Panel Diagonal 23.1 inch 27.1 inch Panel Thickness 2.4 mm 3.1 mm Active Area Extended beyond Viewing Area Sensor Stack thickness 0.5 mm Cover Glass Thickness 1.1 mm 1.8 mm Input Method Bare finger, thin gloves, conductive stylus Touch point 10 touch-points Response time <10 ms Output position resolution 32767 x 32767 Touch method Fingers and thin gloves Operating system Windows 8 certified Resolution Horizontal scan range 30 kHz – 83 k
ページ11に含まれる内容の要旨
Environmental Characteristics Temperature: Operating 0°C to 40°C (32°F to 104°F) Non-operating –20°C to 60°C (–4°F to 140°F) Humidity: Operating 10% to 80% (non-condensing) Non-operating 5% to 90% (non-condensing) Altitude Operating 5,000 m (16,400 ft) max Non-operating 12,191 m (40,000 ft) max Thermal dissipation: 88.7 BTU/hour (maximum) P2314T 58.0 BTU/hour (typical) 95.9 BTU/hour (maximum) P2714T 64.8 BTU/hour (typical) Preset Display Modes P2314T Horizontal Vertical Sync Polarity Pixel Cloc
ページ12に含まれる内容の要旨
P2714T Horizontal Vertical Sync Polarity Pixel Clock Display Mode Frequency Frequency (Horizontal/ (MHz) (kHz) (Hz) Vertical) 720 x 400 31.5 70.0 28.3 -/+ 640 x 480 31.5 60.0 25.2 -/- 640 x 480 37.5 75.0 31.5 -/- 800 x 600 37.9 60.0 40.0 +/+ 800 x 600 46.9 75.0 49.5 +/+ 1024 x 768 48.4 60.0 65.0 -/- 1024 x 768 60.0 75.0 78.8 +/+ 1152 x 864 67.5 75.0 108.0 +/+ 1280 x 1024 64.0 60.0 108.0 +/+ 1280 x 1024 80.0 75.0 135.0 +/+ 1600 x 900 60.0 60.0 108.0 +/- 1920 X 1080 67.5 60.0 148.5 +/+ Physica
ページ13に含まれる内容の要旨
Stand dimensions Height 298.4 mm (11.75 inches) 298.4 mm (11.75 inches) Width 352.0 mm (13.86 inches) 352.0 mm (13.86 inches) Depth 77.4 mm (3.05 inches) 77.4 mm (3.05 inches) Weight Weight with packaging 8.98 kg (19.76 lb) 11.49 kg (25.28 lb) Weight with stand 7.10 kg (15.62 lb) 9.39 kg (20.66 lb) assembly and cables Weight without stand without cables 4.82 kg (10.60 lb) 7.11 kg (15.64 lb) (For wall mount or VESA mount) Weight of stand assembly 1.46 kg (3.21 lb) 1.46 kg (3.21 lb) Power Mana
ページ14に含まれる内容の要旨
The OSD only function in the normal operation mode. If you press any button in Active-off mode, the following message is displayed: Pin Assignments VGA Pin number 15-pin side of Pin number 15-pin side of the cable the cable 1 Video-Red 9 Computer 5 V/3.3 V 2 Video-Green 10 GND-sync 3 Video-Blue 11 GND 4 GND 12 DDC data 5 Self-test 13 H-sync 6 GND-R 14 V-sync 7 GND-G 15 DDC clock 8 GND-B 14 About Your Monitor
ページ15に含まれる内容の要旨
HDMI Pin number 19-pin side of the port Pin number 19-pin side of the port 1 TMDS DATA 2+ 11 TMDS CLOCK SHIELD 2 TMDS DATA 2 SHIELD 12 TMDS CLOCK- 3 TMDS DATA 2- 13 Floating 4 TMDS DATA 1+ 14 Floating 5 TMDS DATA 1 SHIELD 15 DDC CLOCK (SDA) 6 TMDS DATA 1- 16 DDC DATA (SDA) 7 TMDS DATA 0+ 17 GROUND 8 TMDS DATA 0 SHIELD 18 +5 V POWER 9 TMDS DATA 0- 19 HOT PLUG DETECT 10 TMDS CLOCK DisplayPort (DP) Pin Number 20-pin side of the port Pin Number 20-pin side of the port 1 ML0(p) 11 GND 2 GND 12 ML3(n)
ページ16に含まれる内容の要旨
USB This section gives you information about the USB ports available on your monitor. Your computer has the following USB ports: • One USB 3.0 upstream port — back • Two USB 2.0 downstream ports — back • Two USB 3.0 downstream ports — left side NOTE: USB 3.0 functionality requires a USB 3.0 compatible computer. NOTE: The monitor’s USB ports work only when the monitor is on or in the power save mode. If you turn off the monitor and then turn it on, the attached peripherals may take a few s
ページ17に含まれる内容の要旨
Plug-and-Play You can install the monitor in any Plug-and-Play-compatible computer. The monitor automatically provides its Extended Display Identification Data (EDID) to the computer using Display Data Channel (DDC) protocols so the computer can configure itself and optimize the monitor settings. Most monitor installations are automatic; you can select different settings if desired. For Setting Up the Monitor more information about changing the monitor settings, see Operating the Monitor. L
ページ18に含まれる内容の要旨
Setting Up the Monitor Preparing the Stand NOTE: The stand is attached when the monitor is shipped from the factory. 1. Place the monitor on a soft cloth or cushion. 2. Pull the monitor stand arm upwards clear of the monitor. 3. Place the monitor upright. Connecting Your Monitor WARNING: Follow the safety instructions before you perform any of the procedures in this section. To connect your monitor to the computer: 1. Turn off your computer and disconnect the power cable from the wall outlet.
ページ19に含まれる内容の要旨
Connecting the VGA cable (cable sold separately) Connecting the DisplayPort (or miniDP) cable (cable sold separately) Connecting the HDMI cable Connecting the USB cable NOTE: The graphics used are for illustration purpose only. Appearance of the computer may vary. Setting Up the Monitor 19
ページ20に含まれる内容の要旨
Organizing Cables After you connect all necessary cables to your monitor and computer, use the cable- management slot to organize the cables. Wall Mounting (Optional) NOTE: Use M4 x 10 mm screws to mount your display. For more details, see the instructions that came with the VESA-compatible wall-mounting kit. 1. Place the monitor on a soft cloth or cushion on a stable flat table. 2. Remove the stand. 3. Use a screwdriver to remove the four screws that secure the back cover. 4. Attach the moun
