ページ1に含まれる内容の要旨
H1781
ページ2に含まれる内容の要旨
English glish Operation Instructions Thank you for purchasing this monitor, a high-resolution multi-scan color monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This monitor has been tested and found compliant with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection against harmful interference to a resid
ページ3に含まれる内容の要旨
English Content Safety Precautions.............................................................................1 First Setup .........................................................................................2 Quick Installation.............................................................................2-3 Front View of the Product .................................................................. 4 Rear View of the Product ........................................................
ページ4に含まれる内容の要旨
English glish Safety Precautions This monitor is manufactured and tested on a ground principle that a user’s safety comes first. However, improper use or installation may result danger to the monitor as well as to the user. Carefully go over the following WARNINGS before installation and keep this guide handy. WARNINGS: This monitor should be operated only at the correct power sources indicated on the label on the rear end of the monitor. If you’re unsure of the power supply in yo
ページ5に含まれる内容の要旨
English First Setup Congratulation for purchasing this monitor of high performance! This monitor comes with the following accessories: Power Cable D-Sub Cable (15 pin) User’s Guide Quick Start Guide Warranty Documents Quick Installation Installing & Removing the Base Install Remove 2
ページ6に含まれる内容の要旨
English Connecting the Monitor 1. Connect Power Cable Connect the power cable to the back of the monitor. Plug the power cable to a nearby power outlet. 2. Connect Analog video cable (D-Sub cable) Make sure both monitor and computer are powered OFF. Connect the video cable ( D-Sub cable) to the computer, then to the monitor. 3. Power-ON computer and monitor Power-ON the computer, then Power-ON the monitor. 4. Windows users: Setting the Timing Mode (Resolution and Refresh Rate) Exa
ページ7に含まれる内容の要旨
English glish Front View of the Product ➊ ➋ ➌ ➍ ➎ ➏ ➊ OSD TURN ON/OFF ➍ CONFIRM SELECTION ➋ SCROLL DOWN/DECREASE ➎ POWER ON/OFF ➌ SCROLL UP/INCREASE ➏ LED INDICATOR Rear View of the Product ➐ ➑ ➐ POWER INPUT ➑ VGA CABLE (D-SUB 15 PIN) 4
ページ8に含まれる内容の要旨
English Using On Screen Display (OSD) Functions 1 Display main menu. Exit from OSD menu. 2 Auto adjust the image when not in main menu. Confirm the selection. or Select the desired item when in OSD menu. When not in OSD menu, it is to immediately activate Contrast/ Brightness. It should be change to Contrast/ Brightness by pressing button 2. ▼ + ▲ Recall both of Contrast and Brightness. 1 + ▼ Power Lock (when not in OSD menu) 1 + ▲ OSD Lock (when not in OSD menu ) Main Menu
ページ9に含まれる内容の要旨
English glish Short Cuts Function from the button(s) Auto Adjust : To auto adjust Horizontal Position, Vertical Position, Phase (Fine Tune) and Clock (H. Size) of the screen. Contrast : To adjust the foreground white level of screen image. : increase contrast, : decrease contrast. Brightness : To adjust the luminance of the video. : increase brightness, : decrease brightness. Color Adjust : To select the color for improving brightness and color saturation between 930
ページ10に含まれる内容の要旨
English Sharpness : To adjust the clarity of a non-SXGA (1280x1024) signal with or button. Setup Menu : To set up Language Select, Resolution Notice, OSD Position, and OSD Time Out. Language Select : To allow users to choose from available languages. Resolution Notice : Resolution Notice is to remind you set the best quality for the image. Choose “Enable” : Every 30 seconds, it will show a window “ For best picture quality change resolution to 1280 x 1024” to remind you
ページ11に含まれる内容の要旨
English glish Supporting Timing Modes VESA 720 x 400 @ 70Hz VESA 640 x 480 @ 60Hz MAC 640 x 480 @ 67Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 56Hz VESA 800 x 600 @ 60Hz VESA 800 x 600 @ 72Hz VESA 800 x 600 @ 75Hz MAC 832 x 624 @ 75Hz VESA 1024 x 768 @ 60Hz VESA 1024 x 768 @ 70Hz VESA 1024 x 768 @ 75Hz VESA 1280 x 1024 @ 60Hz VESA 1280 x 1024 @ 75Hz Warning : Do not set the graphic card in your computer to exceed these maximum refresh rates. Doing so may resu
ページ12に含まれる内容の要旨
English Technical Information Technical Specification LCD Panel 17.0” TFT Power Management Energy Star compliant VESA DPMS compatible < 1 W Displayable Resolution SXGA 1280 x 1024 max. Vertical Frequency 75Hz max. Pixel Dimension 0.264 x 0.264 mm LCD Display Color 16.2M (6 bits + FRC/ color) Tilt 0°~20° Active Display Area 337.9 mm x 270.3mm Temperature Operating: 0°C ~ +40°C Storage: -20°C ~ + 60°C Compliance cULus, CE, FCC-B, Energy Star, ISO 13406-2 Power Input Volt
ページ13に含まれる内容の要旨
English glish Care and Maintenance Care Avoid exposing your monitor directly to sunlight or other heat source. Place your monitor away from the sun to reduce glare. Put your monitor in a well ventilated area. Do not place any heavy things on top of your monitor. Make certain your monitor is installed in a clean and moisture-free area. Keep your monitor away from magnets, motors, transformers, speakers, and TV sets. Note Move the LCD out of the package and take off the
ページ14に含まれる内容の要旨
English Wrong or abnormal colors If any colors (red, green, blue) are missing, check the video cable to make sure it is securely connected. Loose or broken pins in the cable connector could cause an improper connection. Connect the monitor to another computer. 11
