ページ1に含まれる内容の要旨
EMP Monitor
Operation Guide
ページ2に含まれる内容の要旨
EMP Monitor Operation Guide 1 Contents What You Can Do With EMP Monitor 2 Operating Environment ...........................................................2 Before Starting Operations......................................................2 Registering Projectors for Monitoring 3 Registration Using Automatic Detection..................................4 Registration Using IP Address (Manual Registration) .............5 Editing the Manually-Registered Projector List .......................5 Deleting
ページ3に含まれる内容の要旨
EMP Monitor Operation Guide 2 What You Can Do With EMP Monitor You can display status information on a computer screen for multiple Operating Environment projectors that are connected to a network and also carry out batch operations on all projectors such as turning the power on and off and changing the input * Macintosh computers cannot be used. source. A maximum of 64 projectors can be monitored and controlled by batch OS* 98SE/Me/NT4.0/2000 Professional/XP Home Edition/XP operations. Prof
ページ4に含まれる内容の要旨
EMP Monitor Operation Guide 3 Registering Projectors for Monitoring This operation is carried out when starting EMP Monitor for the first time after it has been installed and when you would like to add projectors. Once a projector has been registered, the status for the projector will be displayed automatically each time EMP Monitor is started from that point onwards. PROCEDURE Click "Start" - "Programs" (or "All Programs") - 1 "EPSON Projector" - "EMP Monitor" in that order to start EMP Mo
ページ5に含まれる内容の要旨
EMP Monitor Operation Guide 4 Registering Projectors for Monitoring Registration Using Automatic Detection TIP Projectors that have been registered using automatic detection will be re-detected on the basis of projector name each time EMP PROCEDURE Monitor is started. Click the "Auto detect" button in the "Register 1 If a password entry window is displayed, enter the password for the projector" window. projector's administrator and then click the "OK" button. If more than one projector w
ページ6に含まれる内容の要旨
EMP Monitor Operation Guide 5 Registering Projectors for Monitoring Registration Using IP Address (Manual Registration) Editing the Manually-Registered Projector List Use the following procedure to change the projector name or IP address for projectors that have been registered manually. PROCEDURE Click the "Manual registration" button in the PROCEDURE 1 "Register projector" window. Select the projector to be edited in the "Register 1 projector" window, and then click the "Edit" button. 2 Ente
ページ7に含まれる内容の要旨
EMP Monitor Operation Guide 6 Main EMP Monitor Window The main window shows the status information for each projector. To carry Button Functions our operations for projectors, select the projectors from the projector list and then click the buttons. The power can be turned on or off and the input source can be changed for the projectors that are selected from the projector list. The same operations can also be carried out using the commands in the "Tool" menu. "View details" Buttons Shows
ページ8に含まれる内容の要旨
EMP Monitor Operation Guide 7 Main EMP Monitor Window Understanding the Projector List Error information: If an error occurs with a projector, the following icons are used to show the status. The projector list uses the following icons to show the projector statuses. Replace with a new lamp. s "Replacing the Lamp" Status: Shows the projector status. End of lamp life warning in the "Replacing Power on and normal status Consumables" section of the User's Guide. Power off and normal status Ref
ページ9に含まれる内容の要旨
EMP Monitor Operation Guide 8 Main EMP Monitor Window Displaying Detailed Information You can check detailed information on the status of individual projectors that are connected. PROCEDURE Select the projector to be checked in the main 1 window. 2 Click the "View details" button. Click to display details. The details that are displayed may vary slightly depending on the projector connected. Detailed status information will be displayed in the "Details" window.
ページ10に含まれる内容の要旨
EMP Monitor Operation Guide 9 If a Projector Cannot be Monitored or Controlled Using EMP Monitor Cause Remedy Is the projector connected to Connect the network cable correctly. s the network correctly? "Network Cable Connections" in the User's Guide Has the projector been set Check the projector's network settings. up correctly for connection If using EMP-835 s"Connecting in to the network? Access Point Mode or Wired LAN Mode" in the EasyMP Network Setup Guide If using EMP-830 s"Projector Ne
ページ11に含まれる内容の要旨
EMP Monitor Operation Guide 10 All rights reserved. No part of this publication may be reproduced, General Notice: stored in a retrieval system, or transmitted in any form or by any EPSON is a registered trademark of SEIKO EPSON means, electronic, mechanical, photocopying, recording, or CORPORATION. otherwise, without the prior written permission of SEIKO EPSON Macintosh, Mac, and iMac are registered trademarks of Apple CORPORATION. No patent liability is assumed with respect to the Comp
